Programmable group-delay module using binary polarization switching

We demonstrate the first programmable group-delay module based on polarization switching. With a unique binary tuning mechanism, the device can generate any differential group delay value from -45 to +45 ps with a resolution of 1.40 ps, or any true-time-delay value from 0 to 45 ps with a resolution of 0.7 ps. The delay varying speeds for both applications are under 1 ms and can be as fast as 0.1 ms. We evaluate both the dynamic and static performances of the device while paying special attention to its dynamic figures of merit for polarization-mode dispersion emulation and compensation applications. Our experiment shows that the device exhibits a negligible transient-effect induced power penalty (<0.2 dB) in a 10-Gb/s nonreturn-to-zero system.     

Origin of the threshold voltage instability in SiO/sub 2//HfO/sub 2/ dual layer gate dielectrics

The magnitude of the V/sub T/ instability in conventional MOSFETs and MOS capacitors with SiO/sub 2//HfO/sub 2/ dual-layer gate dielectrics is shown to depend strongly on the details of the measurement sequence used. By applying time-resolved measurements (capacitance-time traces and charge-pumping measurements), it is demonstrated that this behavior is caused by the fast charging and discharging of preexisting defects near the SiO/sub 2//HfO/sub 2/ interface and in the bulk of the HfO/sub 2/ layer. Based on these results, a simple defect model is proposed that can explain the complex behavior of the V/sub T/ instability in terms of structural defects as follows. 1) A defect band in the HfO/sub 2/ layer is located in energy above the Si conduction band edge. 2) The defect band shifts rapidly in energy with respect to the Fermi level in the Si substrate as the gate bias is varied. 3) The rapid energy shifts allows for efficient charging and discharging of the defects near the SiO/sub 2//HfO/sub 2/ interface by tunneling.     

PMMA tacticity and alumina powder dispersion stability

Summary Sedimentation experiments and X-ray photoelectron spectroscopy (XPS or ESCA) analyses have been used to study the effect of poly(methylmethacrylate) (PMMA) tacticity on aluminum oxide powder dispersion stability in a common solvent medium. The relative trends from sedimentation densities, and from surface analyses after solvent washing show that (PMMA) adsorption is greatest with isotactic polymer, where isotactic>atactic>syndiotactic adsorption. These results suggest that surface adsorption and hence dispersion stability can be influenced by polymer chain configuration as well as by chain conformation.     

Significance of DNA ploidy in the treatment of T1 glottic carcinoma

OBJECTIVE: To assess the role of DNA ploidy as a predictor of radioresistance in T1 glottic carcinoma. DESIGN: Case-control study. Flow cytometric DNA ploidy measurements were performed on formalin-fixed paraffin-embedded tumor specimens from 15 patients with T1 glottic laryngeal carcinomas in whom radiotherapy had failed and from a matched group of 15 patients in whom an identical radiotherapy regimen was curative. Analysis of DNA content was performed blind to outcome of treatment. SETTING: Academic tertiary referral medical center. PARTICIPANTS: Thirty patients with clinically staged T1, N0, M0 glottic carcinoma. INTERVENTION: All patients received radiation to the larynx through opposed lateral ports at a total dose of 64 to 70 Gy. RESULTS: Ten diploid and five aneuploid histograms were found in the resistant group, and six diploid and nine aneuploid histograms were found in the radiosensitive group. This difference was not statistically significant. A trend toward a higher relapse rate after radiotherapy (62.5%) among patients with diploid tumor compared with those with aneuploid tumor (35.7%) was noted. CONCLUSIONS: DNA ploidy did not predict response to radiotherapy in patients with T1 glottic cancer, probably because of the small number of patients. A trend toward lower risk of local recurrence after radiotherapy in aneuploid tumors was noted. A larger prospective study is needed to assess the value of DNA ploidy in the treatment of early laryngeal cancer.     

89-GHz fT room-temperature silicon MOSFETs

The authors report the implementation of deep-submicrometer Si MOSFETs that at room temperature have a unity-current-gain cutoff frequency (f_T) of 89 GHz, for a drain-to-source bias of 1.5 V, a gate-to-source bias of 1 V, a gate oxide thickness of 40 Å, and a channel length of 0.15 μm. The fabrication procedure is mostly conventional, except for the e-beam defined gates. The speed performance is achieved through an intrinsic transit time of only 1.8 ps across the active device region     

Characterization of charge trapping in submicrometer NMOSFET's bygate capacitance measurements

Trapping of net positive charge at low gate stress voltage, and of net negative charge at high gate stress voltage, is observed through changes in the gate-to-drain capacitance of the stressed junction. These observations can be explained in terms of electron trapping, hole trapping, and generation of acceptor-like interface states located in the upper half of the bandgap. Channel shortening is also observed and found to exhibit a logarithmic time dependence     

火电厂实施废水零排放的可行性探讨

对合肥发电厂的用排水现状进行了介绍，并提出了实施废水零排放的可行性方案。     

A neural network compensator for uncertainties of roboticsmanipulators

A neural network controller for trajectory control of robotic manipulators that is used not to internalize the inverse dynamic model of the controlled object but to compensate only the uncertainties of the robotic manipulator is presented. Its performance is compared with that of the conventional adaptive scheme. The results show the ability of the neural network controller to adapt to unstructured effects. A learning method for the neural network compensator with true teaching signals is shown. The tracking error of the robotic manipulator was greatly reduced when this controller was used