Fabrication of dense nano-laminated tungsten carbide materials doped with Cr3C2/VC through two-step sintering

This work investigates the critical roles of two-step sintering (TSS) and laminated structure on the sintering behavior and mechanical properties of functionally graded WC-TiC-Al₂O₃ nanostructured composite materials doped with Cr₃C₂/VC. Results show that excellent mechanical properties are achieved for tailored TSS conditions with a hardness of 27.91?±?2.3?GPa and a flexural strength of 1423.3?±?23.5?MPa. The desirable mechanical properties are attributed to the suppressed grain growth without densification deterioration. TSS is more effective in facilitating the favorable dispersion of secondary phase toughening nano-particulates in a WC matrix than conventional sintering (CS). Cr₃C₂/VC dopant plays an important role in maximizing and shifting the temperature range of the kinetic window for WC-Al₂O₃ composites. Al₂O₃ crack deflection, transgranular Al₂O₃, microcracking, WC crack bridging and plate-like WC crack deflection are the major toughening mechanisms. Residual surface compressive stress induced by the graded structure is also an appreciated contribution to the improvement of mechanical properties.     

黄浦江下游吴淞口站低潮位重现期研究

黄浦江为感潮河流,低潮位重现期的确定对黄浦江航道的设计具有重要意义。为了准确估计黄浦江低潮位的重现期,以黄浦江下游吴淞口站年最低潮位序列为例,在对样本进行三性审查的基础上,分别采用传统的数理统计方法和时变矩方法进行水文频率分析。结果表明:吴淞口站年最低潮位序列在1996年发生了变异;还现修正后的序列服从位置参数线性时变的GEV模型,低潮位存在缓慢的上升趋势;一致性条件下百年一遇低潮位约为0.261 m,在非一致性条件下其重现期增大为150 a。非一致性条件下的重现期增大说明黄浦江现有的航道设计标准偏安全,航道通航保证率提高。     

基于三相幅度测量的相控阵天线快速校准方法

提出了一种基于三相幅度测量的相控阵天线快速校准方法。该方法将天线阵列进行分组,利用每种分组在三种配相下的阵面合成场幅度测量值,可解算出各个天线单元的初始幅相值。该方法仅需幅度测量,避免了相位测量误差影响单元幅相值的计算精度,而且所需幅度测量次数仅为(2N+1)次,可显著提高校准时效性。另外,利用分组思想,同时改变多个单元相位,使总辐射场的幅度变化显著,提升校准准确性。仿真结果表明:校准后相位均方根误差为2.2°,幅度均方根误差为0.2 dB。     

Transparent niobate glass-ceramics for optical limiting

The construction of nonlinear optical materials featuring asymmetric transmission of light is of great technological importance for various applications, including optical switching and optical power limiting. A significant challenge is the scalable fabrication of material candidates with good photochemical stability, high optical transmittance, and excellent optical limiting performance. Here, we present a nanocrystallization avenue for constructing hybrid optical limiting materials that exhibit ultrafast and robust optical limiting performance. The experimental results show that the controllable relaxation of a niobate glass may lead to the clustering of Nb-O units and contracting of the bandgap. It results in the notable improvement in nonlinear optical properties, including the enhanced saturation irradiance (380 GW/cm²), doubly increased nonlinear coefficient, and decreased limiting threshold (200 GW/cm²). Our results suggest a promising material that exhibits promising applications for protecting eyes and sensitive components from laser-induced damage.     

Effect of an abrupt change in pulling rate on microstructures of directionally solidified Al2O3-Er3Al5O12 eutectic and off-eutectic composite ceramics

Directionally solidified microstructures of Al₂O₃-Er₃Al₅O₁₂ eutectic and off-eutectic in situ composite ceramics were explored under abrupt-change pulling rate conditions. Corresponding temperature distributions and interface locations were studied. In eutectic composition, fluctuation of eutectic spacing occurred when the pulling rate increased abruptly. A gradually increase or abrupt increase in eutectic spacing was observed when the pulling rate decreased abruptly. In hypoeutectic and hypereutectic compositions, formation of the primary phases were suppressed when the pulling rate increased abruptly from 10?µm/s to 100?µm/s, while primary phases precipitated when the pulling rate decreased abruptly from 100?µm/s to 10?µm/s. The interface altitude decreased after the pulling rate increased abruptly, but increased after the pulling rate decreased abruptly. The liquid composition restriction (around the eutectic composition) at the eutectic interface plays an important role in the suppression of the primary dendrite and coupled eutectic oxides can be obtained in off-eutectic compositions even under higher solidification rate conditions.     

胸腺五肽辅助治疗肺癌对免疫功能影响及其疗效的系统评价

为了系统地评价胸腺五肽作为辅助药物治疗各种肺癌的疗效及其对机体免疫功能的影响，利用电子检索收集有关胸腺五肽联合放疗或化疗方案治疗肺癌的临床随机对照试验文献，对符合纳入标准的文献，采用RevMan5.3 软件进行系统评价。最终共纳入文献 9 篇，总样本量 784 例。Meta 分析结果表明，胸腺五肽作为辅助药物治疗各种肺癌提高总有效率的差异无统计学意义[OR ＝ 1.44, 95%CI(0.99, 2.10), P ＝0.06 ＞ 0.05]。在对免疫功能的影响方面，胸腺五肽的使用显著增高外周血中的 CD3+ 细胞水平[OR ＝ 5.88, 95% CI(2.34, 9.42), P ＝0.001]，CD4+ 细胞水平也显著上升[OR ＝8.32, 95%CI(5.22, 11.42), P ＜ 0.00001] , CD4＋ /CD8＋比值也有明显的提高[OR ＝ 0.38, 95% CI(0.18, 0.59), P＝0.0002]，但 CD8+ 细胞水平的差异无统计学意义[OR ＝－3.12, 95% CI ( －9.02, 2.79), P ＞0.05]。总的来说，本研究在一定程度上反映了在辅助治疗肺癌方面，胸腺五肽能显著提高外周血中的 CD3+ 细胞水平、CD4+ 细胞水平、CD4+/CD8+ 比值。而对于治疗的有效率、CD8+ 细胞水平，差异无统计学意义。     

课程群案例嵌入协同教学模式的探索

在课程群的教学中由于每门课程各自独立开展教学,缺乏知识的融合和衔接,导致学生运用综合知识解决问题的能力较弱。在课程群的教学中采用案例嵌入协同教学模式,将完整的工程案例嵌入到课程群各门课程的教学中,协同规划各门课程的教学任务,每门课程再围绕案例展开研究性教学。通过嵌入的工程案例衔接各门课程的知识点,帮助学生建构完整的知识体系,强化工程应用的概念；同时通过研究性教学,培养学生分析问题和解决问题的能力,两部分相结合,提高了学生运用综合知识解决复杂问题的能力。     

空分设备气动式阀门与入口导叶的技改与维护检修

介绍了空压机防喘振阀与入口导叶、氧气输送阀与放空阀、分子筛吸附器切换阀存在问题及改造措施,阐述了空分设备低温与常温气动阀门、氮压机入口导叶存在问题及维护检修措施。     

PCB废水总氮处理达标的工艺探讨

对PCB废水总氮的处理,从源头削减、分质收集、分质预处理到末端处理提出了多种方法,着重分析了MAP+管式微滤膜处理氨氮废水、多级组合式RO处理硝态氮废水和A2O+MBR处理综合废水,提出PCB废水总氮达标的组合工艺,项目建成后达到预期效果。