SiC颗粒尺寸及含量对SiCp／2024Al复合材料性能的影响

本文对粉末冶金法制备的SiCp/2024Al复合材料的性能进行了研究。随SiC颗粒尺寸的增大,复合材料的强度降低,而塑性和磨损抗力则增加。SiC颗粒尺寸对复合材料的物理性能没有什么影响。增加SiC颗粒含量,复合材料的强度、模量均增大,磨损抗力亦明显增加,而塑性和热膨胀系数则降低。     

超声跟踪法制作误差对器件性能的影响及补偿

研究发现快模入射超声跟踪氧化碲器件的布喇格损耗频响对于参数误差十分敏感,因而制作误差可能对器件性能有较大影响。本文系统研究了这种影响及其补偿方法,结果表明,当相邻两换能片之间中心距S有5%的误差和声偏置角丫_0有10%的误差时,通过调整入射角θ_1可作出完全的补偿。     

浙江省散装水混连续全国夺魁原因剖析

浙江是水泥产量较大的省份之一，但散装水泥曾在较长时期里处于落后状态。1986年全省水泥散装量只有8.82万吨，散装率仅为0.91%，列全国倒数第二位。1987年开始，加强了散装水泥工作的领导，真抓实干，连续10多年跨越式快速发展。2000、2001连续两年散装量跃居全国第一。去年，全省完成散装量1834万吨，散装率38.51%，高出全国平均水平16.88个百分点。 总结这十几年浙江省散装水泥持续快速发展的主要原因，可以概括为“三个有”，即：有符合省情的政策法规，有良好的舆论氛围，有敬业爱岗的管理工作队伍。　　有符合省情的政策法规　“依…     

工程变更及其管理

本文以京秦高速公路 (廊坊段 )为例介绍了在机电工程实施中针对工程变更采用的一套严密科学的工程变更管理程序。履约各方在执行程序过程中 ,职责分明 ,有效地保证了整个项目的顺利实施。     

Nanoparticles and Their Effective Use in the Technology of Highly Concentrated Binding Suspensions (HCBS) and Refractory Castables. Part 1

General aspects (including terminology) related to the use of ultradisperse particulates (nanosystems) are discussed. The important role of nanoparticles in the technology of highly concentrated binding suspensions (HCBS) and refractory castables is emphasized. Using nanoparticles provides a route toward improving the rheotechnologic properties of HCBS and HCBS-based molding mixtures as well as the structure and service properties of the end product.     

Characterization of Dip-Coated Boron Nitride on Silicon Carbide Fibers

Amorphous boron nitride thin coatings (∼0.2 μm) have been formed on Nicalon and C-Nicaion (pre-carbon-coated Nicalon) yarns via dip coating in boric acid solution followed by heating and nitriding in NH₃gas at 1000°C. X-ray photoelectron spectroscopy (XPS) and Auger electron spec-troscopy (AES) studies have shown the formation of boron nitride. The coating was boron rich and contains oxygen. The N/B and O/B ratios range from 0.6 to 0.8 and from 0.1 to 0.25, respectively. Tensile strength measurements revealed that the BN-coated C-Nicalon yarn maintained ∼85% of its original strength while BN-coated Nicalon lost ∼85% of its original strength. Auger depth profiles showed that there was a consumption of carbon during the heating and nitridation process for both BN-coated Nicalon and C-Nicalon fibers. However, the depletion of carbon in BN-coated Nicalon fibers was much more severe than that in BN-coated C-Nicalon fibers.     

Optimal Hybrid Control for Structures

A new method for integrated design of passive and active elements is presented. Rather than the existing qualitative selection of parameters for passive elements, a quantitative approach is proposed that finds optimal active and passive parameters with respect to an H₂/H_∞ performance requirement. This new approach automatically yields passive designs when the given performance limits are high enough and active (hybrid) designs when the given performance constraints are stringent. Furthermore, our algorithm finds the special performance requirement (the peak of the frequency response) that cannot be satisfied by any passive design. Hence this article shows how to determine when control is required rather than assuming a priori that it is or is not required. A simple design method given herein yields either passive, active, or hybrid designs depending only on the level of the performance constraints that are specified in the statement of the problem.     

Influence of oxygen on the ion-beam synthesis of silicon carbide buried layers in silicon

The properties of silicon structures with silicon carbide (SiC) buried layers produced by high-dose carbon implantation followed by a high-temperature anneal are investigated by Raman and infrared spectroscopy. The influence of the coimplantation of oxygen on the features of SiC buried layer formation is also studied. It is shown that in identical implantation and post-implantation annealing regimes a SiC buried layer forms more efficiently in CZ Si wafers or in Si (CZ or FZ) subjected to the coimplantation of oxygen. Thus, oxygen promotes SiC layer formation as a result of the formation of SiO_x precipitates and accommodation of the volume change in the region where the SiC phase forms. Carbon segregation and the formation of an amorphous carbon film on the SiC grain boundaries are also discovered. Fiz. Tekh. Poluprovodn. 32, 1414–1419 (December 1998)     

上海市吴淞工业区大气PM2.5水溶成分的元素分析及细胞毒性研究

通过ICP-MS测定了上海市吴淞地区大气PM2.5水溶成分金属元素含量,通过四唑盐(MTT)测定细胞存活率,通过超氧化歧化酶(SOD)和丙二醛(MDA)两个指标测定细胞氧化损伤,琼脂糖凝胶电泳测定细胞内DNA损伤,流式细胞仪(Flow cytometry)检测细胞凋亡和周期等实验研究了大气PM2.5水溶成分的细胞毒性.实验结果表明:PM2.5可溶成分中Zn元素含量最高,PM2.5在一定浓度范围内能导致细胞死亡,引起细胞的氧化损伤,影响DNA的复制,阻碍细胞增殖,但没有诱导细胞凋亡.PM2.5中可溶金属离子对细胞毒性表现为联合作用.