一种检查水轮发电机定子绕组接头绝缘质量的方法

0　引言《电力设备预防性试验规程》(DL /T 5 96 -1 996 )中 ,在“容量为 6 MW及以上的同步发电机的试验项目、周期和要求”的条款里 ,关于“定子绕组端部手包绝缘施加直流电压测量”这一项 ,该规程指明该试验项目适用于 2 0 0 MW及以上的国产水氢氢汽轮发电机。而广东省新丰江水电厂的应用结果表明 ,该试验方法用来检查风冷水轮发电机定子线棒接头绝缘的好坏 ,也具有很高的准确性 ,完全可以将其作为一种检查水轮发电机定子绕组接头绝缘好坏的有力的辅助试验方法。本文就该试验方法及其在新丰江水电厂水轮发电机上的应用情况作一介绍。1…     

Structural study of cubic pyrochlores based on quantum mechanical simulation

In the ideal A₂B₂O₆O′ pyrochlore structure, the x-value of O atom position is a variable parameter. In Bi_1.5ZnNb_1.5−xTa_xO₇ (BZNT) cubic pyrochlores, the x-values alter with the different compositions of Nb/Ta. In this work, a series of initial models for BZNT were established by analyzing X-ray diffraction data. Then three structure modifying methods, including Rietveld refinement, Rietveld refinement with energy and geometry optimization based on quantum mechanics, were employed to obtain the precise models using Materials Studio. Moreover, the reflectivities of BZNT were computed by quantum mechanical simulation based on the refined models. Comparing the simulation results from different modifying models with the experimental results, it is found that Rietveld refinement with energy optimization is the most accurate method for BZNT pyrochlores. According to the simulation results, the different reflectivities correspond well with various x-values of O atom positions in BZNT pyrochlores.     

工程建设安全工作的特点及管理对策

从施工环境、施工现场、管理对象等方面简要介绍了工程建设过程中的安全工作特点，并针对工程建设安全工作的特点提出了通过合同明确建设单位、设计单位、监理单位、施工单位和经营单位的安全责任、建立安全管理机构、强化安全教育及培训等对策。     

调整水量法(代用法)测定水泥标准稠度用水量方法的改进

结合兰州市的水泥标准稠度用水量方法测定 (代用法 )的实例 ,分析代用法测定标准稠度用水量的缺点 ,并对此方法提出了一些改进措施     

海底管道系统失效故障树的建立及定性分析

受自然环境、管道腐蚀、第三方破坏及管理不善等因素的影响,海底管道系统在铺设及运行过程中常常会失效。文中以海底管道穿孔、凝管、断裂和设备故障等主要失效形式为顶事件建立了海底管道系统失效故障树,通过系统的定性分析得到了海底管道系统失效故障树的37个一阶最小割集,进而确定了影响海底管道系统失效的4项主要因素,并针对这些主要因素提出了相应的解决问题的措施。     

Face recognition using elastic local reconstruction based on a single face image

In this paper, we propose a new face recognition algorithm based on a single frontal-view image for each face subject, which considers the effect of the face manifold structure. To compare two near-frontal face images, each face is considered a combination of a sequence of local image blocks. Each of the image blocks of one image can be reconstructed according to the corresponding local image block of the other face image. Then an elastic local reconstruction (ELR) method is proposed to measure the similarities between the image block pairs in order to measure the difference between the two face images. Our algorithm not only benefits from the face manifold structure, in terms of being robust to various image variations, but also is computationally simple because there is no need to build the face manifold. We evaluate the performance of our proposed face recognition algorithm with the use of different databases, which are produced under various conditions, e.g. lightings, expressions, perspectives, with/without glasses and occlusions. Consistent and promising experimental results were obtained, which show that our algorithm can greatly improve the recognition rates under all the different conditions.     

Average consensus in networks of dynamic agents with switching topologies and multiple time-varying delays

In this paper, we discuss average consensus problem in undirected networks of dynamic agents with fixed and switching topologies as well as multiple time-varying communication delays. By employing a linear matrix inequality method, we prove that all the nodes in the network achieve average consensus asymptotically for appropriate communication delays if the network topology is connected. Particularly, several feasible linear matrix inequalities are established to determine the maximal allowable upper bound of time-varying communication delays. Numerical examples are given to demonstrate the effectiveness and the sharpness of the theoretical results.     

Investigation of Mechanical and Electrical Characteristics for Cracked Conductive Particle in Anisotropic Conductive Adhesive (ACA) Assembly

In an anisotropic conductive adhesive (ACA) assembly, the electrical conduction is usually achieved with the conductive particles between the bumps of integrated circuit (IC) and corresponding conductive tracks on the glass substrate. Fully understanding of the mechanical and electrical characteristics of ACA particles can help to optimize the assembly process and improve the reliability of ACA interconnection. Most conductive particles used in the ACA assembly are with cracks in the metal coating of the particles after the ACA bonding. This paper introduced the fracture analysis by applying the cohesive elements in the numerical model of the nickel-coated polymer particle and further simulating the cracks initiation and propagation in the nickel coating during the ACA bonding. The simulation results showed that the stress distribution on the nickel-coated particle with cracks was significantly different from that on the nickel-coated particle without crack, indicating that the stress analysis by taking the crack into consideration is very important for the reliability assessment of the ACA interconnection. The stress analysis of cohesive elements indicated that the cracks initiated at the central area of the nickel coating and propagated to the polar area. Furthermore, by the introduction of a new parameter of the virtual resistance, a mathematical model was established to describe the electrical characteristics of the nickel-coated particle with cracks. The particle resistance of the nickel-coated particle with cracks was found to be much higher than that of the particle without crack in the optimized bonding pressure range, indicating that it is necessary to take the crack into consideration for the particle conduction analysis as well. Therefore, the fracture analysis on the conductive particle by taking the crack into consideration could accurately evaluate the reliability of ACA interconnection and avoid serious reliability issues.