Secondary electron emission and surface charging evaluation of alumina ceramics and sapphire

The breakdown of alumina rf windows is mostly caused by multipactor, as well as by material defects and contamination. Since multipator induces localized surface heating, leading to surface melting, it is necessary to observe secondary electron emission (SEE) coefficients of alumina ceramics under high temperature conditions. The SEE coefficients of commercial alumina ceramics and sapphire were measured by a scanning electron microscopy (SEM) with a single short-pulsed electron beam (100 pA, 1 ms) at room temperature and at 650degC. Additive materials used for sintering alumina, such as SiO ₂ and MgO, were also investigated. Surface charging evaluations have also become important because the accumulated charges are discharged at the threshold Held, resulting in surface discharge. The surface charging evaluations were carried out by multi-pulse measurements with the injection of successive pulses on the sample. As a result, reductions in the SEE coefficients with temperature were confirmed, except for sapphire. The multi-pulse measurement results indicated that surface charging of the sapphire was higher than that of other samples. This may be one of the factors that causes sapphire not to be durable for rf window applications, compared with alumina ceramics. Although there are few exceptions, it was found that the SEE coefficients of alumina ceramics increased with the purity and the average grain size     

Production of Lacto-N-biose I Using Crude Extracts of Bifidobacterial Cells

Lacto-N-biose I (LNB) is supposed to represent the bifidus factor in human milk oligosaccharides, and can be practically produced from sucrose and GlcNAc using four bifidobacterial enzymes, 1,3-β-galactosyl-N-acetylhexosamine phosphorylase, sucrose phosphorylase, UDP-glucose-hexose 1-phosphate uridylyltransferase, and UDP-glucose 4-epimerase, recombinantly produced by Escherichia coli. Here the production of LNB by the same enzymatic method without using genetically modified enzymes to consider the use of LNB for a food ingredient was reported. All four enzymes were produced as the intracellular enzymes of Bifidobacterium strains. The mixture of the crude extracts contained all four enzymes, with other enzymes interfering with the LNB production, namely, phosphoglucomutase, fructose 6-phosphate phosphoketolase, and glycogen phosphorylase. The first two interfering enzymes were selectively inactivated by heat treatment at 47 °C for 1 h in the presence of pancreatin, and glycogen phosphorylase was disabled by hydrolyzing its possible acceptor molecules using glucoamylase. Finally, 91 % of GlcNAc was converted into LNB in the 100-mL reaction mixture containing 300 mM GlcNAc.     

Colossal Barocaloric Effect by Large Latent Heat Produced by First-Order Intersite-Charge-Transfer Transition

Materials which show novel thermal properties can be used to make highly efficient and environmentally friendly energy systems for thermal energy storage and refrigeration through caloric effects. An A-site-ordered quadruple perovskite-structure oxide, NdCu₃Fe₄O₁₂, is found to release significant latent heat, 25.5 kJ kg⁻¹ (157 J cc⁻¹), at the intersite-charge-transfer transition temperature near room temperature. The transition is first-order and accompanied by an unusual magnetic ordering and a large negative-thermal-expansion-like volume change, and thus, it causes a large entropy change (84.2 J K⁻¹ kg⁻¹). The observed entropy change is comparable to the largest changes reported in inorganic solid materials, and more importantly, it is utilized through a colossal barocaloric effect. The adiabatic temperature change by applying 5.1 kbar pressure is estimated to reach 13.7 K, which means efficient refrigeration can be realized through this effect.     

Example-based color transformation of image and video using basic color categories.

Color transformation is the most effective method to improve the mood of an image, because color has a large influence in forming the mood. However, conventional color transformation tools have a tradeoff between the quality of the resultant image and the amount of manual operation. To achieve a more detailed and natural result with less labor, we previously suggested a method that performs an example-based color stylization of images using perceptual color categories. In this paper, we extend this method to make the algorithm more robust and to stylize the colors of video frame sequences. We present a variety of results, arguing that these images and videos convey a different, but coherent mood.     

A channel-erasing 1.8-V-only 32-Mb NOR flash EEPROM with a bitlinedirect sensing scheme

A 1.8-V-only 32-Mb NOR flash EEPROM has been developed based on the 0.25-μm triple-well double-metal CMOS process. A channel-erasing scheme has been implemented to realize a cell size of 0.49 μm² , the smallest yet reported for 0.25-μm CMOS technology. A block decoder circuit with a novel erase-reset sequence has been designed for the channel-erasing operation. A bitline direct sensing scheme and a wordline boosted voltage pooling method have been developed to obtain high-speed reading operation at low voltage. An access time of 90 ns at 1.8 V has been realized     

Observation of iron silicide formation by plan-view transmission electron microscopy

The formation and the phase transitions of iron silicide by solid-phase epitaxy have been investigated by means of plan-view transmission electron microscopy, which enables us to observe a clean interface between Fe and Si. Layers of Fe were deposited on Si (100) at room temperature in an ultrahigh vacuum chamber. The sample was annealed in the electron microscope at a temperature between 673 and 1073 K. After annealing at 673 K, FeSi crystallites were formed with various orientations. When the annealing temperature was increased to 973 K, we found that the crystallites suddenly started to coalesce into grains of several hundreds of nanometers in size and polycrystalline beta-FeSi2 was formed. These phase transitions were also confirmed with electron energy-loss spectroscopy.     

The Direct Spectroscopy of Positronium Hyperfine Structure Using a Sub-THz Gyrotron

Positronium is an ideal system for research on Quantum Electrodynamics (QED), especially in a bound state. A discrepancy of 3.9 standard deviations has been found between the measured hyperfine structure (Ps-HFS) and the QED predictions. This may be due to the contribution of unknown new physics or common systematic effects in previous measurements, in all of which the Zeeman effect was used. We propose a new method to directly measure the Ps-HFS using a high power gyrotron. We compare two resonators which have been developed to supply sufficient power to drive the direct transition, a Fabry-Pérot resonator and a ring resonator with a diffraction grating. We plan to perform first direct measurement of Ps-HFS within the next six months.     

Direct Measurement of Positronium HyperFine Structure: ～ A New Horizon of Precision Spectroscopy Using Gyrotrons ～

Positronium is an ideal system for research on QED, especially in a bound state. A discrepancy (3.9σ) is found recently between measured HFS values and the QED prediction (including up-to O(α ³ log α ^− 1), where α is the fine-structure constant.). It might be due to a contribution of unknown new physics or common systematic problems in all the previous measurements. A new method to measure HFS directly is performed using a high power gyrotron. The transition from ortho-positronium to para-positronium has been observed with 5 σ CL, which is the first observation of M1 transition in (sub)Terahertz region. New technologies of high power gyrotrons are developed for precision spectroscopy.     

Interaction of Fragrance Materials With 2-Hydroxypropyl-beta-Cyclodextrin by Static and Dynamic Head-space Methods

The stability constants for the inclusion of fragrance materials with 2-hydroxypropyl-beta-cyclodextrin (2HP-beta-C yD) in aqueous solution have been determined by the static head-space method. The 1:1 stability constants obtained by this method were in reasonable agreement with the corresponding values in the literature. In addition, the release profiles of fragrance materials from 2HP-beta-CyD aqueous solution were investigated using the dynamic head-space method. It was found that the suppression of the fragrance materials release was dependent on their stability constants.