橡胶对HIPS树脂落锤指标的影响

通过对高抗冲聚苯乙烯树脂出现产品落锤指标偏低问题的分析，从橡胶配量及其粒径大小上进行了改进，同时改进了工艺操作，采取了提高反应釜搅拌速度、降低乙苯浓度等措施。结果产品合格率达到９９％以上，优级品率达到９８％以上。     

Effects of the reinforcement and toughening of acrylate resin/CaCO3 nanoparticles on rigid poly(vinyl chloride)

Novel composite particles based on nanoscale calcium carbonate (nano‐CaCO₃) as the core and polyacrylates as the shell were first synthesized by in situ encapsulating emulsion polymerization in the presence of the fresh slush pulp of calcium carbonate (CaCO₃) nanoparticles. Subsequently, these modified nanoparticles were compounded with rigid poly(vinyl chloride) (RPVC) to prepare RPVC/CaCO₃ nanocomposites. At the same time, the effects of the reinforcement and toughening of these modified nanoparticles on RPVC were investigated, and the synergistic effect of modified nanoparticles with chlorinated polyethylene (CPE) was also studied. The results showed that in the presence of nano‐CaCO₃ particles, the in situ emulsion polymerization of acrylates was carried out smoothly, and polyacrylates successfully encapsulated on the surface of nano‐CaCO₃ to prepare the modified nanoparticles, breaking down nano‐CaCO₃ particle agglomerates, improving their dispersion in the matrix, and also increasing the particle–matrix interfacial adhesion. Thus, the effects of the reinforcement and toughening of these modified nanoparticles on RPVC were very significant, and the cooperative effect of the nanoparticles with CPE occurred in the united modification system. Scanning electron microscopy analyses indicated that large‐fiber drawing and network morphologies coexisted in the system of joint modification of nanoparticles with CPE. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 3940–3949, 2007     

十二烷基苯磺酸钠水溶液聚集性质的研究

用滴体积法测出十二烷基苯磺酸钠（ＳＤＢＳ）稀水溶液的表面张力；然后求出其临界胶束浓度（ＣＭＣ）。同时通过溶液的电导率、吸收光谱以及荧光光谱测定求出其ＣＭＣ。这样测出的ＣＭＣ值为１．２～１．６×１０－３ｍｏｌ／Ｌ，与文献值相符。也研究了部分水解的聚丙烯酰胺（ＰＨＰＡＭ）对ＳＤＢＳ聚集性质的影响；发现ＳＤＢＳ的ＣＭＣ值随ＰＨＰＡＭ的加人而减少并且ＰＨＰＡＭ水溶液的粘度随ＳＤＢＳ的存在而急剧降低（类似盐效应）。这些方法与性质对强化采油（ＥＯＲ）是重要的。     

Interbay物料自动搬运系统性能分析

Interbay物料自动搬运系统的运行效率对于晶圆制造系统影响较大,研究Interbay物料自动搬运系统的绩效具有较大的意义[1]。该文以带有捷径的单闭环背脊式布局的物料自动搬运系统为研究对象,通过问题描述,简化、假设将实际问题抽象为导引运输模型。然后,建立数学模型,采用Dijkstra算法确定工件搬运的最短路径。最后,利用Arena仿真软件建立含有导引运输设备的模型,采用控制变量法探究小车数量小车占用轨道的方式、调度规则等因素对于产出的影响,发现对于本文中的模型,其它条件相同时,搬运系统采用Release-at-end的控制方式,系统最大搬运量越大。     

Phase separation in polymer blends comprising copolymers: 6. Effect of molecular architecture of block copolymers

To study the effect of the molecular architecture of a copolymer on its miscibility with corresponding homopolymers a series of block copolymers of styrene and isoprene with diblock, triblock and four-arm star architectures have been prepared and the morphologies of the blends of the copolymers and polyisoprene with different molecular weights have been examined by electron microscopy. The results show that miscibility varies in the sequence diblock>triblock>four-arm star copolymers. This sequence is in the opposite direction to the variation of the architectural complexity of the block copolymers, i.e. the more complex is molecular architecture, the greater is conformation restriction in microdomain formation and the less is solubility of homopolymer in corresponding domains.     

PP/纳米级CaCO_3复合材料的研究

研究了纳米级CaCO3填充粒状、粉状PP复合材料的力学性能,并用SEM观察纳米级碳酸钙在PP中的分散状态及用SALS分析了其结晶行为。结果表明,粉状PP更有利于纳米级碳酸钙在PP中的分散,并具有更好的加工性能、力学性能。同时纳米级碳酸钙改性PP的SALS图像变得弥散、模糊,PP球晶变得不完善,晶粒更小。     

CAN总线在细纱机控制系统中的应用

分析了CAN总线在细纱机控制系统中的可行性,介绍了基于ColdFire MCF52235的细纱机控制系统的构成和PLC编程,并给出了单锭CAN节点的软件设计方案。     

Effect of fretting amplitudes on fretting wear behavior of steel wires in coal mines

Given that fretting wear causes failure in steel wires, we carried out tangential fretting wear tests of steel wires on a self-made fretting wear test rig under contact loads of 9 and 29 N and fretting amplitudes ranging from 5 to 180 μm. We observed morphologies of fretted steel wire surfaces on an S-3000N scanning electron microscope in order to analyze fretting wear mecha-nisms. The results show that the fretting regime of steel wires transforms from partial slip regime into mixed fretting regime and gross slip regime with an increase in fretting amplitudes under a given contact load. In partial slip regime, the friction coefficient has a relatively low value. Four stages can be defined in mixed fretting and gross slip regimes. The fretting wear of steel wires in-creases obviously with increases in fretting amplitudes. Fretting scars present a typical morphology of annularity, showing slight damage in partial slip regime. However, wear clearly increases in mixed fretting regime where wear mechanism is a combination of plastic deformation, abrasive wear and oxidative wear. In gross slip regime, more severe degradation is present than in the other regimes. The main fretting wear mechanisms of steel wires are abrasive wear, surface fatigue and friction oxidation.     

生活质量视阈下的大学生“精神贫困”测量指标研究

高校大学生＂精神贫困＂现象已引起人们重视,成为多方关注话题。本文在梳理前人研究成果基础上,对＂精神贫困＂测量指标进行研究,以获得科学的测量指标体系,为获得真实科学的一手资料打进行理论论证。     

大学教学与科研关系的探讨

大学职能的发展历经了从教学主导到教学科研并举的演变。教学与科研在大学的发展历程和具体运作过程中存在着不可避免的矛盾。二者结合是优化资源配置、发展创新教育的最佳途径,对大学进行有效的分层定位是协调二者关系的关键。具体包括在宏观战略上明确定位,同时加强组织重构、分类管理等。此外,大学文化之于教学与科研和谐也十分重要。