聚乙烯醇改性固体淀粉胶粘剂的研制

介绍新型固体淀粉胶的制备方法。以淀粉为主要原料，经加热催化分步氧化，再加入聚乙烯醇合成树脂改善其性能，然后用硬脂酸钠作为赋型剂。制得的淀粉胶剪切强度比泡花碱高0.01MPa。     

氧化纤维素的制备研究

介绍了氧化纤维素 (DAC)的制备过程 ,用正交法探讨了以NaIO4 作氧化纤维素时反应温度、溶液pH值、氧化剂浓度、反应时间以及交互作用对DAC醛基含量的影响 ,找到了影响醛基含量的主要因素为反应温度、反应温度与NaIO4 的交互作用、反应温度与溶液 pH值的交互作用。初步确定了制备氧化纤维素的反应工艺 ,使醛基含量较高时的最佳反应条件为 :反应温度 3 5℃ ,反应时间 3h ,NaIO4 质量分数 6.78% ,pH值为 2时 ,醛基含量达 68.2 0 %。     

炭黑生产工艺的进展

介绍了较为成熟的炭黑生产工艺,讨论了其各自在工业应用方面的前景,并对近年来涌现出的一些具有可应用前景的工艺方法进行了简要评述,同时也归纳了近几年炭黑生产工艺的进展表现。     

女性护理液抗炎止痒作用的实验研究

女性护理液为中药苦参醇提液加三氯羟基二苯醚复配而成，根据药理方法学以实验动物建立模型，观察护理液的抗炎、止痒作用。结果，单独使用三氯羟基二苯醚，有较好的抗菌消炎作用，但是止痒作用不明显。以苦参醇提液和三氯羟基二苯醚复配，其抗炎、止痒作用均接近地塞米松磷酸钠注射液。     

三种骨灰瓷原料的制备与晶相结构

本实验采用牛、猪、羊三种骨头通过高温煅烧制备骨灰瓷原料。采用XRD和SEM方法表征三种骨灰料的晶相结构和显微结构。实验结果表明 :三种骨灰料经 14 0 0℃煅烧后均存在Ca1 0 (PO4 ) 6(OH) 2 、α -Ca3(PO4 ) 2 种晶相。在 132 0℃煅烧的三种骨灰料中 ,按牛、猪、羊顺序 ,Ca1 0 (PO4 ) 6 (OH) 2 含量分别为 87 2 %、89 1%、71 9% ;β-Ca3(PO4 ) 2 含量最高 ,其可塑性和成瓷性能好 ,从晶相上考虑选择羊骨为较佳的骨灰瓷原料。从白度和透光度上考虑选择牛骨为较佳原料。随着煅烧温度升高 ,三种骨头料的β-Ca3(PO4 ) 2 含量增加 ,羊骨和牛骨中的Ca1 0 (PO4 ) 6 (OH) 2 含量减少 ,而猪骨的Ca1 0(PO4 ) 6 (OH) 2 含量反而增加。因此煅烧温度升高对羊骨和牛骨有利 ,而对猪骨不利     

超分子化学与环糊精

超分子化学是上世纪八十年代末兴起的一门新兴边缘学科,它的发展为各个学科的研究和新技术、新材料的研发开拓了一个崭新的领域。环糊精是超分子化学的重要研究内容之一。本文对环糊精的来源和分子结构特点作了简单介绍,论述了环糊精及其衍生物任超分子化学领域中的地位和作用,显示出超分子化学及环糊精研究和应用的无限潜力。     

Synthesis and properties of new polymerized monomer reactants matrix resins of pyrrolone–benzimidazole copolymers containing pyridine unit

A series of new polymerized monomer reactants (PMR) matrix resins of poly(pyrrolone‐benzimidazole)s containing a pyridine unit (PPBP) were synthesized by polycondensation of monoethyl ester of cis‐5‐norbornene‐endo‐2,3‐dicarboxylic acid, 2,6‐diphenyl ester pyridinedicarboxylic acid or 3,5‐diphenyl ester pyridinedicarboxylic acid, and diethyl ester of 4,4′‐oxydiphthalic acid with 3,3′‐diaminobenzidine in a mixing solution of anhydrous ethyl alcohol and N‐methylpyrrolidone under given temperature and pressure conditions. The resulting resin solutions showed good solubility in polar organic solvents and stability at room temperature. The corresponding PPBP matrix resin, molded powder, and molded plate were prepared by undergoing amidation, imidization, cyclization, and crosslinking reactions when the reaction temperature was increased from 80 to 350°C, successively; the crosslinking structure was formed by the reverse Diels–Alder reaction at 270–290°C under 50 MPa pressure (2.5–3.5 MPa displayed by the pressure meter). The chemical reactions and properties of the resulting PPBP were studied by means of FTIR, TGA, and DMA methods, and the results indicated that the kinds of PPBP materials retain excellent thermal stability and processability; when the initial decomposition temperature was above 620°C the T_g was at 413.5°C for 3,5‐PPBP‐20 molded plate. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91: 3981–3990, 2004     

Rheological properties of bitumen in water emulsions with added solids

Experimental work was carried out to investigate the rheological properties of bitumen in water emulsions containing solids of different shape and size. The bitumen volumetric concentration was varied up to 60%, solids free basis, and the solids volume fraction (total volume basis) was varied up to 0.2. Irregular-shaped silica sand (average diameter: 9 and 33 μm) and smooth spherical glass beads (average diameter: 27 and 44 μm) were used as the added solids. In the low shear stress range, shear thinning behavior was observed for bitumen in water emulsions. At high shear stress, the viscosity of the emulsions became fairly independent of the shear stress. The addition of solids to the bitumen emulsions increased the mixture viscosity. The addition of irregular-shaped silica sand gave a higher viscosity than a similar addition of the spherical glass beads. The viscosity of the emulsion/solids mixtures was influenced by the solids size as well; the smaller size particles gave a higher viscosity. The addition of solids to the bitumen emulsions also induced shear thickening (dilatancy) behavior at high solids volume fraction. The degree of the shear thickening increased with the oil concentration.     

一种不确定图中最可靠最大流问题的解决方案

最可靠最大流是不确定图中可靠性最高的最大流,它是传统最大流问题在不确定图上的自然延伸.现有的最可靠最大流算法SDBA时间复杂性较高,无法满足实际中不同应用的需求,为此,文中提出一种具有普遍适用性的最可靠最大流解决方案.该方案包含面向不同需求的3种算法:基于负权群落消去的NWCE算法、基于时间约束优先单环消去的SPEA-t算法和基于概率阈值约束优先单环消去的SPEA-p算法.其中,NWCE算法借鉴最小费用最大流的"流平移"思想并基于文中提出的负权群落概念,在辅助剩余图中不断地消去可使可靠性增加而流量不变的负权群落,可证当消去所有负权群落时对应的最大流即为最可靠最大流.根据负权群落中由单环组成的群落占很高比例且相对于多环组成的群落更易查找和消去的性质,同时考虑到NWCE算法为了获得最优解,往往为了消去最后少数几个对概率提高贡献很小的负权群落却花费了很长时间的现象,提出SPEA-t和SPEA-p两种快速近似算法,前者是以规定时间内尽可能逼近最优解为目标,后者是以最少时间达到预设的概率阈值为目标,它们都采用了优先消去概率-时间效益较好的单环群落的策略,加快对最优解的逼近速度,减少或放弃时间开销较大的多环群落的消去,以满足那些对算法时间性能要求很高而结果以近似最优即可的应用需求.实验表明,相对于SDBA算法,NWCE算法结合概率剪枝策略在时间性能上有了数量级的提高,而SPEA-t算法和SPEA-p算法则具有更高的性能和更好的适用性.     

双模移动终端主动探测系统的DSP设计与实现

针对移动终端用户身份识别的技术需求,设计了一种基于GSM和CDMA双模制式下基带信号处理的主动探测系统。为了满足主动探测系统的实时处理需求,采用高性能的DSP芯片TMS320C6416作为核心处理器,结合其他器件设计硬件系统,完成基带信号处理板中DSP芯片硬件接口的设计。经现场测试结果验证,系统能够实现对开机状态下GSM和CDMA移动用户身份信息的快速捕获,进而表明本设计可满足系统实时性和可靠性的要求。