A moment method solution for TMz and TEzwaves illuminating two-dimensional objects above a lossy half space

A moment method (MM) solution for analyzing the electromagnetic shielding and scattering properties of two-dimensional (2-D) objects over a lossy half space is presented. The materials of the objects can be metal, dielectric, or magnetic. Also, the lossy half space is included to simulate the effects of the earth ground or any flat homogeneous lossy surface. An MM based on a volume formulation and a special Green's function in the spectral domain is developed. Both TM _z and TE_z waves incident upon 2-D metal or lossy material structures are demonstrated for the shielding effects of those bodies in the presence of the lossy ground. Besides, the echo widths of a composite object either in free space or above the lossy half space are determined by using the MM. Some of the results are compared with those by other methods, and good agreements are obtained. The MM solution can be used to study the shielding and scattering problems for cylindrical structures located over a lossy ground     

Contour integral method for stress intensity factors of interface crack

A general Betti's reciprocal work theorem with interface cracks of a bimaterial is established in this paper, and a path independent contour integral method for the stress intensity factor (SIF) of the interface crack was obtained. When the stress and displacement fields in a specimen are calculated by the finite element method, the SIF K _I and K _II of interface cracks can be obtained immediately by a contour integral. Some solutions of interesting examples, such as two collinear interface cracks, are also given.Presented at the Far East Fracture Group (FEFG) International Symposium on Fracture and Strength of Solids, 4–7 July 1994 in Xi'an China.     

微型集散系统通用过程控制软件包

本文给出一种新的基于ＭＣＳ－５１单片机集散系统通用过程控制软件包的设计原理及其实施方法。文中重点地阐述了微型集散系统的构在民，通用过程控制软件的自动生成，主要数据结构与程序结构，实现方法及关键技术等。本软件包是采用ＴＵＲＢＯＣ２．０版本和ＭＣＳ－５１泄编语言编程的，并通过了ＭＣＳ－５１组合软件的编译，形成了可用的目标码程序系统。     

条形药包药量计算公式探讨

本文通过现有诸药量计算公式的总结和统计分析，认为经验函数划（ｎ）以二次式较合适。并根据流体动力学理论和临界能量密度破碎准则，推导出ｆ（ｎ）的二次项公式，得ｑ＝ＫＷ２（１十ｎ２）／２；该式较符合实际，故推荐供参考。     

与性能相关的容错计算系统可靠性指标

对于某些容错计算系统，由于成功与故障之间没有明确的界限，用传统的可靠性指标难以准确地评价其容错性能，为此一些学者提出了若干与性能相关的可靠性指标。本文将这些指标概括成三类（即基于瞬时性能的指标、基于累积收益的指标和率模可靠性指标）加以介绍，并简要介绍了它们的求解方法。     

程控交换机集中维护管理系统的设计与实现

本文从工程设计角度描述了程控交换机集中维护管理系统的硬件构成、软件功能，对于同类系统的设计和实现具有一定的参考价值。     

Reliability-estimation and stopping-rules for software testing,based on repeated appearances of bugs

Software-testing (debugging) is one of the most important components in software development. An important question in the debugging process is, when to stop. The choice is usually based on one of two decision criteria: (1) when the reliability has reached a given threshold, and (2) when the gain in reliability cannot justify the testing cost. Various stopping rules and software reliability models are compared by their ability to deal with these two criteria. Two new stopping rules, initiated by theoretical study of the optimal stopping rule based on cost, are more stable than other rules for a large variety of bug structures. The 1-step-ahead stopping rules based on the Musa et. al. basic execution and logarithmic Poisson models, as well as the stopping rule by Dalal and Mallows (1990), work well for software with many relatively small bugs (bugs with very low occurrence rates). The comparison was done by simulation     

制备2，4－二氯－5－氟苯甲酰乙酸甲酯的缩合剂及工艺研究

通过３种不同的碱来制备２，４－二氯－５－氟苯甲酰乙酸甲酯，优选得到了其最佳缩合剂甲醇钠；同时应用正交设计实验，研究了原料配比、反应时间、反应温度对收率的影响，在优选条件下收率为７８．５％。