低浓度的阴离子洗涤剂实验室内的质量控制

在环境监测中低浓度的阴离子洗涤剂实验室内质量控制应采取以下措施：空白试验值测定，检出限的确定，空白试验的质量控制图，校准曲线的检验，标准样品的测定。     

Effect of preparation conditions on the properties of a coal-derived activated carbon honeycomb monolith

Activated carbon honeycomb (ACH) monoliths were prepared by extruding of a mixture of bituminous coal and organic additives and subsequent carbonization and steam activation. Preparation parameters that were varied were carbonization temperature and activation time. The carbonization conditions were 500, 650 and 800 °C for 1 h and the steam activation conditions were 850 °C for 2, 4 and 6 h. The monoliths at various states were characterized by SEM, XRD, nitrogen adsorption and compression test. It was found that carbonization temperature has significant effects on pore size distribution and mechanical strength of ACH monoliths. The ACH monoliths prepared from high carbonization temperatures exhibited lower values of the BET surface area and total pore volume and higher value of the mechanical strength than those of the ACH monoliths prepared from low carbonization temperatures. This was attributed to the effect of high temperature carbonization that results in the formation of relatively less defective structures.     

磷钨钼杂多酸掺杂聚苯胺催化合成丁醛乙二醇缩醛

报道了以磷钨钼杂多酸掺杂聚苯胺为催化剂,通过丁醛和乙二醇反应合成了丁醛乙二醇缩醛。系统考察了醛醇物质的量比、催化剂用量以及反应时间诸因素对产品收率的影响。确定适宜的工艺条件为n(丁醛)∶n(乙二醇)=1∶1.5,催化剂的质量为反应物料总质量的0.8%,反应时间1.0 h。在此反应条件下,丁醛乙二醇缩醛的收率可达71.1%。     

CO还原液态铁氧化物的动力学研究

在1678K的温度下测定了用CO或CO与Ar的混合气体还原浮士体的反应速度浮士体放在纯铁坩埚中，还原速度是根据红外CO2气体分析仪所测出的CO2生成量来求出的．实验表明表现还原速度正比于气体中CO分压，并与气体流量的1．59次方有关，反应的前或其速度是由气相的传质速度所控制，化学反应的速度常数最小为60（g／atm·min·cm2）．     

扇形浇口热流道注射成型PP方椅背靠

介绍了PP方椅背靠的形状，研究了扇形浇口热流道注射成型PP方椅背靠的模具结构及运行特征，分析了扇形浇口的设计。根据物料的性能特点，重点分析了模温系统的温控条件以及注射工艺条件对制品的影响。结果表明，按照提供的工艺条件进行调试，所生产的制品无任何流痕，飞边等其他缺陷，效果较为理想。     

HEAT TRANSFER IN PARTIALLY MISCIBLE TERNARY SYSTEMS

In the study of mass transfer between partially miscible liquids, temperature perturbations have been found to have an important effect in the generation of interfacial activity. Micro- and macro-generated interfacial convection usually occurs in combination with one another even in fairly simple heat or mass transfer events. These combinations are responsible for the enhancement of mass transfer rates. In an effort to acquire a better understanding of the heat transfer effects in ternary liquid-liquid systems, temperature difference profiles were measured when contacting two partially miscible phases. A vertical and a rotational transfer cell were designed to contact the partially miscible phases without inducing external disturbances. Five thermocouples were immersed in the bottom liquid phase at predetermined positions below the interface. In order to understand the influence of the convection generated, the vertical cell was designed to hinder convection in one phase, while the rotational cell permits convection in both phases. The experimental results showed larger temperature differences in the rotational cell after the contact of the phases. Also, systems which were initially unsaturated presented larger heat effects than those in which the partially miscible solvents were initially saturated. Several parameters indicating the importance of heat effects in the ternary systems studied are reported.     

聚砜酰胺的分子量对其超滤膜性能的影响——Ⅲ.热性能

对不同分子量的PSA 材料和由其制成的超滤膜的TGA、DSC 及FTIR 研究表明,PSA 会以氢键的形式吸附水份,被吸附的水份主要以单分子形式存在,双聚或多聚的也有,但较少;并且在温度升到40℃左右将全部游离出来,在120℃左右则全部气化离开PSA。PSA 材料在400℃以上才开始分解,其耐热性能随分子量的增大而降低。凝胶浴不同对PSA 膜的晶态影响不大。     

燕化200kt/a气相法聚丙烯装置技术改造设计

从设计角度对燕化200kt/a气相法聚丙烯装置的技术改造进行了详细分析和说明。装置改造获得了最大的经济效益，为国内同类装置进行技术改造提供了经验。     

Co－Mo／MgO－Al_2O_3一氧化碳耐硫变换催化剂失活原因的探讨

采用程序升温硫化（ＴＰＳ）技术，微反—色谱法（ＭＲＣ）、扫描电镜、透射电镜和其它分析测试手段，对工业应用前后的Ｃｏ－Ｍｏ系耐硫变换催化剂Ｋ８－１１进行了分析，从而对其失活原因进行了分析和讨论