复合沉淀氯化镨钕工艺研究

针对草酸沉淀成本高的问题，提出了复合沉淀的方法，试验结果及生产应用都证明了此方法能达到降耗同效的目的。     

一种有机硫类絮凝剂DTC的合成及性能评价

讨论了由有机伯胺或仲胺和CS2合成二硫代氨基甲酸盐DTC的反应及副反应,简介了合成工艺。根据红外光谱确认了由三乙烯四胺合成的二硫代氨基甲酸盐（以下简称DTC）的结构。以含原油350 mg/L、含悬浮固体55.1 mg/L,含Fe^2＋10.0 mg/L的模拟污水为实验水样,考察了该DTC的絮凝性能,在40℃、pH=6-7、沉降时间30分钟条件下DTC的适宜加量为20 mg/L,此时污水含油量为9.0 mg/L;使用DTC的适宜pH范围在4-8,pH=6为最佳值,适宜温度范围为10-45℃,温度高于45℃时DTC可发生热分解;DTC的除油效果随污水中Fe^2＋浓度增大而改善。在含油89.1 mg/L、含悬浮固体55.1 mg/L、含Fe^2＋13.2 mg/L的油田污水中,DTC的除油率最高,远高于常用絮凝剂PFS,PAC,CPAM,HPAM和PAM。当污水中不含Fe^2＋时,DTC无絮凝除油效果。讨论了DTC在Fe^2＋参与下的絮凝过程。图5表1参8。     

Synthesis and Characterization of Nanosized ZSM-5 Zeolite with Mesoporous Carbon Nanotube as Templates

Preparation of nanocrystalline ZSM-5 has been proven possible with carbon matrix by using confined space synthesis. In combination with the hydrothermal method, by the use of a mesoporous carbon nanotube as the inert support material, ZSM-5 with SiO₂/Al₂O₃ ratios of 100 was successfully synthesized with an average crystal size of 27 nm. Their structures were preliminarily characterized by x-ray power diffraction (XRPD) and infrared spectroscopy (IR), and scanning electron microscopy (SEM), respectively. At the same time, we put forward the mechanism about the confined space synthesis in terms of the results.     

Microwave Demulsification in Removing Naphthenic Acids from Diesel Oil

Emulsification is an undesired phenomenon in the refining of highly acidic oil by alkali-washing electro-refining. In this article, a novel microwave method is applied for demulsification in the removing of naphthenic acid from diesel oil. The internal heating is attributed to molecular rotation and ionic conduction. The decrease of interface zeta-potential and the viscosity of diesel oil are responsible for the demulsification with microwave irradiation. The results exhibited that the demulsification rate is maximized when the optimum microwave irradiation power, exposure time, and irradiation pressure for Anshan and Liaohe diesel oil are deemed to be 375 W, 5/6 min and 0.05 MPa, respectively.     

TBM地区低孔渗高产气储层预测

 本文从TBM地区目的层的地质和地球物理特征分析出发，以三维地震资料为基础，综合利用人工和神经网络波形分类等定性储层预测方法和利用反演及敏感地震属性分析，对TBM地区低孔渗砂岩分布区开展了砂体展布特征分析和天然气高产区预测研究。根据研究结果部署了10口钻井，已完钻的4口井中有3口获得高产气流（其中DK27井日产天然气36.8×10⁴m³）。值得指出的是，目前所用的预测方法还不能预测厚度小于6m的单砂层或砂层组构成的储层。     

改进的第三代相干算法及应用

在讨论相干技术发展及三代相干算法优缺点的基础上，介绍了改进的第三代相干算法。应用自行开发的相干软件对多个油气勘探和开发区块的三维地震资料进行处理、分析，对相干时窗长度、相关道数等参数对算法效果的影响及相干体对断层、异常地质体的识别，以及解释方法进行了探讨。应用实例证明，改进的第三代相干算法抗干扰能力强，横向分辨率高，不仅适用于倾斜地层，而且对断层尤其对小断层、异常地质体具有较高的检测能力，是油气勘探和开发的一项有效和实用的技术。     

基于MSP430F147的网络化通风机监测仪的设计与实现

针对煤矿安全生产中的具体要求,以MSP430高性能单片机为核心,采用网络化通信技术对通风机的电气性能和机械性能进行监测.     

Interweaving genetic programming and genetic algorithm for structural and parametric optimization in adaptive platform product customization

An adaptive product platform offers high customizability for generating feasible product variants for customer requirements. Customization takes place not only to product platform structure but also to its relevant parameters. Structural and parametric optimization processes are interwoven with each other to achieve the total optimality. This paper presents an evolutionary method dealing with interwoven structural and parametric optimization of adaptive platform product customization. The method combines genetic programming and genetic algorithm for handling structural and parametric optimization, respectively. Efficient genetic representation and operation schemes are carefully adapted. While designing these schemes, features specific to structural and parameter customization are considered for the simplification of platform product management. The experimental results show that the performance of the proposed algorithm outperforms that of the tandem evolutionary algorithm in which a genetic algorithm for parametric optimization is totally nested in a genetic programming for structural optimization.     

电炉钢外来夹杂控制的研究

介绍了夹杂物的来源,包括内生夹杂和外来夹杂,着重于二次氧化产物、卷渣、内衬侵蚀.同时介绍了鄂钢电炉厂在冶炼和连铸过程中控制夹杂物的操作实践.     

Sediment chemistry and nutrient influx in a hydrologically restored bottomland hardwood forest in Midwestern USA

Exchanges of total N and C between a river and its floodplain forest have been enhanced by sedimentation processes during flood pulses at a 5‐ha bottomland hardwood forest located at the Olentangy River Wetland Research Park in central Ohio. In the spring of 2000, the forest was hydrologically restored by notching an artificial levee that had separated the Olentangy River and its floodplain forest for 100 years. One‐hundred flat sediment traps (30 cm × 30 cm) were used to collect sediment samples during spring/summer flooding events from 2003 to 2005. Results showed that sediment deposition is determined by the landscape variability during flooding events, Net sediment deposit in the wettest area averaged 134 ± 12 g‐dry wt m^?2 in 2003, 127 ± 17 g‐dry wt m^?2 in 2004 and 149 ± 23 g‐dry wt m^?2 in 2005. Total N and C sedimentation ranged from 0.49 to 0.92 g‐N m^?2 and 5.2 to 19.9 g‐C m^?2. Fe dominates the sediment chemistry and results show the elemental abundance in the order of Al > Fe > Ca > K > Mg > S > P > Na > Mn > Zn > B > Cu > Mo. A hydrologic pulsing index (HPI) could be used as an indicator for mass changes of energies with hydrologic pulsing events. Restoration of seasonally flooded bottomland forests could stimulate potentially large nutrient and Fe releases, which would eventually lead to an enhanced forest productivity and biodiversity. Copyright © 2007 John Wiley & Sons, Ltd.