蓄冰空调制冷新技术

文章叙述了中央人民广播电台新业务楼空调工程中采用蓄冰空调制冷新技术的情况。文章讲解了蓄冰空调原理，并对蓄冰制冷与常规制冷技术进行比较，指出：从节电上来考虑，前者具有经济性。文章最后列举了今后在设计和维护上，还有待解决的一些问题。     

A unified model for dislocation nucleation, dislocation emission and dislocation free zone

In this paper, a unified model for dislocation nucleation, emission and dislocation free zone is proposed based on the Peierls framework. Three regions are identified ahead of the crack tip. The emitted dislocations, located away from the crack tip in the form of an inverse pileup, define the plastic zone. Between that zone and the cohesive zone immediately ahead of the crack tip, there is a dislocation free zone. With the stress field and the dislocation density field in the cohesive zone and plastic zone being, respectively, expressed in the first and second Chebyshev polynomial series, and the opening and slip displacements in trigonometric series, a set of nonlinear algebraic equations can be obtained and solved with the Newton-Raphson Method. The results of calculations for pure shearing and combined tension and shear loading after dislocation emission are given in detail. An approximate treatment of the dynamic effects of the dislocation emission is also developed in this paper, and the calculation results are in good agreement with those of molecular dynamics simulations.Presented at the Far East Fracture Group (FEFG) International Symposium on Fracture and Strength of Solids, 4–7 July 1994 in Xi'an, China.     

基于Patel-Teja状态方程的统一粘度模型(Ⅱ)应用于油气藏流体粘度的预测

基于(I)报根据pVT和Tμp图形的相似性和Patel-Teja状态方程建立的预测纯流体气、液相粘度的统一模型,通过引入常规的状态方程参数的混合规则,将其应用于二元轻烃混合物共计1894个数据点及模拟天然气高压粘度的预测,平均相对误差分别为13.78%和16.75%;应用于油藏原油和天然气高压粘度的预测,结果优于现有的有关油气藏流体粘度模型.     

多级脉冲深穿透射孔技术

目前国内较先进的射孔工艺是增效射孔和三相流射孔,这2种射孔工艺均存在射孔深度和造缝深度浅的问题,尤其是对低渗油藏和纵向渗透率远大于横向渗透率的油藏,此造缝深度并不能满足油田生产的需要.介绍了一种新型的射孔技术,它是一种能进行深度射孔造缝的多级射孔技术,利用三级推进剂燃爆时产生峰值不连续的高温、高压气流,形成多级脉冲,多次冲击射孔孔眼前沿的裂缝,使其有效延伸至地层深处,从而较单独的射孔更能有效地增加油气产量.通过地面水泥靶的试验,证明了该射孔器的延缝功能和安全性;通过塘32等井的现场试验,证明该射孔技术对污染地层解堵有显著效果,可明显地降低地层破裂压力.     

粉末涂层抗冲击缺陷分析

讨论了粉末静电涂装中出现的涂层抗冲击试验缺陷，通过设计实验寻找造成该缺陷的原因，揭示了产生涂层起皱和脱离基材的原因是钢板与磷化液之间的匹配性差。通过提高磷化液的游离酸酸度解决了该问题。从理论上推出了游离酸与附着力之间可能的关系：游离酸影响磷化膜与基材的结合力，或影响形成的磷化膜的形态。     

发展数字印刷 打造上海整体印刷业繁荣

在2005年初上海轻印刷行业协会（以下简称上海轻印协）四届四次常务理事会上，许多常务理事提议协会要制订一个轻印刷行业未来5年（2006～20l0年）规划并形成决议。协会会长何其同志根据协会决议责成协会秘书班子指定专人负责此项工作。整个规划于2005年9月29日协会四届五次常务理事会审议通过并定为《上海市轻印刷企业2006～20l0年发展指导意见》、《上海市数字印刷企业2006～2010年发展指导意见》的两个文件。     

Google Erath在石油勘探中的应用

从网上下载的Google Earth卫星遥感照片更接近实际地形，在石油勘探初期，经常用它对工区进行踏勘和施工设计。文中详细地介绍了利用Google Earth进行施工设计的方法和步骤。     

辽河油田小龙湾地区粗面岩油藏岩石力学特性研究

粗面岩油藏是一种特殊油气藏，已受到国内外油田的广泛关注，但目前国内对粗面岩力学特性的研究还很少。分析了粗面岩的岩性和裂缝发育情况，以岩石力学和弹性力学为理论基础，从岩石的应力-应变曲线和试验的基本原理出发，结合辽河油田小龙湾地区现场实际，通过粗面岩岩心单轴试验，得到了粗面岩的抗压强度、弹性模量、泊松比和抗拉强度等基本岩石力学参数。根据试验得到的应力-应变曲线，结合弹性力学相关理论，得出小龙湾地区粗面岩的力学特性为线弹性，并给出了其基本力学参数的取值范围。谊结果对辽河油田小龙湾地区粗面岩油气藏的压裂设计和油气田开发具有重要的指导意义和参考价值。     

Numerical simulation of two-phase turbulent flow in hydraulic and hydropower engineering

In connection with the specific features of high velocity aerated flow generated by hydraulic engineering structures, the mathematical model is developed for high turbulence air-water two-phase flow with the use of twin flow theoretical model in this paper. Furthermore the numerical method is proposed to treat bubbled flows. In addition, on the basis of air-water stratified twin flow model, the new calculation methods and free surface tracking technique are proposed to describe complicated movements of the free surface. Finally, the proposed model is used to calculate artificial aerated flows. The computed results coincide quite well with experimental results. This means that the proposed method can provide solid basis for practical engineering design.     

奥钢联板坯连铸计算机系统升级研究

某钢厂板坯连铸过程控制系统采用的奥钢联(VAI)技术,运行数年来,由于模型不透明,维护和调整困难,迫切需要升级改造。改造后的计算机系统充分考虑现有资源和需求,能够达到升级改造的目的。