纳米β-NiOOH的固相合成及其性能

首次利用固相氧化法制备了 β NiOOH纳米粉体样品 ,经X射线衍射和透射电镜测试结果表明所得样品 β NiOOH粒子呈球形 ,粒径大小在 2 0～ 40nm之间。热重与差热分析结果表明当温度超过 10 0℃ ,样品开始不可逆地分解为NiO。运用恒流充放电、循环伏安以及Tafel极化等电化学测试对样品的电化学性能进行了初步研究。结果表明 :β NiOOH的交换电流密度高于 β Ni(OH) 2 的交换电流密度约一个数量级 ,具有较好的电极可逆性、较高的质量比容量以及优良的容量保持率 ,适于作为Zn/NiOOH类型镍电池的正极活性材料     

熔融-固相缩聚法中固相聚合对聚乳酸合成的影响

以L 乳酸单体为原料 ,熔融 -固相缩聚法合成了聚乳酸 ,重点研究了固相聚合的工艺条件。结果表明 ,绝对压力 60Pa ,氯化亚锡为催化剂 ,分段控温 ,可使聚乳酸的粘均分子量提高到固相聚合反应前的 5 3倍。通过对固相聚合产物的结晶度和熔点的分析 ,探讨了固相聚合的机理。     

Single-longitudinal-mode fiber ring laser employing an equivalent phase-shifted fiber Bragg grating

A novel single-longitudinal-mode (SLM) fiber ring laser that incorporates an equivalent phase-shifted fiber Bragg grating acting as an ultra-narrow bandpass filter in the laser cavity is proposed. The equivalent phase-shifted fiber Bragg grating has an ultra-narrow transmission bandwidth which ensures an SLM lasing. Stable SLM operation without mode hopping is demonstrated.     

Cooling and Solidification of Melted Drops in an Immiscible Cooling Medium

The cooling and solidification of melted drops during their movement in an immiscible cooling medium is widely employed for granulation in the chemical industry, and a study of these processes to provides a basis for the design of the granulation tower height and the temperature of the cooling medium is reported. A physical model of the cooling and solidification of the drop is established and the numerical calculation is performed. The influences of the key factors in the solidification, i.e., Bi number, drop diameter, temperature of the cooling medium, etc. are presented. The cooling and solidification during wax granulation in a water‐cooling tower and during urea granulation in an air‐cooling tower (spraying tower) are described in detail. Characteristics of the solidification and temperature distribution within the particle at different times are shown. The model and calculations can be used for structure design of the granulation tower and optimization of the operation parameters.     

常用小水电工程地面控制测量方法

测量工作在小水电工程建设中起着重要的作用。小水电工程按其布置的方式分为堤坝式、引水式和混合式三种。堤坝式电站的测量工作比较简单,而引水式和混合式电站是高水头式,这类电站传统的地面控制测量方法是建立小三角网,但目前由于GPS和全站仪的全面普及,传统的小三角网控制已完全被GPS测量或与EDM导线结合的方法所代替。文章着重介绍引水式或混合式高水头小水电工程的地面控制测量。     

基于PNX1300系列多媒体处理器的MPEG-4视频压缩卡设计

介绍了一种基于MPEG—4视频压缩标准和PNX1300系列多媒体处理器的MPEG—4视频压缩卡的设计方案，给出了该视频压缩卡的硬件结构框图，详细分析了其软件编码器的设计流程。     

DSP技术在声强测试系统中的应用

根据声强测试过程中对数据处理系统的需求,提出了以数字信号处理器(DSP)TMS320C5409与A/D转换器芯片MAX125为核心构建高速多通道声强数据采集处理系统的方案,并结合它们的特点对该方案进行了论证.同时,详细介绍了TMS320C5409与MAX125之间的硬件接口电路的设计和软件编程的方法.实验表明,该数据采集处理系统具有速度快、可靠性高、结构简单等特点,满足声强测试过程的技术要求.     

基于μCLinux的NAT设备的设计与开发

NAT(网络地址翻译)技术有效地解决了IP地址紧缺的问题,为实现IPv4到IPv6的平滑过渡发挥了巨大的作用.在一个体积小、重量轻、价格低廉的嵌入式平台上实现NAT设备具有很好的实际意义.文中介绍了NAT技术的原理和实现过程,在自行设计的ARM7嵌入式硬件平台上基于μCLinux操作系统实现了NAT的功能,并通过实现其他相关功能,构建了完整的NAT设备,完成了小型网络接入Internet的方案.     

Time dependent crystal-smectic transformation in perylene-containing polyimides

The crystalline conformations of perylene polyimides (PPIs), with alkyl spacers varying in length from C₃ to C₁₂ are discussed. Although modeling of single chains would suggest the possibility that those with odd number of CH₂ groups adopt a flat helical shape, X-ray diffraction suggests that the chains with odd and even spacers have the same conformation, due to the necessity to pack the perylene units. Upon annealing, the UV-vis absorption maximum red-shifts by about 10 nm, indicating enhanced π-stacking between the perylenes. Several changes in the spectra are seen with an increase in annealing time, at a given temperature. With an increase in annealing time, X-ray diffraction patterns show changes in the number of reflections, indicative of a crystal to mesogenic transition. The time required for this transition increases with a decrease in the spacer length, and annealing temperature, suggesting that the dynamics of this transition is very slow.