A study on the preparation of supported metal oxide catalysts using JRC-reference catalysts. I. Preparation of a molybdena–alumina catalyst. Part 4. Preparation parameters and impact index

The effects of the volume and pH of the impregnation solution and of the calcination conditions were examined on the physicochemical and catalytic properties of a 13 wt% MoO₃/Al₂O₃ extrudate catalyst. The Al₂O₃ support and drying procedures (static conditions without flowing air) were fixed in the preparations. In the present series of catalysts, the amount of crystalline MoO₃ was marginally small. It was found that the dispersion of Mo oxide species increased as the volume of the impregnation solution increased, gradually approaching a maximum value. The increase in pH (2–8) of the impregnation solution was found to reduce the dispersion of Mo oxide species. The Mo dispersion increased slightly for the impregnation catalysts as the calcination temperature increased (673–873 K), whereas it decreased for the equilibrium adsorption catalysts. The effects of the calcination atmosphere (with or without flowing air, or with flowing humid air) were very small on the dispersion of Mo oxide species under the present preparation conditions. On the other hand, the methanol oxidation activity of MoO₃/Al₂O₃ was sensitive to the preparation parameters examined here. It was demonstrated by means of EPMA and XPS that a considerable migration of Mo took place during the calcination.

In the present study on the preparation of a 13 wt% MoO₃/Al₂O₃ catalyst, an impact index is proposed to measure the magnitude of the effects of the respective parameter(s) on the physicochemical and catalytic properties. With the Mo dispersion, the effects of the preparation parameter decreased in the order, surface area of the support >> drying process > volume of the impregnation solution > pH, calcination temperature and atmosphere. The size of the impact index for the dispersion of Mo sulfide species is 70–75% of that for the Mo oxide species. The HDS activity of the catalyst was less affected by the preparation parameters than the Mo sulfide dispersion. The preparation parameters affected the segregation of Mo on the outer surface of extrudates in a decreasing order: drying process > volume of the impregnation solution > pH, calcination conditions. It was found that the oxidation of methanol was affected most intensely by the drying procedures. The volume of the impregnation solution, calcination conditions and pH of the impregnation solution also strongly affected the oxidation activity. The impact index suggests that the sensitivity to the preparation variables of the physicochemical and catalytic properties of MoO₃/Al₂O₃ decreases in the order, methanol oxidation activity > surface Mo segregation > Mo oxide dispersion > Mo sulfide dispersion > HDS activity.     

Numerical prediction of fraction of eutectic phase in Sn−Ag−Cu soldring using the phase-field method

A combination of macroscale solidification simulation and phase-field calculation is employed to predict the volume fraction of the eutectic phase in Sn-4.0 mass% Ag-XCu solder alloys (X=0.5–1.1 mass%). The solidification simulation incorporates the cooling rate in the phase-field simulation. We assume the residual liquid solidifies as eutectic phase when the driving force for the nucleation of Cu₆Sn₅ amounts to a critical value, which is determined based on the experimental data. Though the calculation results depend on the experimental data, the obtained fractions are about 40% for 0.5 mass% Cu and more than 90% for 1.1 mass% Cu alloy, which shows good agreement with the experimental data.     

Ipidacrine (NIK-247), a novel antidementia, rapidly enters the brain and improves scopolamine-induced amnesia in rats during the Morris water maze task

The effects of single and repeated administrations of ipidacrine (NIK-247, 9-amino-2, 3, 5, 6, 7, 8-hexahydro-1H-cyclopenta [b] quinoline monohydrochloride monohydrate) on scopolamine-induced spatial learning deficit were investigated in rats using the Morris water maze task. A single oral administration of ipidacrine (0.3 and 1 mg/kg) reduced the increased total latency induced by scopolamine in this task. The repeated administration of ipidacrine (1 mg/kg) of once a day for 5 successive days reduced the increased total latency induced by scopolamine to the levels of the saline-treated control rats in this task. In this pharmaco-kinetic study, ipidacrine was rapidly taken up into the brain within 5 min. Moreover, higher drug levels were observed mainly in the cortex and hippocampus, which both play important roles in learning and memory. Thus, a previous study together with this investigation indicate that ipidacrine improves amnesia which consists of the impairment of the working and reference memory in various animal models, suggesting that ipidacrine is a useful candidate for the therapy of patients with Alzheimer's disease.     

Correlation in Staphylococcus aureus infections between toxic shock syndrome toxin-1 production and clinical feature

Catastrophic stress induced by Hanshin-Awaji earthquake seems to promote rheological deterioration associated with high blood pressure, increased blood viscosity due to hemoconcentration and increased fibrinogen level. These changes lead to prolonged endothelial cell dysfunction demonstrating high levels of von Willebrand factor, tissue type plasminogen activator and plasmin.alpha 2 plasmin inhibitor complex, and accelerate fibrin turnover as the result of a high D-dimer level from the post earthquake period until 4-6 months later. There were remarkable changes in biochemical parameters except for uric acid, BUN, triglyceride level. An increase in these acute changes caused by mental and physical stress might trigger obstructive thrombus in coronary arteries in the elderly after an earthquake. In conclusion, earthquake induced stress could be considered a transient cardiovascular risk factor.     

Aging behavior and surge endurance of 870-900 nm AlGaAs lasers with nonabsorbing mirrors

The reliability of 870-900 nm AlGaAs TJS lasers has been investigated. An emission wavelength longer than 870 nm is realized by utilizing the band tailing effect due to heavy Zn-diffusion in the active region. A nonabsorbing mirror structure is employed to eliminate both gradual degradation and catastrophic damage of the facets. Stable continuous operation for over 10 000 hours has been confirmed at ambient temperatures higher than 50°C and output powers more than 5 mW/ facet. MTTF longer than 10⁵hours is expected for screened devices. Surge endurance has been improved to be nearly one order of magnitude higher than that for a conventional structure.     

Efficacy of early plasmapheresis in Bickerstaff's encephalitis

Double filtration plasmapheresis (DFPP) was performed in a patient with Bickerstaff's brainstem encephalitis (BBE) in its early phase. He was a 27-year-old male patient suffering from diplopia, facial palsy and drowsiness following upper respiratory tract infection, and had high titers of immunoglobulin G (IgG) antibodies against ganglioside NeuAc(alpha)2-8NeuAc(alpha)2-3Gal(beta)1-3GalNAc(beta)1-4(NeuAc(al pha)2-8NeuAc(alpha)2-3)Gal(beta)1-4Glc(beta)1-1'Cer (GQ1b) in the serum. DFPP effected immediate improvement of his drowsiness, supporting the diagnosis of BBE. Our observations suggest that DFPP during the early phase of BBE efficiently prevents the progression of consciousness disturbances.     

Velocity, electromechanical coupling factor and acoustic loss of surface shear waves propagating along x-axis on rotated Y-cut plates of LiNbO3

Velocity and propagation loss of surface shear waves are measured on free-space and metallised surfaces of LiNbO3 crystals along the x-axis of rotated Y-cut plates as a function of rotation about the x-axis between 35° and 70°. The coupling factor obtained from the velocities is 0.20 for a 35° rotated Y-cut plate and 0.09 for a 70° plate. The coupling factor changes linearly with the rotation angle. The propagation losses over the whole range measured here are less than 5 dB/cm on both free-space and on metallised surfaces. These losses are fairly low and very favourable for fabricating s.a.w. filters.     

Solid-state microwave relay systems in Japan

In response to the rapidly increasing demand for communication facilities, microwave relay systems have played an important role in Japan's telecommunications network because of their economy and capability for broadband transmission. Their progress has been marked during the past 20 years and this development has been supported by advances in such diverse fields as radio propagation, antennas, microwave and electronic circuitry, electron devices, and, particularly, in solid-state techniques. This article reviews the history of microwave relay systems and describes the past and expected future contributions of the solid-state technology to these systems.