The paper presents a robot system design with highly reusable components for a component-based robot system for manipulation
tasks. The robot system is designed based on the analysis of manipulation tasks using a unified modeling language use case
diagram. For a service robot with locomotion and manipulation mechanisms, reusability of robot system components is improved
by adopting the proposed design. Our structure consists of scenario, task, robot information management server, data analyzer,
sensor hardware controller, skill, and motion hardware controller on a component-based robot system. Based on the proposed
robot system, we implemented a component-based robot system and subsequently realized a grasping motion by a service robot. 相似文献
The existence of an item pool can bring out the various merits of using item response theory (IRT). This study considered the case where the development of an item pool is in progress. We examined the robustness of four calibration methods in three linking designs using simulated data. The data were generated assuming that a small-sized item pool had already been developed and new items were to be added to that item pool. The results suggested that the item characteristic curve method generally performed well. The performance of the fixed common item parameter calibration method and the concurrent calibration method worsened in one of the linking designs where the number of common items was small. The results also suggested that performance was better when the sample size per form and the number of common items were large.
The speckle interferometer based on multi-camera technology using two cameras is applied to a dynamic deformation measurement of the package of an electronic device. To perform high precise measurement by this method, the optimum conditions for measurements are discussed concerning the size of speckle and the frequency of carrier signals. Under the optimum conditions, the deformation process of the package during the operation of an operational amplifier is measured. Then, the local maximum deformation can be estimated as 150 nm from experimental results. From the results, it can be also confirmed that electronic devices are deformed by the stress of a heat by an operation every second during the operating time. 相似文献
Supporting both WCDMA with HSDPA and GSM/GPRS/EDGE, the 9.3 times 9.3 mm2 SoC fabricated in triple-Vth 65 nm CMOS, has three CPU cores and 20 separate power domains. Unused power domains can be powered down to reduce the leakage power. Partial clock activation scheme especially focused on music playback scene dynamically stops a PLL and clock trees when not necessary and reduces power consumption from 33.6 mW to 19.6 mW. IP-MMU translates virtual address to physical address for 18 hardware-IPs and virtual address space can be allocated when necessary and can be freed after its operation, reducing external memory by 43 MB. Video performance of D1 (720 times 520) size with 30 frames per second for MPEG/AVC decoding and encoding can be achieved under mixed virtual and physical address usage. 相似文献
A new GTO current source inverter in which two auxiliary GTO's are added to the basic inverter circuit, which consists of six GTO's and three capacitors, is presented. One of the auxiliary GTO's is connected between the positive line of the inverter and the neutral of three Y-connected capacitors; another is connected between the negative line and the neutral. In the proposed inverter, the charges of three capacitors are controlled at the same time by means of pulsewidth modulation (PWM) to main GTO's and auxiliary GTO's. This inverter can supply both the sinusoidal current and voltage to the motor. The PWM control technique, the operating principle, and the experimental results for 2.2-kW induction motor drives are described. The output current waveform of this inverter is closely sinusoidal, as opposed to trapezoidal in the basic inverter circuit. The steady-state characteristics of the GTO-CSI induction motor drive system are analyzed by the state-variable methods, and a close agreement between the analyzed and the experimental results is obtained. Smooth and noiseless drive of induction motor over a wide range of speed is observed. 相似文献
In order to evaluate the relationship between nasal carriers of S. aureus and their history of allergic diseases, the total serum IgE titer, the hemogramme pattern, and the titers of specific IgE antibody to Staphylococcal enterotoxins A and B (SEA and SEB) and of specific IgG antibody to SEB were investigated in 98 trade school students. Fifteen (15.3%) of the 98 students were sensitized to SEA and/or SEB (40.0% to SEA and 93.3% to SEB). In this group, 11 subjects were S. aureus carriers (73.0%) and 12 had a history of allergic diseases (80.0%). Low levels of specific IgG antibody to SEB were identified from both S. aureus carriers and non-carriers. The S. aureus carriers had significantly higher levels of total IgE titer than the non-carriers and the individuals with a history of allergic diseases had significantly higher total IgE titer levels than those having no history of allergic diseases (p < 0.01). In the hemogramme patterns of S. aureus carriers, a significant positive correlation was observed between the total IgE antibodies and the eosinophil rate (p < 0.05), and a negative correlation (p < 0.001) was recognized between the neutrophil and the lymphocyte rates. 相似文献
We propose a new function of the two-dimensional lens array that is composed of many gradient-index lenses. The array forms three-dimensional (3D) images. The characteristics of the 3D images depend on the length of the gradient-index lens. Especially, if the length of the lens is an odd-integer multiple of the half period of the optical path, 3D images are pseudoscopic with a reversed depth. The two lens arrays are positioned at a suitable distance, so that orthoscopic 3D images with the correct depth are formed in front of the lens array. 相似文献
Abstract— A novel emitting vinyl polymer, poly[4‐(7‐{4‐[N,N‐bis(9,9‐dimethylfluoren‐2‐yl)amino]phenyl}‐2,1,3‐benzothiadiazol‐4‐yl)phenylethylene] (PVFABT), was designed and synthesized. The new vinyl polymer was found to form smooth amorphous films with a high glass‐transition temperature of 199°C. The polymer possesses bipolar character with both electron‐donating and accepting properties. It undergoes reversible anodic oxidation and cathodic reduction to give stable cation and anion radicals. It exhibits intense orange fluorescence in solution and as film. A multilayer organic electroluminescent device using PVFABT as an emitting material emitted orange light, exhibiting high performance. 相似文献
We carried out the growth of highly strained GaInAs-GaAs quantum wells (QWs) on a patterned substrate for extending emission wavelength on a GaAs substrate. We examined the shift of photoluminescence wavelength of the QWs and showed a large wavelength shift due to the spatial modulation in well thickness and indium composition. We demonstrated a single-mode multiple-wavelength vertical-cavity surface-emitting laser (VCSEL) array on a patterned GaAs substrate covering a new wavelength window of 1.1-1.2 /spl mu/m. By optimizing pattern shape, we achieved multiple-wavelength operation with widely and precisely controlled lasing wavelengths. The maximum lasing span is as large as 77 nm. We carried out a data transmission experiment through 5-km of single-mode fiber with a 2.5 Gb/s/channel. The total throughput reaches 10 Gb/s. The VCSEL-based wavelength-division-multiplexing (WDM) source would be a good candidate for WDM-LAN beyond 10 Gb/s. 相似文献