Numerical simulations of annular extrudate swell of polymer melts

Numerical viscoelastic simulations were carried out using a K-BKZ type of separable integral constitutive equation. Both reversible and irreversible models were tried for several types of damping functions to calculate the annular extrudate behavior of high-density polyethylene (HDPE). There are two aims in this study; first, to clarify the properties of these dumping functions, and second, to investigate the influence of rheological characteristics on annular extrudate swell. In these numerical simulations, relaxation spectrum and shear viscosity were fixed, and the other characteristics were varied. The reversional response of the damping function mainly has an effect on the magnitude of the area swell even if the die is straight. The irreversible model expresses the experimental results of annular extrudate swell better than the reversible model. The accurate fitting of N1 by the damping model is important for predicting it. The magnitude of N1 predicted from the Wagner exponential model is lower than that of the PSM model, and the area swell shows the same tendency as N1. A modified PSM model that allows the N1 curve to shift can fit the magnitude of area swell. The relationship between the diameter and thickness of the extrudate depends on N2/N1, and it was estimated by simple linear elasticity of solids. The time dependent viscosity varies with the type of damping function, and it influences the time-dependent swell.     

Creation of Ferroelectric, Single-Crystal Architecture in Sm0.5La0.5BGeO5 Glass

Using a novel, selective heating by Nd:YAG laser, a single-crystal architecture is created in a model glass system, Sm_0.5La_0.5BGeO₅, which devitrifies congruently into a ferroelectric phase of the same composition as the parent glass. The Sm³⁺ ions in glass absorb the light and heat the matrix locally resulting in devitrification. Initially, a polycrystalline spot is formed. However, with optimum laser power, scanning speed, and the depth of focus, one of the grains acts as the seed for further growth as a single crystal. By programming the relative displacement of the glass with respect to laser spot, desired single ferroelectric crystal architecture is created. The optical functionalities (guiding of light and second harmonic generation) of the architectures are shown, which demonstrate the viability of this method for constructing active elements in optical integrated circuits. The single-crystal nature of the architecture is confirmed from the electron backscattered diffraction results.     

TiO2 thin films using organic liquid materials prepared by Hot-Wire CVD method

TiO₂ thin films prepared by Hot-Wire CVD method have been studied as a protecting material of transparent conducting oxide (TCO) against atomic hydrogen exposures for the fabrications of Si thin film solar cells. It was found that electrical conductivity of the films at room temperature reached a value of 0.4 S/cm. This value is 2-3 orders of magnitude higher than that of TiO₂ films prepared by RF magnetron sputtering and electron-beam evaporation methods in our previous works. The conductivity improvement seems to be partly due to the enlargement of TiO₂ crystallites.     

Phase diagram and Raman spectroscopy of EuCl2---NaCl binary mixtures

A phase diagram of the EuCl₂---NaCl system was determined by differential scanning calorimetry (DSC) and the activity coefficients of EuCl₂ and NaCl in this system were estimated under some assumptions. According to DSC measurement, it was found that there were two phase transitions at 1123.9 K and 1016.8 K. In order to specify the melting point of EuCl₂ we did Raman spectroscopy experiments. Thus, the melting point of EuCl₂ was evaluated to be 1016.8 K which was detected as the lower peak in the DSC curve. Raman spectroscopy of this system suggested that complex species were not formed clearly in the EuCl₂ poor system and the estimated activity coefficients of EuCl₂ also supported this suggestion.     

Liposome‐Based in Vitro Evolution of Aminoacyl‐tRNA Synthetase for Enhanced Pyrrolysine Derivative Incorporation

Methanosarcina species pyrrolysyl‐tRNA synthetase (PylRS) attaches Pyl to its cognate amber suppressor tRNA. The introduction of two mutations (Y384F and Y306A) into PylRS was previously shown to generate a mutant, designated LysZ‐RS, that was able to attach N‐benzyloxycarbonyl‐L ‐lysine (LysZ) to its cognate tRNA. Despite the potential of LysZ derivatives, further LysZ‐RS engineering has not been performed; consequently, we aimed to generate LysZ‐RS mutants with improved LysZ incorporation activity through in vitro directed evolution. Using a liposome‐based in vitro compartmentalization (IVC) approach, we screened a randomly mutagenized gene library of LysZ‐RS and obtained a mutant that showed increased LysZ incorporation activity both in vitro and in vivo. The ease and high flexibility of liposome‐based IVC should enable the evolution of not only LysZ‐RS that can attach various LysZ derivatives but also of other enzymes involved in protein translation.     

Synthesis and photoinduced surface relief grating formation of novel photo-responsive amorphous molecular materials, 4-[bis(9,9-dimethylfluoren-2-yl)amino]-4′-cyanoazobenzene and 4-[bis(9,9-dimethylfluoren-2-yl)-amino]-4′-nitroazobenzene

Novel azobenzene-based photo-responsive amorphous molecular materials, 4-[bis(9,9-dimethylfluoren-2-yl)amino]-4′-cyanoazobenzene and 4-[bis(9,9-dimethylfluoren-2-yl)amino]-4′-nitroazobenzene, have been synthesized and the formation of surface relief grating on their amorphous films has been investigated. It was found that a relatively large surface relief grating could be inscribed on both amorphous films upon interference exposure to the writing laser beams. The modulation depth of the surface relief grating inscribed on the amorphous film of the cyano-substituted material was found to be larger than that inscribed on the film of the nitro-substituted one and seemed to be comparable to that inscribed on the amorphous film of the parent material, 4-[bis(9,9-dimethylfluoren-2-yl)amino]azobenzene. These results were discussed from the viewpoint of their trans–cis photoisomerizations as amorphous films and glass-transition temperatures.     

Use of multivariate analysis for the improvement in prediction accuracy of bacterial aerobic plate count by flow cytometry

Flow cytometry (FCM) and aerobic plate count (APC) by the culture method were performed on green tea samples spiked with Escherichia coli type strain NCTC9001 (ATCC11775) solutions of different concentrations. In FCM, fluorescence signals from multiple stained bacteria and other fluorophores are detected using detector channels, and recorded as events with a voltage at each channel. FCM data were analyzed in two ways: conventional and multivariate analysis. In the former, the number of events with voltages larger than the defined threshold values was regarded as the predicted APC. In the latter, voltage histograms of all channels were obtained and merged horizontally to serve as explanatory variables. Then a partial least squares regression (PLSR) model was built to predict APC from the histogram data. The coefficient of determination (R²) and the root mean square error (RMSE) between APC by the culture method and that predicted by conventional FCM were 0.916 and 1.08 cfu/ml². The APC values predicted by the PLSR model and those measured were in good agreement with R² of 0.982 and RMSE of 0.417 cfu/ml, which verified the potential of the proposed method for improving APC prediction accuracy by FCM.     

Micro 3D measurement method using SEM

Three diamensional (3D) measurement method by Scanning Electron Microscope (SEM) has already been proposed by using the principle of shadow moiré. In the method, the image of original grid in shadow moiré image must be clearly removed in fringe analysis process in order to perform high resolution analysis. A new method based on the principle of projection moiré is proposed to solve the trouble concerning the grid. In this paper, the mechanism of producing some shadows of grid on the surface of the object by back scattering electron beam in the new method is discussed. Fringe image as shadow of grid is analyzed by Wavelet transform. The precise 3D measurement is realized by using the phenomenon of shadows of grid. Furthermore, a 3D micro structure on the head of a hard disk is measured. From the comparison of results obtained by Atomic Force Microscope (AFM), it is confirmed that the proposed method has high-resolution power(about 20nm).     

Kinetics of Enthalpy Relaxation at the Glass Transition in Ternary Tellurite Glasses

The kinetics of enthalpy relaxation (recovery) at the glass transition in x K₂O·(20− x )MgO·80TeO₂ glasses has been examined from heat capacity measurements using differential scanning calorimetry to clarify the features of the structural relaxation in ternary TeO₂-based glasses. Ternary glasses such as 10K₂O·10MgO·80TeO₂ show high thermal resistance against crystallization compared with binary glasses. The degree of fragility m estimated from the activation energy for viscous flow E _η and the glass transition temperature T _g is m = 55–62, indicating a fragile character in TeO₂-based glasses. Large heat capacity changes of 43.1–48.2 J·mol⁻¹·K⁻¹ are also observed at the glass transition. The activation energy for enthalpy relaxation Δ H is evaluated from the cooling rate dependence of the limiting fictive temperature, and values of Δ H = 897–1268 kJ·mol⁻¹ are obtained. Negative deviation from additivity in Δ H is also observed. Values of the Kovacs–Aklonis–Huchinson–Ramos (KAHR) parameter θ estimated from Δ H and T _g are 0.33–0.42 K⁻¹. It has been proposed that ternary glasses have more homogeneous and constrained glass structure compared with binary glasses.