Evaluation of Two Sets of Sorghum Bagasse Samples as the Feedstock for Fermentable Sugar Recovery via the Calcium Capturing by Carbonation (CaCCO) Process

Abstract: Sorghum bagasse samples from two sets (n6 and bmr6; n18 and bmr18) of wild-type and corresponding “brown midrib” (bmr) mutant strains of sweet sorghum were evaluated as the feedstock for fermentable sugar recovery via the calcium capturing by carbonation (CaCCO) process, which involves Ca(OH)₂ pretreatment of bagasse with subsequent neutralization with CO₂ for enzymatic saccharification. Saccharification tests under various pretreatment conditions of the CaCCO process at different Ca(OH)₂ concentrations, temperatures or residence periods indicated that bmr strains are more sensitive to the pretreatment than their counterparts are. It is expected that variant bmr6 is more suitable for glucose recovery than its wild-type counterpart because of the higher glucan content and better glucose recovery with less severe pretreatment. Meanwhile, bmr18showed higher scores of glucose recovery than its counterpart did, only at low pretreatment severity, and did not yield higher sugar recovery under the more severe conditions. The trend was similar to that of xylose recovery data from the two bmr strains. The advantages of bmr strains were also proven by means of simultaneous saccharification and fermentation of CaCCO-pretreated bagasse samples by pentose-fermenting yeast strain Candida shehatae Cs 4R. The amounts needed for production of 1 L of ethanol from n6, bmr6, n18, and bmr18samples were estimated as 4.11, 3.46, 4.03, and 3.95 kg, respectively. The bmr strains seem to have excellent compatibility with the CaCCO process for ethanol production, and it is expected that integrated research from the feedstock to bioprocess may result in breakthroughs for commercialization.     

Validating the usefulness of examiners’ forward citations from the viewpoint of applicants’ self-selection during the patent application procedure

In this study, we validated the usefulness of examiners’ forward citations, especially from the viewpoint of the applicants’ self-selection (ASS) decisions during the patent application procedure. We believe that the ASS in an early stage would be decided by a potential-value comparison among patent applications. We focused on six self-selection decision points of the applicants: whether to file patent applications in foreign countries, request for examination, request for accelerated examination, reply to a notification of reasons for refusal, appeal after receiving a decision of refusal, and register after receiving a decision to grant a patent as patent value parameters. We found that application groups that selected “Yes” have a significantly larger number of examiners’ forward citations than groups that selected “No” at all decision points. In addition, we confirmed that applications that were finally granted and those that were renewed for a full term after grant have a significantly large number of examiners’ forward citations. We concluded that the number of examiners’ forward citations would be a useful indicator of the potential value of patent applications in macroscopic analysis.     

Phase Relations and Volume Changes of Hafnia under High Pressure and High Temperature

Using multi-anvil high-pressure devices and synchrotron radiation, X-ray in situ observations of HfO₂ under high pressure and high temperature have been performed to investigate its phase relations and compression behavior. An orthorhombic phase (orthoI) is stable from 4 to 14.5 GPa below 1250°–1400°C and transforms to a tetragonal phase, which is one of the high-temperature forms of HfO₂, above these temperatures. Another orthorhombic phase (orthoII) with a cotunnite-type structure appears above 14.5 GPa. OrthoII is stable up to 1800°C at 21 GPa. OrthoII is quenchable to ambient conditions. The orthoI-to-orthoII transition is accompanied by ∼8 vol% decrease. The bulk moduli of orthoI and orthoII at room temperature are 220 and 312 GPa, respectively. This low compressibility of orthoII indicates that it is a potential candidate for very hard materials.     

Experimental study on relationship between heat parameter and angular distortion

It is well known that weld residual stress and distortion should be controlled appropriately for structural integrity. Recently, it has become much more necessary to control weld distortion to highly improve manufacturing efficiency. Various studies on control of weld distortion had been conducted based on clarification of influential dominant factors for that. The influential dominant factors had been studied from a viewpoint of temperature distribution in plate thickness section. Without considering moving the weld heat source, the temperature distribution is controlled by weld heat input (Q_net) per weld length. Angular distortion, which is controlled by temperature distribution along the direction of plate thickness (h), is controlled by heat input parameter (Q_net/h²). However, it has recently become known that the conventional results cannot be applied to all welding processes because such processes are becoming more diversified. It is significant for more accurate control of angular distortion to investigate once again the relationship between the heat input parameter and angular distortion. In this study, a series of experiments on the relationship between heat input parameter and angular distortion are carried out. The effects of welding current and welding speed are investigated individually in both TIG and MAG welding. The difference between these welding methods is also investigated. Based on the result, the effects of them are discussed in relation to temperature distribution during welding. It is considered that angular distortion is affected by temperature distribution not only in plate thickness section but also along welding direction. So, angular distortion is not always controlled by only the conventional heat input parameter because the heat input parameter is proposed as the influential dominant factor for temperature distribution in plate thickness section. It is concluded that generation characteristics of inherent strain should be considered in relation to three-dimensional temperature distributions during welding for more accurate control of angular distortion.     

Effects of phenylenediamines and alkoxysilanes on gas transport properties of polyimide - silica hybrid membranes

Gas transport properties of polyimides (PIs) and their silica hybrids were investigated. The PIs synthesized with several methyl-substituted phenylenediamines were hybridized with silica via a sol–gel process with different alkoxysilanes. The prepared hybrid membranes showed controlled gas permselectivity, depending on the selected phenylenediamines and alkoxysilanes. It was worth noting that the hybrids prepared with tetraethoxysilane possessed improved CO₂ permselectivity with increasing silica content, which tended to exceed the upper-bound trade-off line. This fact suggested the additional formation of free volume holes especially favorable for the CO₂/CH₄ separation around the polymer/silica interfacial area.     

Thermal behaviors and flame‐retardancy of styrene–ethylene–butadiene–styrene–block copolymer containing various additives

The thermal behaviors and the flame‐retardancy of styrene–ethylene–butadiene–styrene–block copolymer containing various additives were studied. The combustion was measured by the Underwriter laboratory (UL) test and cone calorimeter test and thermogravimetric analysis and program‐mass spectroscopy were applied to analyze the thermal behaviors. The blend with halogen additives showed the best result in the UL test. However, the blend with red‐phosphorous was the best in the cone calorimeter test. As the styrene sequence in the copolymer tended to degradate at a lower temperature, the major scission products spouted out from the polymer surface originated from polystyrene. The shorter the ignition times of the blends with red‐phosphorous were, the lower the peak heat release rates were. It was an interesting phenomenon because it suggested that the chemical structure of the residue changed to more stable polymers. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 156–161, 2007     

Development of numerical scheme for phase field crystal deformation simulation

The phase field crystal (PFC) method is anticipated as a new multiscale method, because this method can reproduce physical phenomena depending on atomic structures in metallic materials on the diffusion time scale. Although the PFC method has been applied to some phenomena, there are few studies related to evaluations of mechanical behaviors of materials by appropriate PFC simulation. In a previous work using the PFC method, tensile deformation simulations have been performed under conditions where the volume increases during plastic deformation. In this study, we developed a new numerical technique for PFC deformation simulation that can maintain a constant volume during plastic deformation. To confirm that the PFC model with the proposed technique can reproduce appropriate elastic and plastic deformations, we performed a series of deformation simulations in one and two-dimensions. In one- and two-dimensional single-crystal simulations, linear elastic responses were confirmed in a wide strain rate range. In bicrystal simulations, we could observe typical plastic deformations due to the generation, annihilation and movement of dislocations, and the interaction between the grain boundary and dislocations. Moreover, the deformation behaviors of a nanopolycrystalline structure at high temperature were simulated and the intergranular deformations caused by grain rotation and grain boundary migration were reproduced.     

Control of spectral emittance using a rare‐earth oxide film coated on a ceramic plate

The spectral emission of a ceramic plate coated with a rare‐earth oxide thin film was investigated for thermophotovoltaic (TPV) applications using a one‐dimensional radiative transfer analysis. The selective emitter has emission bands at wavelengths around 1 and 1.5 μm due to erbium. In the temperature range between 1400 and 1500 K, the radiant energy within these bands is remarkably large, because the Planck distribution has a peak at a wavelength of approximately 2 μm. In addition, the spectral response of a GaSb TPV cell has a peak at around 1.5 μm; therefore, the radiant energy of the emission bands is quite useful for the TPV generation of electricity. The total spectral efficiency for both the 1 μm and 1.5 μm bands reaches a maximum value of 0.295 for a film thickness between 0.2 and 0.3 mm. © 2010 Wiley Periodicals, Inc. Heat Trans Asian Res; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/htj.20286     

Coupling-loss reduction of a vertically coupled microring resonator filter by spot-size-matched busline waveguides

To improve the input-output coupling loss of a vertically coupled microring resonator filter, we fabricated microring resonators on an antiresonant reflecting optical waveguide (ARROW) with a large spot size and on the rectangular busline waveguide with a spot-size transformer. The spot size and the tapered structure were optimally designed from the viewpoint of spot-size matching to single-mode fibers and the reduction of radiation loss. Clear dropping responses were demonstrated for the ARROW-based microring resonator filters, and the coupling loss was successfully reduced by 22 dB.