A decentralized control system for stabilizing multimachine power systems

A decentralized control system is studied for stabilizing multimachine power systems. A longitudinal power system with three areas, each having one machine, is considered in this study. A decentralized control design method is proposed, which is based on the optimal regulator theory. First a centralized control system is designed without any consideration on whether state variables are all available or not. Second a pseudo-decentralized control system is designed by omitting control gains corresponding to state variables which give hardly any effects on the power system stability. It is found that only one variable of phase angle of each machine is absolutely necessary for the pseudo-decentralized control system. This leads to an idea based on power system engineering, that is to say, new variables of tieline power flow are introduced in the decentralized control system design to substitute for the phase angle of each machine. Thus a decentralized control system for power system stability can be designed using the new variables of tieline power flow. It is demonstrated from simulation studies that the decentralized control system improves even longitudinal power system stability as well as the centralized control system.     

Preparation of ultrafine zirconium dioxide particles by thermal decomposition of zirconium alkoxide vapour

Ultrafine zirconia particles are produced by thermal decomposition of zirconium tetratertiary butoxide (ZrTB) vapour. The introduction of ZrTB vapour into the cylindrical electric furnace, is achieved by three different methods: (evaporator, pressurized nebulizer and ultrasonic nebulizer). The properties of the fine particles obtained by these methods are mainly analysed by X-ray diffraction and transmission electron microscopy. It is found that ultrafine zirconia particles produced at relatively low temperatures from 600 to 700° C are spherical in the diameter range 0.035 to 0.15 μm and of tetragonal phase. Furthermore, two-component fine particles of zirconia-ilver are generated by putting the silver solid inside the furnace containing alkoxide vapour, and are deposited by inertia on to a glass substrate under low pressure to form films having a thickness of 17 to 33 μm. The electrical characteristics of the films are evaluated, and the conductance of the film is found to increase with the content of the silver component.     

Crystallographic evaluation of ZnSe crystals by x-ray diffraction

Crystallographic quality and the lattice constant of ZnSe crystals grown from Te/ Se solutions by the temperature gradient solution growth method were evaluated by using a high resolution x-ray diffractometer. The full width at half maximum of the x-ray rocking curve was 5.7 sec, a value almost equivalent to that of GaAs. The distribution of crystallographic properties along the growth direction was nearly the same excepting just on the heat-sink. The accurate lattice constant of the ZnSe crystal measured by this system was 5.6700 ± 0.000025 A.     

Effect of heat‐sealing temperature on the properties of OPP/CPP heat seals. Part II. Crystallinity and thermomechanical properties

The crystalline structure of the heat‐sealed part of oriented polypropylene (OPP) and cast polypropylene (CPP) films was investigated by differential scanning calorimetry, Fourier transform infrared spectroscopy, and thermal mechanical analysis (TMA). The relationship between the crystalline structure and the mechanical properties was analyzed. It was found that the high total crystallinity of both OPP and CPP gave rise to good mechanical properties and that the orientation of the crystalline structure in the OPP film also was an important factor. The optimum condition for heat sealing was the temperature at which total crystallinity was highest while still retaining the crystalline orientation of OPP. The assessment of crystalline orientation by TMA is an innovation initiated by the authors. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 513–519, 2006     

Effect of heat‐sealing temperature on the failure criteria of oriented polypropylene/cast polypropylene heat seal

Failure criteria of the heat‐sealed part of oriented polypropylene (OPP) and cast polypropylene (CPP) heat seals made by an impulse type heat‐sealing machine were investigated. Circular notches and precracks were introduced to direct failure to specific areas such as inside the seal, at the border, or at the unsealed part. The notched strength as a function of heat‐sealing temperature revealed that the seals were stronger in the transverse direction (TD) as compared with the machine direction (MD). Tensile failure that occurred inside the heat seal is more sensitive to sealing temperature, whereas that at the unsealed part is immune. The stress intensity factor (K₁) is generally higher along the TD. At high sealing temperatures, i.e. above 150°C, orientation in the OPP film is relaxed and this results in consistently low mechanical properties at this temperature range. This morphology was revealed by studies of crystalline orientation state and FTIR imaging. POLYM. ENG. SCI., 46:205–214, 2006. © 2005 Society of Plastics Engineers     

超声回波特征值的统计学分析方法

介绍了一种基于统计学假设检验理论进行模式识别中的特征评价与选择的方法，该方法理论意义比较清楚，计算简单，能够选出合适的特征，其实现是采用统计学中t检验方法来进行的，即用检验各组样本特征之间差异是否显著，来评价所提取的特征值的优劣；采用启发武方法和判别分析来进一步考察所提取的特征值的分类效果．实现了超声回波特征空间的降维处理与最佳特征子集选择。     

Depletion layer in pn-junction of diamond with phosphorus donor and boron acceptor

In order to understand characteristics of diamond pn-junction, ionized dopant and carrier profiles in pn-junction of diamond with phosphorus (P) donor and boron (B) acceptor are calculated. There exists a large transition region at a depletion layer edge due to Debye tailing at room temperature (RT). The length of Debye tailing, λ, is reduced with increasing compensation ratios and temperatures. The Debye tailing is predicted to facilitate an early effect of a pnp-bipolar transistor.     

Development of XLPE insulated DC cable

This paper describes the development of dc XLPE cable. Through a series of material investigations, an XLPE compound containing highly purified special filler was developed. To check the dc insulation performance of the cable insulated with this new material, a prototype cable with 9 mm insulation thickness was manufactured. It was confirmed that the performance of the prototype cable was excellent. Based on the study of the prototype cable, a 250-kV dc cable with 20 mm insulation thickness was designed and manufactured. Through a series of voltage tests, excellent dc insulation performance of the developed cable was verified.     

Numerical analysis of waveguide bandpass filters using singular integral equations and construction of simple design formulas

A powerful numerical solution is presented for bandpass filters in rectangular waveguides. The filters are composed of cascading of perfectly conducting inductive obstacles with zero thickness: asymmetrical windows, symmetrical windows, or symmetrical strips. The problem is reduced to a set of singular integral equations, which is solved by an extension of Lewin's quasi‐static procedure. After the accuracy of the classical formulas for the equivalent reactance is investigated, the simple inverse formulas are constructed to yield proper window widths for desired equivalent parameters. Their effectiveness is demonstrated by designing practical filters having maximally flat or equal‐ripple characteristics. © 2004 Wiley Periodicals, Inc. Electr Eng Jpn, 148(4): 17–25, 2004; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.10251