Characterization of plasma membrane H+-ATPase from salt-tolerant yeast Candida versatilis

Plasma membrane was isolated from the salt-tolerant yeast Candida versatilis and the ATPase in plasma membrane was characterized. The ATPase was a typical H⁺-ATPase with similar properties to the Saccharomyces cerevisiae and Zygosaccharomyces rouxii enzymes. It was reacted with antibody (IgG) raised against S. cerevisiae plasma membrane H⁺-ATPase. The ATPase activity was not changed by adding NaCl and KCl to the assay solutions, but was increased by NH, especially by ammonium sulfate. In vivo stimulation of ATPase activity was observed by the addition of NaCl into the culture medium, as observed in Z. rouxii. No in vivo activation of H⁺-ATPase by glucose metabolism was observed in C. versatilis cells and the activity was independent of the growth phase, like Z. rouxii and unlike S. cerevisiae cells.     

Automated single nucleotide polymorphism typing using bead array in capillary tube

A low-cost and simple on-site technique for genotyping single nucleotide polymorphisms (SNPs) was developed. The technique is based on allele-specific primer PCR and the recently developed bead arrays in a single tip technique. The performance of the method was verified by genotyping four SNPs that correlate with cardiovascular diseases.     

Bulk heterojunction organic solar cells utilizing 1,4,8,11,15,18,22,25-octahexylphthalocyanine

Bulk heterojunction solar cells utilizing soluble phthalocyanine derivative, 1,4,8,11,15,18,22,25-octahexylphthalocyanine (C6PcH₂) have been investigated. The active layer was fabricated by spin-coating the mixed solution of C6PcH₂ and 1-(3-methoxy-carbonyl)-propyl-1-1-phenyl-(6,6)C61 (PCBM). The photovoltaic properties of the solar cell with bulk heterojunction of C6PcH₂ and PCBM demonstrated the strong dependence of active layer thickness, and the optimized active layer thickness was clarified to be 120 nm. By inserting MoO₃ hole transport buffer layer between the positive electrode and active layer, the FF and energy conversion efficiency were improved to be 0.50 and 3.2%, respectively. The tandem organic thin-film solar cell has also been studied by utilizing active layer materials of C6PcH₂ and poly(3-hexylthiophene) and the interlayer of LiF/Al/MoO₃ structure, and a high V_oc of 1.27 V has been achieved.     

Colorectal Laterally Spreading Tumors by Computed Tomographic Colonography

To date, few reports focused primarily on detecting colorectal laterally spreading tumors (LSTs) have been published. The aim of this study was to determine the visibility of LSTs on computed tomographic colonography (CTC) compared with that on colonoscopy as a standard. We retrospectively reviewed and matched data on endoscopic and CTC reports in 157 patients (161 LSTs) who received a multidetector CT scan using contrast media immediately after total colonoscopy at the National Cancer Center Hospital in Tokyo, Japan, between December 2005 and August 2010. The results of the total colonoscopy were known at the time of the CTC procedure and reading. Of the 161 LSTs detected on colonoscopy, 138 were observed and matched by CTC (86%). Of the 91 granular type LSTs (LST-Gs), 88 (97%) were observed and matched, while of the 70 non-granular type LSTs (LST-NGs), 50 (71%) were observed and matched by CTC (p < 0.0001). CTC enabled observation of 73% (22/30) of 20–29 mm, 83% (35/42) of 30–39 mm, 88% (49/56) of 40–59 mm, and 97% (32/33) of ≥60 mm tumors. The rate of observed LSTs by CTC was 86% (97% of LST-G, 71% of LST-NG) of the LSTs found during total colonoscopy.     

Fabrication and electrical properties of SrTiO3/diamond junctions

Strontium titanate (STO) films were directly deposited on Ib (100) single crystal diamond by r.f. magnetron sputtering. The as-deposited STO film was in amorphous state. On the other hand, the crystalline STO film was obtained under the optimized condition of a deposition temperature of 250 °C and a post-annealing temperature of 650 °C. STO/diamond junctions were fabricated on boron-doped homoepitaxial layers grown on p⁺-type single crystal diamond substrates. Electrical properties of the STO/diamond junction were investigated by changing the surface terminations of diamond with hydrogen or oxygen and the crystallinity of the STO film. It was found that the amorphous STO acted like a semi-insulator on H-diamond surface and that the amorphous STO/O-diamond junction behaved like a Schottky diode. The crystalline STO/O-diamond showed a complex rectifying behavior. The crystalline STO film possessed a higher dielectric constant as compared to that of the amorphous one.     

Slug to annular flow transition during boiloff in a rod bundle under high-pressure conditions

High-pressure boiloff experiments in a wide range of bundle powers by using the Two-Phase Flow Test Facility (TPTF) were conducted. Two kinds of boiloff patterns were observed in these experiments. One is the boiloff pattern in a low bundle power, in which the dryout points of rods locate at a certain elevation in the bundle because the mixture level controls the dryout points. The other is the boiloff pattern in a high bundle power, in which the clear mixture level can not be observed and the dryout points of rods locate in a wide range of vertical directions. The vertical scatter of the dryout points is considered to be due to the break of the thin water film on the heater rods under the annular flow pattern.A simple model to predict the slug to annular flow transition in the rod bundle is proposed. In the model, the slug to annular flow transition takes place when the interferences of the water films on the neighboring rods cease. The model appeares to give good predictions of the previous flow transition experiment conducted in a rod bundle. The slug-annular transition below the dryout points was predicted with the present model in the high power boiloff experiments of TPTF. No slug-annular transition below the dryout points is predicted with the present model in the low power boiloff experiments.     

Identification and field evaluation ofAnomala octiescostata (Coleoptera: Scarabaeidae) sex pheromone

Using GC-EAD, the sex pheromone of the scarab beetleAnomala octiescostata was identified to be a 8:2 binary mixture of (R,Z)-5-(–)-(oct-1-enyl)oxacyclopentan-2-one and (R,Z)-5-(–)-(dec-1-enyl)oxacyclopentan-2-one. These semiochemicals have been also reported as sex pheromone constituents of otherAnomala species, either geographically or seasonally isolated fromA. octiescostata. Synthetic sex pheromone was highly attractive in the field; 0.1 mg captured significantly more males than two virgin females. Buried traps were significantly more attractive than those positioned at 30, 90, and 150 cm above the ground. In a dose-response test (0.1–100 mg), no saturation due to overdose of pheromone was observed, but in most cases, two dosages differing by 10-fold were not significantly different. Response of males to traps baited with different ratios of the two components was tested in two experiments with randomized blocks and Latin-square designs. Deviation from the natural ratio (8:2) of sex pheromone did not significantly diminish the response of males. Peak flight activity of beetle was recorded at 9:00–10:00 AM JST on sunny days in the end of April 1993.Presented in part at the 10th Annual ISCE Meeting, July 31–August 4, 1993, Clearwater Beach, Florida.     

Segregation Effects at Grain Boundaries in Fluorite-Structured Ceramics

The atomic-scale structure, composition, and chemistry of grain boundaries in two fluorite-structured ceramic materials were characterized by a combination of Z -contrast imaging and electron energy-loss spectroscopy (EELS). In the case of a symmetric 24° [001] tilt bicrystal of yttria-stabilized-zirconia (YSZ), a shift in the zirconium M -edge onset and a change in the yttrium and zirconium M -edge ratios at the boundary indicate an increase in the number of electrons in the boundary plane. A detailed study of the structure and composition indicates that this is caused by an increase in the number of oxygen vacancies in the grain boundary core that is partially compensated by yttrium segregation. Studies of grain boundaries in an industrial Gd-doped ceria ceramic reveals similar changes in vacancy/dopant profiles indicating that these effects may be generic to grain boundaries in fluorite-structured materials.     

Characterization of plasma membrane proton-ATPase from salt-tolerant yeast Zygosaccharomyces rouxii cells

Plasma membrane was isolated from the salt-tolerant yeast Zygosaccharomyces rouxii and from Saccharomyces cerevisiae. The ATPase in the plasma membrane of Z. rouxii cells was a typical proton-ATPase as judged by testing with various ATPase inhibitors. There were slight differences in the pH optima of activities and in the sensitivity to sodium chloride (NaCl) and potassium chloride (KCl) of the ATPase from Z. rouxii and S. cerevisiae. The specific ATPase activity from Z. rouxii was higher in cells grown in a medium containing 2 _M-NaCl than in those not containing NaCl. No in vivo activation by incubation with glucose was observed in Z. rouxii cells and the specific ATPase activity was independent of the growth phase, unlike S. cerevisiae cells.     

The influence of mash pre-aging on the development of the flavour-active compound, 4-hydroxy-2(or5)-ethyl-5(or2)-methyl-3(2H)-furanone (HEMF), during soy sauce fermentation

Inoculation of Zygosaccharomyces rouxii into a soy sauce mash free from lactic acid bacteria at 10⁶ cells mL⁻¹ resulted in the formation of the flavour-active compound HEMF over a number of days at 30°C. Delays in inoculation up to 14 days after production of the mash greatly increased the amount of HEMF formed and under some conditions concentrations in the commercial range were achieved without addition of any other microorganisms.