Addition polymerization of norbornene, 5-vinyl-2-norbornene and 2-methoxycarbonyl-5-norbornene with a catalyst based on a palladium(0) precursor complex

Pd(dibenzylideneacetone)₂, when activated in situ with 1 equiv of [CPh₃][B(C₆F₅)₄] in the presence of 1 equiv of P(C₆H₁₁)₃, efficiently catalyzed the addition polymerization and copolymerization of norbornene and its derivatives. Homopolymerization of 5-vinyl-2-norbornene took place regio-selectively with the endo-cyclic double bond to give high-molecular weight polymers, while the exocyclic double bond remained intact so that the resulting polymer had pendent vinyl groups along the polymer chain. In the polymerization of a mixture of the endo-/exo- isomers of 2-methoxycarbonyl-5-norbornene, the endo-isomer was consumed prior to consumption of the exo-isomer, contrary to the well-known tendency in Pd(II)-based catalyst systems. Another notable feature of the present catalytic system was the strong dependency of the molecular weight on the reaction temperature, which was studied in detail for the copolymerization of 2-methoxycarbonyl-5-norbornene with norbornene: we could control the molecular weight without the use of a chain transfer agent. The extracted oligomeric fraction of poly(norbornene) showed the presence of a terminal CC double bond as well as a C₆F₅ unit that was bound to the first norbornane unit in the polymer chain.     

Decay of material properties of degraded MEA caused by repeated cold starts under subzero conditions in polymer electrolyte fuel cells

This study investigated the characteristics of cell performance degradation, decline of component performance, and changes in the properties of membrane electrode assembly materials caused by repeated cold starts under a subzero condition of ?30 °C. It was made clear that functional decay appeared mainly at the cathode due to increased proton conductive impedance and reduction of reactivity of the electrode catalyst. Among the cathode components, an increase in proton conductive impedance in the cathode electrolyte was dominant. Furthermore, the application of ion chromatography and a newly developed proton‐induced gamma‐ray emission method to measure fluorine in the off‐gas drain revealed that decomposition of the electrolyte was dominant in the cathode catalyst layer. A decrease in fluorine in the cathode electrolyte measured by fluorine‐19 nuclear magnetic resonance confirmed this decomposition. A hypothesis is also presented concerning the cause of the performance degradation. © 2012 Wiley Periodicals, Inc. Heat Trans Asian Res; Published online in Wiley Online Library ( wileyonlinelibrary.com/journal/htj ). DOI 10.1002/htj.20394     

Mesophase structure discovered through in-situ X-ray measurement in drawing process of poly(ethylene 2,6-naphthalene dicarboxylate) fiber

The structure development in the continuous laser-heated drawing process of poly(ethylene 2,6-naphthalene dicarboxylate) (PEN) fiber was analyzed by in-situ X-ray diffraction measurement. Because of the rapid and uniform laser heating, and the resultant steady-state nature of the necking-drawing, the structure development after the on-set of necking could be measured in the time resolution of several hundred microseconds. We found for the first time the temporal appearance of meridional (001′) diffraction at several milliseconds after the on-set of necking indicating that the mesophase structure similar to the one reported for poly(ethylene terephthalate) was also formed in the initial stage of fiber structure development of PEN. The d-spacing of the (001′) diffraction 1.230 ± 0.003 nm was shorter than the c-axis lengths of both α and β crystals.     

High-Performance Induction Motor Drive System Using a PWM Inverter

A high-performance speed control system for cage induction motors is described which utilizes a PWM inverter. The effects of primary current coincidence and machine constant variation on system characteristics such as response time, torque precision, and operating noise were investigated. Based on the results obtained, new control methods have been devised; one varies the gain of the current controller in proportion to the primary frequency, and a second compensates for the slip frequency by using the deviation between the flux reference value and the actual value. Effectiveness of the compensation methods was confirmed in tests.     

X-ray absorption fine structure combined with fluorescence spectrometry for monitoring trace amounts of lead adsorption in the environmental conditions

The local structure of trace amounts of lead in an adsorbent matrix that contains a high concentration of iron and magnesium (Mg6Fe2(OH)16(CO3) x 3H2O) was successfully monitored by means of X-ray absorption fine structure spectroscopy combined with fluorescence spectrometry. A eutectic mixture of PbCO3 and Pb(OH)2 coagulated when Pb2+ was adsorbed from a 1.0 ppm aqueous solution, and in contrast, the major species was ion-exchanged Pb2+ in the case of adsorption from a 100 ppb aqueous solution. The difference was ascribed to the balance between the precipitation equilibrium for coagulation and the rate of the ion exchange reaction with surface hydroxyl groups.     

Coupling-loss reduction of a vertically coupled microring resonator filter by spot-size-matched busline waveguides

To improve the input-output coupling loss of a vertically coupled microring resonator filter, we fabricated microring resonators on an antiresonant reflecting optical waveguide (ARROW) with a large spot size and on the rectangular busline waveguide with a spot-size transformer. The spot size and the tapered structure were optimally designed from the viewpoint of spot-size matching to single-mode fibers and the reduction of radiation loss. Clear dropping responses were demonstrated for the ARROW-based microring resonator filters, and the coupling loss was successfully reduced by 22 dB.     

Fan noise reduction of household refrigerator

The authors describe the method of reducing the fan noise, especially the impeller noise, of a household refrigerator. The fan in the refrigerator tested is a propeller fan, and the fan unit consists of an impeller, which has four blades, a rear board, which covers the evaporator, and a front board, which has a number of openings. The flow through the openings freezes food in the freezer. By measuring the internal flow with a laser Doppler velocimeter, it was made clear that the flow through the impeller was not symmetrical to the axis. The unsymmetrical flow seems to be caused by the restrictions of flow passages, and it might produce the impeller noise. The search for the sound source by the sound intensity method indicated that the noise was radiated through the openings of the front board. Guiders were installed on the rear board in the fan unit to guide the flow away from the openings. As a result, the impeller noise was reduced, whereas the flow was kept almost the same     

Positron annihilation lifetime study of vapor sorption in polypropylene and polytetrafluoroethylene

Positron annihilation lifetime (PAL) spectra were measured for two different kinds of polymers: polypropylene (PP) and polytetrafluoroethylene (PTFE), during sorption of vapors of the following molecules: n-hexane, cyclohexane, benzene, methyl methacrylate, acrylic acid, and water. The behavior of ortho-positronium (o-Ps) annihilation parameters: lifetime, τ₃, and intensity, I₃, can be explained by considering different sorption mechanisms in rubbery and glassy polymers. The mean size of the intermolecular-space holes and the relative free-volume fraction of PP and PTFE were estimated before and during the sorption process from the o-Ps parameters obtained. Sorption of n-hexane, cyclohexane, and benzene in both polymers affect the o-Ps component in a systematic way, for PP τ₃ and I₃ tend to decrease, while in PTFE, τ₃ stay almost constant and I₃ diminishes. These effects are interpreted in relation to the different states of the polymers studied: rubbery for PP and glassy for PTFE. In case of methyl methacrylate molecules, the behavior of o-Ps parameters was more complicated. For acrylic acid and water, their associated polarity provokes a diminution in I₃, which is explained from the viewpoint of the spur model of positronium formation. Large changes in the mean size and the fraction of free volume, as well as their constant behavior in some cases, were interpreted to be due to positive or negative interactions, respectively, between vapor molecules and PP and PTFE, which could be correlated with the solvent-interaction parameters calculated. © 1995 John Wiley & Sons, Inc.