Homology-Based Interactions between Small RNAs and Their Targets Control Dominance Hierarchy of Male Determinant Alleles of Self-Incompatibility in Arabidopsis lyrata

Self-incompatibility (SI) is conserved among members of the Brassicaceae plant family. This trait is controlled epigenetically by the dominance hierarchy of the male determinant alleles. We previously demonstrated that a single small RNA (sRNA) gene is sufficient to control the linear dominance hierarchy in Brassica rapa and proposed a model in which a homology-based interaction between sRNAs and target sites controls the complicated dominance hierarchy of male SI determinants. In Arabidopsis halleri, male dominance hierarchy is reported to have arisen from multiple networks of sRNA target gains and losses. Despite these findings, it remains unknown whether the molecular mechanism underlying the dominance hierarchy is conserved among Brassicaceae. Here, we identified sRNAs and their target sites that can explain the linear dominance hierarchy of Arabidopsis lyrata, a species closely related to A. halleri. We tested the model that we established in Brassica to explain the linear dominance hierarchy in A. lyrata. Our results suggest that the dominance hierarchy of A. lyrata is also controlled by a homology-based interaction between sRNAs and their targets.     

Mass transfer in polycrystalline ytterbium monosilicate under oxygen potential gradients at high temperatures

Mass transfer in polycrystalline Yb₂SiO₅ wafers with precise composition control was evaluated and analyzed by oxygen permeation experiments at high temperatures using an oxygen tracer. Oxygen permeation proceeded due to mutual grain boundary diffusion of oxide ions and Yb ions without synergistic effects such as acceleration or suppression. The oxygen shielding properties of Yb₂SiO₅ were compared with those of the other line compounds such as Yb₂Si₂O₇ and Al₂O₃ based on the determined mass transfer parameters. It was found that the more preferentially an oxide ion diffuses in the grain boundary compared to the interior of the grain, the greater the effect of suppressing the movement of the oxide ion by applying an oxygen potential gradient becomes.     

Shock sensitivity of blasting explosive cartridges

Abstract

The undersand variable gap–initiator test was applied to most Japanese blasting explosive cartridges and found useful as the sensitivity test for the cartridges. The recent Japanese watergel and emulsion explosives were shown to be more shock–sensitive than previous ones. The blast noise in the undersand explosion was shown to decrease when the depth of sand cover the cartridge was increased. For 100g of explosive, a sand layer 20cm deep was effective in reducing the blast noise, when the depth of the sand layer was increased, there was no additional effect. All blasting explosives excluding Kuro Carlit were not ignited by a small gas flame. A cartridge of 100g Kuro Carlit was ignited undersand but did not show the phenomenon of deflagration to detonation     

Purification and characterization of a novel glutamyl aminopeptidase from chicken meat

A novel glutamyl aminopeptidase (aminopeptidase A, EC 3.4.11.7) was purified from chicken meat by ammonium sulfate fractionation, ethanol fractionation, heat treatment, and successive column chromatographies of DEAE-Sepharose CL-6B and Sephadex G-200. The purified enzyme migrated as a single band on SDS-PAGE. The molecular weight of this enzyme was found to be 55,000 and 550,000 by SDS-PAGE and Sephadex G-200 column chromatographies, respectively. This enzyme hydrolyzed Glu- and Asp-, but not Leu-, Arg-, and Ala-2-naphthylamide (-2NA) at all. The optimum pH and temperature for hydrolysis of Glu-2NA was 7.5. and 70°C, respectively. Reducing agents such as cysteine and dithiothreitol inhibited the activity of this enzyme at concentrations of 1 mM. However, the activation by Ca(2+) and the inhibition by amastatin were not observed.     

Facile fabrication of mesoporous TiO2 electrodes for dye solar cells: chemical modification and repetitive coating

A chemical dispersing technique for preparing a coating paste of TiO₂ nanoparticles is disclosed to fabricate mesoporous electrodes for dye-sensitized TiO₂ solar cells. The suspension of TiO₂ (P-25) powder was stirred in aqueous nitric acid at 80°C, and then evaporated to dryness, giving the nitric acid-adsorbed P-25 powder. The coating paste was obtained by mixing the nitric acid-adsorbed P-25 with PEG (M_w 20,000) as a porosity-controlling agent and cellulosic polymer as a thickener. The mesoporous TiO₂ films were fabricated on conducting glasses by repetitive coating and calcined at 500°C (30 min). The TiO₂ film obtained by the five times repetitive coating (20 μm thickness) resulted in the 1.4 times higher energy conversion efficiency of the dye-sensitized solar cells than that of the one time coating TiO₂ film (V_oc=690 mV, J_sc=12.2 mA/cm², the fill FACTOR=0.71 and η=6.0%).     

Compact Tunable Narrowband Terahertz-Wave Source Based on Difference Frequency Generation Pumped by Dual Fiber Lasers in MgO:LiNbO<Subscript>3</Subscript>

We demonstrate a high-average-power, single longitudinal-mode, and tunable terahertz (THz)-wave source based on difference frequency generation (DFG) in a MgO:LiNbO₃ (MgO:LN) crystal. The waves for DFG are generated using a pair of Yb-doped pulsed fiber lasers with a master oscillator power fiber amplifier configuration. The average power of the THz-wave output reaches 450 μW at 1.07 THz (280 μm) at a linewidth of 7.2 GHz, and the tunability ranges from 0.35 to 1.07 THz under the pulse repetition frequency of 500 kHz. A short burn-in test of the THz wave is also carried out, and the output power stability is within ± 5% of the averaged power without any active stabilizing technique. The combination of MgO:LN-DFG and stable and robust fiber laser sources is highly promising for the development of high-average-power THz-wave sources, particularly in the high transmission sub-THz region. This approach may enable new applications of THz-wave spectroscopy in imaging and remote sensing.     

Synergistic effect of Pt or Pd and perovskite oxide for water gas shift reaction

The water gas shift (WGS) reaction over Pt and Pd catalysts supported on various perovskite oxides has been investigated at 573 K without catalyst pretreatment. The Pt and Pd catalysts on LaCoO₃ support showed high catalytic activity. Interaction between Pt or Pd and the support is considered to promote the WGS reaction: Pt/LaCoO₃ had high initial activity but deactivated immediately; Pd/LaCoO₃ was less active than Pt/LaCoO₃, but had superior stability. Catalysts were characterized using XRD, STEM, XPS, and H₂-temperature programmed reduction (TPR). Results of this study showed that reduction of the support decreased the CO conversion on Pt/LaCoO₃. On the other hand, Pd/LaCoO₃ showed stable activity for the WGS reaction. Therefore, Pd was added to Pt/LaCoO₃ for stabilizing the catalyst activity, and 0.5 wt.% Pd/1 wt.% Pt/LaCoO₃ catalyst showed higher activity and stability.     

Microstructure and electrochemical behavior of Ti-coatedZr55Al10Ni5Cu30 bulk metallic glass

In this study, pure Ti was coated on Zr₅₅Al₁₀Ni₅Cu₃₀ bulk metallic glass (BMG) using a physical vapour deposition (PVD) technique with magnetron sputtering. Microstructures of Ti coating, BMG substrate and interface were investigated by conventional and high-resolution transmission electron microscopy (TEM and HREM). The electrochemical behavior of Ti-coated Zr₅₅Al₁₀Ni₅Cu₃₀ BMG was studied by potentiodynamic polarization curves and electrochemical impedance spectroscopy (EIS) in Hanks' solution. Scanning electron microscopy (SEM) was used to characterize the surface morphology of the coating after electrochemical testing. HRTEM observation reveals that the sputtering Ti coating consists of α-Ti nano-scale particles with the size about 10 nm. The polarization curves revealed that the open-circuit potential shifted to a more positive potential and the passive current density was lower after Ti coating was applied in comparison with that of the monolithic Zr₅₅Al₁₀Ni₅Cu₃₀ BMG. Electrochemical impedance spectroscopy (EIS) measurements showed that the Bode plots of Ti-coated Zr₅₅Al₁₀Ni₅Cu₃₀ BMG presented one time constant for 1 h and 12 h immersion and two time constants after 24 h immersion. The good bonding condition between Ti coating and Zr₅₅Al₁₀Ni₅Cu₃₀ BMG substrate may be responsible for the high corrosion resistance of Ti-coated Zr₅₅Al₁₀Ni₅Cu₃₀ BMG.     

Ti-Containing Silsesquioxane Gels with Tunable Porosity: Preparation and Catalytic Activity for the Epoxidation of Cyclooctene by Aqueous Hydrogen Peroxide

Novel Ti-containing silsesquioxane gel catalysts were prepared by the hydrosilylative condensation of Ti-containing silsesquioxanes together with cubic silsesquioxanes and spherosilicates. The porosity of gels was controlled by changing the composition and the mixing order of the starting materials. Both porous and nonporous gels were found to act as excellent heterogeneous catalysts towards the selective epoxidation of cyclooctene by the use of aqueous hydrogen peroxide as an oxidant.     

Gas phase oxidation of benzene to phenol using Pd-Cu composite catalysts. Effect of temperature,feeding gas and catalyst composition

Catalytic oxidation of benzene in the gas phase has been studied as a function of the catalyst composition, reaction temperature and the feed conditions of reactant gases, hydrogen, oxygen, benzene as well as diluting inert gas. The catalyst tested is composed of Pd and Cu(I) ions, both of which are supported on silica gel. If one of the two metal species is lacked from the catalyst, no catalytic activity appears. The product is almost exclusively phenol and some accompanying benzoquinone, in particular at lower temperatures, as minor byproduct.On leave from Hua-Dong Institute of Technology, Nanjing, People's Republic of China.