Formation of silicon dioxide layers at low temperatures (150-400 °C) by atmospheric pressure plasma oxidation of silicon

The formation of silicon dioxide (SiO₂) layers at low temperatures (150-400 °C) by atmospheric pressure plasma oxidation of Si(0 0 1) wafers have been studied using a gas mixture containing He and O₂. A 150 MHz very high frequency (VHF) power supply was used to generate high-density atomic oxygen in the atmospheric pressure plasma. Oxidation rate, structure, and thickness and refractive index profiles of the oxidized layers were investigated by ellipsometry and infrared absorption spectroscopy. Atomic force microscopy was also employed to observe atomic-scale morphologies of the layer surface and wafer Si surface, after chemical removal of the oxidized layers. It was found that stoichiometric SiO₂ layers were obtained at higher oxidation rates than conventional dry O₂ thermal oxidation and radical oxidation processes, even at a very low substrate temperature of 150 °C. Although thickness variations were observed in the plasma region, the refractive index was independent of both substrate temperature and VHF power. In addition, the SiO₂ surface and SiO₂/Si interface roughnesses were comparable to those obtained in conventional dry oxidation at high temperatures.     

Single molecular orientation switching of an endohedral metallofullerene

The single molecular orientation switching of the Tb@C82 endohedral metallofullerene has been studied by using low-temperature ultrahigh vacuum (UHV) scanning tunneling microscopy (STM). An octanethiol self-assembled monolayer (SAM) was introduced between Tb@C82 and the Au111 substrate to control the thermal rotational states of Tb@C82. Scanning tunneling spectroscopy (STS) of Tb@C82 on an octanethiol SAM at 13 K demonstrated hysteresis including negative differential conductance (NDC). This observed hysteresis and NDC is interpreted in terms of a switching of the Tb@C82 molecular orientation caused by the interaction between its electric dipole moment and an external electric field.     

A Single Mutation at the Ferredoxin Binding Site of P450 Vdh Enables Efficient Biocatalytic Production of 25‐Hydroxyvitamin D3

Vitamin D₃ hydroxylase (Vdh) from Pseudonocardia autotrophica is a cytochrome P450 monooxygenase that catalyzes the two‐step hydroxylation of vitamin D₃ (VD₃) to produce 25‐hydroxyvitamin D₃ (25(OH)VD₃) and 1α,25‐dihydroxyvitamin D₃ (1α,25(OH)₂VD₃). These hydroxylated forms of VD₃ are useful as pharmaceuticals for the treatment of conditions associated with VD₃ deficiency and VD₃ metabolic disorder. Herein, we describe the creation of a highly active T107A mutant of Vdh by engineering the putative ferredoxin‐binding site. Crystallographic and kinetic analyses indicate that the T107A mutation results in conformational change from an open to a closed state, thereby increasing the binding affinity with ferredoxin. We also report the efficient biocatalytic synthesis of 25(OH)VD₃, a promising intermediate for the synthesis of various hydroxylated VD₃ derivatives, by using nisin‐treated Rhodococcus erythropolis cells containing Vdh_T107A. The gene‐expression cassette encoding Bacillus megaterium glucose dehydrogenase‐IV was inserted into the R. erythropolis chromosome and expressed to avoid exhaustion of NADH in a cytoplasm during bioconversion. As a result, approximately 573 μg mL^?1 25(OH)VD₃ was successfully produced by a 2 h bioconversion.     

Dual roles of proteasome in the metabolism of presenilin 1

Presenilin 1 (PS1) has been identified as a causative gene for most early-onset familial Alzheimer's disease. Biochemical studies revealed that PS1 exists predominantly as two processed fragments in cells and brain tissues. We prepared stably transfected cells expressing the wild-type and familial Alzheimer's disease-associated mutants of PS1 and investigated the enzyme that participates in the metabolism of PS1. After treatment of the cells with proteasome inhibitors, the full-length PS1 was significantly accumulated. The levels of N- and C-terminal fragments were also increased. The accumulation of PS1 with a deletion of exon 10, which is unable to be processed, on treatment of the transfected cells with lactacystin indicated that proteasome can degrade full-length PS1. A synthetic peptide that includes the processing region of PS1 was cleaved by 20S proteasome at the putative processing sites after Met288 and Glu299. Metabolic labeling experiments showed that the appearance of the N-terminal fragment was attenuated by the inhibitor. Finally, 28-kDa N- and 20-kDa C-terminal fragments were generated by purified PS1 in vitro. These data indicated that the proteasome pathway is involved in PS1 processing. These results demonstrate that the proteasome pathway plays dual roles in processing and degradation of PS1.     

A Trial Thermal Rectifier

We have prepared a trial oxide thermal rectifier made of two cobalt oxides with different thermal conductivities based on a theoretical design. We created an experimental system to measure the thermal rectification and found that the rectifying coefficient defined by the ratio of heat current in a forward direction to that in the opposite direction was 1.43. We verified the thermal rectification by analyzing it quantitatively.     

Formation of high performance ice slurry by W/O emulsion in ice storage (effective method to propagate supercooling dissolution)

This study focused ice slurry formation in an ice storage system using W/O emulsions with 70 and 80% water contents. Emulsions consisted of a silicone oil–water mixture with a small amount of amino-group-modified silicone oil additive. Ice slurry was formed by cooling the emulsion without ice adhesion to the cooling wall, as water in the emulsion did not directly contact the cooling wall. As the structure of W/O emulsion slowed the propagation rate of supercooling dissolution, voltage and ultrasonic wave were applied to the W/O emulsion to propagate dissolution more quickly and decrease maximum supercooling degree, respectively. Thus, the effects of voltage and ultrasonic wave applications on propagation rate were clarified.     

Corrosion Behavior of Sialon Ceramics in Supercritical Water

The corrosion behavior of sialon ceramics was investigated in supercritical water at 450°C under 45 MPa for 2–50 h. α-sialon exhibited better corrosion resistance than β-sialon and α/β-sialon. Pitting corrosion with the formation of corrosion products was observed in the case of β-sialon and α/β-sialon. By contrast, the corrosion behavior of α-sialon was characterized by uniform corrosion with the formation of corrosion products. The degree of strength deterioration was strongly dependent on the corrosion morphology. The bending strength of α-sialon after corrosion for 30 h was about 90% of its initial strength, while the strength of β-sialon decreased to 65% of its original strength.     

Termini and main-chain composition of monomethoxy-terminated poly(ethylene glycol) studied by two-dimensional column chromatography

Samples of poly(ethylene glycol) especially those with functionalized ends have dimeric, trimeric, and tetrameric components at twice, three times, and four times as high a molecular weight (MW) as that of the main component. We used two-dimensional column chromatography to evaluate the MW and identify the terminal groups in each component. The first step is high osmotic pressure chromatography to prepare a sufficient amount of fractions that contain different percentages of the multimeric components. In the second step, each of the fractions was characterized by using regular size exclusion chromatography and high-resolution NMR. Decomposition of the chromatogram combined with isolation of the terminal methoxy peak in the NMR spectrum led to unique identification of the terminal groups. We thus found that the monomeric component is monomethoxy-terminated whereas the dimeric and other multimeric components are mostly dihydroxy-terminated.     

Influence of cocations on catalytic activity of copper ion-exchanged ZSM-5 zeolite for reduction of nitric oxide with ethene in the presence of oxygen

The coexistence of alkaline earth (Ca and Sr) and transition metal (Fe, Co and Ni) cations with Cu ions in ZSM-5 zeolite is effective in the promotion of the maximum activity and the expansion of the active temperature range for the reduction of nitric oxide with ethene in the presence of excess oxygen.