The evaluation of speckle contrast with variable speckle generator

Abstract— While laser projection has many advantages, there is a problem with speckle patterns generated as a result of interference of the laser beam and results in bad effects to observers. In 2010, a variable speckle generator, which produces an angular shift of incident light to the screen and generates variable speckle patterns, was suggested. In this study, the performance of a variable speckle generator by using a volume phase holographic beam shaper and scanning mirror was investigated in detail by evaluating both the objective and subjective speckle contrast. The morphology of the speckle pattern was also investigated when the variable speckle generator was activated. With a scanning VPH beam shaper, the objective speckle was effectively reduced because each point of the VPH beam shaper generated different speckle patterns and coherency among each pattern disappeared by using the scan process. On the other hand, subjective speckle was also dramatically reduced by changing the incident angle on the screen, which resulted in generating variable subjective speckle. It was also shown that the speckle reduction rate by using a variable speckle generator did not depend on the coherent length of a laser by evaluating the normalized speckle contrast against the angular shift on the screen.     

A dynamically reconfigurable processor for H.264/AVC image prediction

H.264/AVC provides high video quality at substantially low bit rates. It is useful for saving and transferring video images by robot cameras. However, the computational complexity of H.264/AVC is very high. A high-speed general-purpose processor is necessary to process H.264/AVC. However, it is difficult to use such a processor for a portable device. Therefore, an application-specific processor is necessary. A dynamic reconfiguration can virtually expand the circuit area in a limited chip area. Therefore, this article proposes a dynamically reconfigurable processor for H.264/AVC image prediction. H.264/AVC contains intra- and inter-prediction processes. The intra- and inter-prediction processes are not used at the same time. The proposed processor was designed and synthesized, and dynamically reconfigures those circuits. As a result, look-up tables (LUTs) were reduced to 93%, flip-flops were reduced to 94%, and the maximum delay was about the same.     

Magnetic probe array with high sensitivity for fluctuating field

A magnetic probe array is constructed to measure precisely the spatial structure of a small fluctuating field included in a strong confinement field that varies with time. To exclude the effect of the confinement field, the magnetic probes consisting of figure-eight-wound coils are prepared. The spatial structure of the fluctuating field is obtained from a Fourier analysis of the probe signal. It is found that the probe array is more sensitive to the fluctuating field with a high mode number than that with a low mode number. An experimental demonstration of the present method is attempted using a field-reversed configuration plasma, where the fluctuating field with 0.1% of the confinement field is successfully detected.     

A genetic approach to the design of autonomous agents for futures trading

We propose a genetic algorithm-based method for designing an autonomous trader agent. The task of the proposed method is to find an optimal set of fuzzy if–then rules that best represents the behavior of a target trader agent. A highly profitable trader agent is used as the target in the proposed genetic algorithm. A trading history for the target agent is obtained from a series of futures trading. The antecedent part of fuzzy if–then rules considers time-series data of spot prices, while the consequent part indicates the order of trade (Buy, Sell, or No action) with its degree of certainty. The proposed method determines the antecedent part of fuzzy if–then rules. The consequent part of fuzzy if–then rules is automatically determined from the trading history of the target trader agent. The autonomous trader agent designed by the proposed genetic algorithm consists of a fixed number of fuzzy if–then rules. The decision of the autonomous trader agent is made by fuzzy inference from the time-series data of spot prices. This work was presented in part at the 11th International Symposium on Artificial Life and Robotics, Oita, Japan, January 23–25, 2006     

Chemical response of Picea glehnii seed-epiphytic Penicillium species to Pythium vexans under in vitro competitive conditions for mycelial growth

The potential protection of Picea glehnii seedlings from damping-off by seed-epiphytic Penicillium species was investigated. We studied the chemical response of seed-epiphytic Penicillium species (Pen. cyaneum, Pen. damascenum, and Pen. implicatum) to Pythium vexans, a damping-off fungus, in vitro. Penicillium species were cultured singly or cocultured with Pyt. vexans for 14 or 18 d, and mycelial growth, pH of culture filtrate, antifungal activity of the culture filtrate against Pyt. vexans, and the amount of antifungal compound produced by each Penicillium species, were examined. The filtrate of both the single culture of Penicillium and the coculture of Penicillium and Pyt. vexans showed antifungal activity against Pyt. vexans. In a coculture with Pyt. vexans, Pen. cyaneum produced an antifungal compound (patulin) as in the single culture. Pen. damascenum cocultured with Pyt. vexans produced an antifungal compound (citrinin), as it did in the single culture and in larger amounts on day 10. Pen. implicatum produced two antifungal compounds, frequentin and palitantin, and the ratio of frequentin (with higher antifungal activity than palitantin) to palitantin was higher in the coculture with Pyt. vexans than in the single culture. Our results indicate that these Penicillium species have the ability to produce antifungal compounds and to keep antifungal activity under competitive condition with Pyt. vexans. The chemical response of these Penicillium species to Pyt. vexans may contribute to protect P. glehnii seedlings from damage by Pyt. vexans.     

Experience with radio isotope myelography from neurosurgical aspects (author's transl)

Experience with Radio Isotope Myelography is reported here. 169Yb-DTPA as a tracer was intrathecally injected at lumbar region in twenty three patients with various spinal cord lesions. The first scanning is perfomed after comfirming by gamma-camera that the tracer reaches to the lesion, the second and the third scannings are done according to the ascending rate of the tracer. (I) Normal scintimyelogram (A) In normal case, the shape of the Radio Isotope Myelogram well corresponds the shape of anatomical subarachnoid space. (B) In normal adult cases, the tracer comes up to the cisterna magna in 20-25 minutes after the lumbar injection. Therefore, the scintimyelographic diagnosis should be made not only by the shape but also by the ascending rapidity of the tracer. (II) Abnormal scintimyelogram Abnormal scintimyelograms could be summarized as following three categories. (A) "Delay": It means delay of the ascending of the tracer. Besides, "Transient delay" found in a case of Arnord-Chiari's malformation was proposed. (B) "Partial block": It meas a defect at the level of the lesion. This "Partial block" were observed in cases of spinal cord angioma, cervical spondylosis and spinal cord tumor etc. (C) "Complete block": It means the stagnation of the tracer below the lesion. To sum up, Rario Isotope Myelography, especially in partial block, can more easily and more sensitively represent the maximum extent of the spinal cord lesion than other myelographic study or angiographic one. On the other hand, we can not qualitatively diagnose about the lesions by its indistinct border.     

Texture evolution during hot-rolling and recrystallization in B2-type FeAl, NiAl and CoTi intermetallic compounds

The texture evolution during the hot-rolling and the recrystallization of B2-type Fe–48Al, Ni–50Al and Co–50Ti (expressed by at.%) intermetallic compounds were investigated. By hot-rolling at 973 K, Fe–48Al showed a microstructure with coarse grains elongated along rolling direction, while Ni–50Al and Co–50Ti showed a deformed microstructure featured by the heavily distorted (elongated) grains and/or the deformation bands. The hot-rolling texture of Fe–48Al was composed of {111}<uvw>, while those of Ni–50Al and Co–50Ti were composed of {111}<110> and {111}<112>, respectively. After annealing, the recrystallized grains were preferentially nucleated at the grain boundaries for Fe–48Al, and in the heavily distorted regions or the deformation bands for Ni–50Al and Co–50Ti. The orientations of the recrystallized grains were similar with those of the deformed matrix, especially for Ni–50Al and Co–50Ti. The recrystallization textures were generally more dispersive than the hot-rolling texture. Based on these results, the texture evolution during the hot rolling and the recrystallization of the B2-type intermetallic compounds were discussed.     

气体辅助法陶瓷薄膜的制备

Ceramics （alumina） coating on sevaral materials has been successfully achieved at room temperature by gas - assisted deposition （ GAD） technique. In the GAD process the alumina powder was accelerated by jet flow with velocity of - 1000 m/s and impaeted to a substrate, thereby a fiat and dense film was deposited up to 10 μm on the substrate without arty additional heating. The crystal structttre of the alumina in an obtained GAD films seemed as amorphous like. The crystalline phase was recovered by post nnnenling at 1 300 ℃ , however, the matrix resulted in a hollow structure.     

Effect of gravity on InGaSb crystal growth

The effect of gravity on dissolution of GaSb in InSb melt and growth of InGaSb was experimentally investigated. Experiments were carried out in a GaSb(seed)/InSb/GaSb(feed) sandwich system under an imposed temperature gradient. In the experiments, the GaSb feed crystal dissolved into the InSb melt to supply the required GaSb component for the growth of In_0.1Ga_0.9Sb crystal. Two parameters were considered: (1) the inclination angle (θ) of the sample for gravity as 0° and 53°, and (2) the sample diameter (D) as 9 mm and 5mm. When θ was 0°, the interface was almost flat, indicating that convection was axisymmetric and stable. Whereas the interface was distorted towards gravitational direction when θ was 53°, indicating that solutal convection was dominant. The decrease of growth temperature and sample diameter reduced the distortion of interface and the dissolution amount of GaSb feed. The homogeneous crystals were grown at the initial growth stage by supplying the GaSb component during growth.