Texture,sensory and swallowing characteristics of high-pressure-heat-treated pork meat gel as a dysphagia diet

To develop a soft meat product for a dysphagia diet, high-pressure technology was applied. Pressure-heat-treated ground pork meat (PH) was prepared from ground pork mixed with water (ground meat: water, 1:0.5 or 1:1) and salt (1.5%). PH-gels were made from these meat homogenates by treatment at 400 MPa for 20 min, followed by heat treatment. Heat-treated pork meat homogenates (H) were also prepared. The hardness and adhesiveness of the 1:1PH-gel was lower than those of the 1:1H-gel. The PH-gel scored higher in sensory evaluations of elasticity, smoothness and ease of swallowing. Scanning electron micrographs indicated that the superior textural property of the 1:1PH-gel was caused by a network of myosin filaments. Videofluoroscopic examination of swallowing revealed that the 1:1PH-gel was easy to swallow and left little residue in the oropharynx. These results proved the utility of pressurization in creating a dysphagia meat diet.     

Study on performance and flow field of an undershot cross-flow water turbine comprising different number of blades

Recently,small hydroelectric generators have gained attention as a further development in water turbine technology for ultra low head drops in open channels.The authors have evaluated the application of cross-flow water turbines in open channels as an undershot type after removing the casings and guide vanes to substantially simplify these water turbines.However,because undershot cross-flow water turbines are designed on the basis of cross-flow water turbine runners used in typical pipelines,it remains unclear whether the number of blades has an effect on the performance or flow fields.Thus,in this research,experiments and numerical analyses are employed to study the performance and flow fields of undershot cross-flow water turbines with varying number of blades.The findings show that the turbine output and torque are lower,the fluctuation is significantly higher,and the turbine efficiency is higher for runners with 8 blades as opposed to those with 24 blades.     

Immunomodulatory Properties and Osteogenic Activity of Polyetheretherketone Coated with Titanate Nanonetwork Structures

Polyetheretherketone (PEEK) is a potential substitute for conventional metallic biomedical implants owing to its superior mechanical and chemical properties, as well as biocompatibility. However, its inherent bio-inertness and poor osseointegration limit its use in clinical applications. Herein, thin titanium films were deposited on the PEEK substrate by plasma sputtering, and porous nanonetwork structures were incorporated on the PEEK surface by alkali treatment (PEEK-TNS). Changes in the physical and chemical characteristics of the PEEK surface were analyzed to establish the interactions with cell behaviors. The osteoimmunomodulatory properties were evaluated using macrophage cells and osteoblast lineage cells. The functionalized nanostructured surface of PEEK-TNS effectively promoted initial cell adhesion and proliferation, suppressed inflammatory responses, and induced macrophages to anti-inflammatory M2 polarization. Compared with PEEK, PEEK-TNS provided a more beneficial osteoimmune environment, including increased levels of osteogenic, angiogenic, and fibrogenic gene expression, and balanced osteoclast activities. Furthermore, the crosstalk between macrophages and osteoblast cells showed that PEEK-TNS could provide favorable osteoimmunodulatory environment for bone regeneration. PEEK-TNS exhibited high osteogenic activity, as indicated by alkaline phosphatase activity, osteogenic factor production, and the osteogenesis/osteoclastogenesis-related gene expression of osteoblasts. The study establishes that the fabrication of titanate nanonetwork structures on PEEK surfaces could extract an adequate immune response and favorable osteogenesis for functional bone regeneration. Furthermore, it indicates the potential of PEEK-TNS in implant applications.     

Predator Avoidance by Phytophagous Mites is Affected by the Presence of Herbivores in a Neighboring Patch

When predators invade a leaf patch inhabited by herbivores, the herbivores disperse to a neighboring predator-free leaf patch, thus escaping from the predators. However, the neighboring patch might already be used by con- or heterospecific herbivores. We used laboratory bioassays to examine whether perception of odor from con- or heterospecific competitors on a neighbored lima bean leaf patch influences dispersal behavior of the herbivorous mite Tetranychus urticae when attacked by predatory mites Phytoseiulus persimilis. The dispersal rates of T. urticae that perceived odors from leaf patches infested by conspecifics or cowpea aphids (Aphis craccivora) did not differ from the control (the dispersal rate of T. urticae that perceived odor from uninfested leaf patches). By contrast, the dispersal rate of T. urticae was reduced when they perceived odors from leaf patches that were currently or had previously been infested by larvae of the common cutworm (Spodoptera litura). Previous herbivory by S. litura larvae induced resistance in leaf patches to T. urticae as indicated by the reduced number of eggs laid by T. urticae. Our results are discussed with respect to the feeding behavior of the tested competitors of T. urticae and the impact of the plant and arthropod community on the dispersal behavior of these mites.     

Applications of microstructures fabricated by proton beam writing to electric-micro filters

Fabrication of high-aspect-ratio microstructures was performed by proton beam writing (PBW) using a microbeam line at Takasaki Ion Accelerators for Advanced Radiation Application (TIARA), JAEA Takasaki, JAPAN. As one of the applications of the high-aspect-ratio structures micro-machined by PBW, we utilized the high-aspect pillars for electric-micro filters of microbes such as Escherichia coli and Yeast based on the dielectrophoretic force. The filter is equipped with high-aspect pillars with a height of ～20 μm and a diameter of ～1 μm on a glass plate. Evaluation of the dielectrophoresis (DEP) device for capturing E. coli and Yeast was made using either observation by optical microscope or photoluminescence (PL) measurements.     

Three-dimensional simulating of concentrator photovoltaic modules using ray trace and equivalent circuit simulators

A 3-dimensional (3D) simulation for a concentrator photovoltaic (CPV) module using a triple-junction solar cell was developed. By connecting ray-trace simulation for an optics model and 3D equivalent circuit simulation for a triple-junction solar cell, the operating characteristics of a CPV module were calculated. By using the 3D simulation, we considered the influence of tracking error on the CPV module. It was found that maximum output power was not correlated with optical efficiency of the optics system and was strongly dependent on fill factor. We can use this total 3D simulation for the evaluation and optimization of CPV modules.     

TRANSPORT PROPERTIES OF CELLULAR FOOD MATERIALS UNDERGOING FREEZE-DRYING

The samples of sliced and mashed apples were freeze-dried by controlling their surface temperatures over the usual pressure range of commercial operations. The surface of sliced samples could not be maintained at above 10°C in order to prevent the frozen layer from melting, while that of mashed samples was allowed to heat up to 70°C.

Thermal conductivities and permeabilities were determined by applying the uniformly-retreating-ice front model to the dried layer of the samples undergoing freeze-drying. The values of permeability for the mashed samples were found to depend on the ice-crystallization time during freezing. The results indicated that the drying rate of sliced samples was limited by the transfer rate of water vapor flowing through the dried layer. A cellular structural model is proposed for predicting the permeability of the dried layer, based on the resistance of the cell membrane to molecular transfer of water vapor.     

Wireless Body Area Network Combined with Satellite Communication for Remote Medical and Healthcare Applications

Wireless Body Area Network (WBAN) is expected to play an important role in supporting medical and healthcare services with increased convenience and comfort. One main advantage of WBAN is that it enables automatic biosignal collection in real time which is essential in medical treatment and healthcare vigilance. To harmonize with the strong demands from both medical and healthcare societies, and information and communications technology industries, IEEE 802 Standard Committee set up a task group of TG15.6 to develop an IEEE wireless standard on WBAN. In this paper, we first review the main activities of TG15.6 with the updated status. Then, we present a prototype WBAN system that is implemented by using ultra-wideband technology. Multi-hop mechanism is adopted to guarantee reliable connection. Finally, we describe an experimental system that uses the developed WBAN system by combining with satellite communication in supporting remote medical treatment and healthcare. In case of less of medical resources such as in emergency, in rural or isolated areas, such a system is important in sending the corresponding biosignal to a remote hospital in real time to help patient management. The relative delay of WBAN data delivery via satellite is measured which is dependent on the satellite link capacity.     

Measurement of mean free paths for inelastic electron scattering of Si and SiO2

The effects of accelerating voltage and collection angle on the mean free path for all inelastic electron scattering (lambdap), which is an important parameter for determining specimen thickness by using electron energy-loss spectroscopy, were investigated with crystalline Si and amorphous SiO2. First, thickness of Si film was measured with the convergent-beam electron diffraction method, while thickness of SiO2 particles was estimated from their spherical shape. Then from electron energy-loss spectra, lambdap was evaluated for Si film and SiO2 particles by changing the accelerating voltage (100 to approximately 300 kV) and the collection angle for the scattered electrons. Under the condition of no objective aperture, lambdap for Si film and SiO2 particles was found to increase with the increase of accelerating voltage and to take values of 180+/-6 nm (Si) and 247+/-8 nm (SiO2) at 300 kV. Also, it was found that lambdap in both cases decreases drastically with the increase of collection angle in the range smaller than 25 mrad, while it tends to take a constant value at the collection angle larger than 25 mrad at 200 kV.