Texture evolution during hot-rolling and recrystallization in B2-type FeAl, NiAl and CoTi intermetallic compounds

The texture evolution during the hot-rolling and the recrystallization of B2-type Fe–48Al, Ni–50Al and Co–50Ti (expressed by at.%) intermetallic compounds were investigated. By hot-rolling at 973 K, Fe–48Al showed a microstructure with coarse grains elongated along rolling direction, while Ni–50Al and Co–50Ti showed a deformed microstructure featured by the heavily distorted (elongated) grains and/or the deformation bands. The hot-rolling texture of Fe–48Al was composed of {111}<uvw>, while those of Ni–50Al and Co–50Ti were composed of {111}<110> and {111}<112>, respectively. After annealing, the recrystallized grains were preferentially nucleated at the grain boundaries for Fe–48Al, and in the heavily distorted regions or the deformation bands for Ni–50Al and Co–50Ti. The orientations of the recrystallized grains were similar with those of the deformed matrix, especially for Ni–50Al and Co–50Ti. The recrystallization textures were generally more dispersive than the hot-rolling texture. Based on these results, the texture evolution during the hot rolling and the recrystallization of the B2-type intermetallic compounds were discussed.     

Small increase of CR1 and CR3 by C5a-receptors on polymorphonuclear leukocytes in systemic lupus erythematosus

One of the anaphylatoxins, C5a, is known to increase the expression of the complement receptors, CR1 and CR3, on PMNs which play important roles in the phagocytosis. We measured the expression of these receptors before and after the stimulation with C5a and C5a-receptors (C5aR) on PMNs in patients with systemic lupus erythematosus (SLE). PMNs from 16 patients and 11 normal controls were tested. All the patients with SLE were administered with prednisolone orally and were in the inactive stage. The CR1 expression in SLE was significantly weak (p < 0.01) before and after stimulation with 4.55 nM (50 micrograms/ml) of C5a. There was no significant difference of CR3 expression before stimulation. However, after the stimulation with C5a, the increase of CR3 on PMNs from SLE was significantly small (p < 0.01). C5aR on PMNs showed no difference between the two groups. However, the expression of C5aR was significantly suppressed in patients treated with a high dosage of prednisolone (> = 10 mg/day) compared to those with a low dosage of prednisolone (< 10 mg/day). There was no significant difference of CR1 and CR3 expression between these groups. It is concluded that the increase of CR1 and CR3 on PMNs by C5a in small in SLE, of which impaired increase is not due to C5aR on PMNs, and that the expression of C5aR is suppressed by prednisolone.     

Miscibility between natural rubber and tackifiers. II. Phase diagrams of the blends of natural rubber and petroleum resins

Natural rubber (NR) was blended in various ratios with 12 kinds of tackifiers that were prepared from petroleum. The blends were heated to various temperatures (20–120°C) to investigate their miscibility. The blends were visually observed for transparency or opacity at each temperature and further observed under an optical microscope for any existence of phase-separated structure. Miscibility of the blends is illustrated as phase diagrams in this article. NR/aliphatic resin systems and NR/aliphatic-aromatic copolymer systems showed phase diagrams of the lower critical solution temperature type, wherein the blends turned faintly cloudy over the binodal curves. The NR/hydrogenated petroleum resin system also showed a phase diagram of the lower critical solution temperature type. The miscible range of a blend system tends to become smaller as the molecular weight of a tackifier increases. Resins prepared by polymerization of pure aromatic monomers were completely immiscible with NR. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 67: 221–229, 1998     

A reduction method of dynamic false contour utilizing the frame‐rate‐control method with suppression of the side effect on PDPs

Abstract— The plasma‐display panel (PDP) is a type of flat‐panel display that can display a high‐quality image. However, when moving images are displayed, annoying disturbances such as false contour noise occurs. This noise is called dynamic false contour (DFC). To achieve a higher‐quality image, DFC has to be reduced. Therefore, a new method to reduce DFC is proposed. To find a way to reduce DFC, a new evaluation value for it has been defined: the evaluation value of dynamic false contour (EVDFC). This value is defined on the basis of a person's subjective evaluation. By applying this value, the cause that generates DFC can be identified. On the basis of these studies, a new method for reducing DFC by applying frame‐rate control (FRC) with suppression of the side effect is proposed. This improved method can be used to provide high‐quality images.     

Evolutionary design of dynamic neural networks for evaporator control

This paper presents a novel neural network (NN) to control an ammonia refrigerant evaporator. Inspired by the latest findings on the biological neuron, a dynamic synaptic unit (DSU) is proposed to enhance the information processing capacity of artificial neurons. Treating the dynamic synaptic activity after the nonlinear somatic activity helps to capture the dynamics demarcated by the Gaussian activation pertaining to the input space. This practice leads to a remarkable reduction in curse of dimensionality. The proposed NN architecture has been compared with two other conventional architectures; one with dynamic neural units (DNUs) and the other with nonlinear static functions as perceptrons. The objective is to control evaporator heat flow rate and secondary fluid outlet temperature while keeping the degree of refrigerant superheat in the range 4–7 K at the evaporator outlet by manipulating refrigerant and evaporator secondary fluid flow rates. The drawbacks of conventional approaches to this problem are discussed, and how the novel method can overcome them are presented. An evolutionary approach is adopted to optimize the parameters of the NN controllers. Then evaporator process model is accomplished as a combination of governing equations and a sub NN resulting in a simple and sufficiently accurate model. The effectiveness of the proposed dynamic NN controller for the evaporator system model is validated using experimental data from the ammonia refrigeration plant.     

Metal-Induced Structural Switching of a Folded Quinone-Sandwiched Porphyrin

We report the synthesis of a novel quinone-sandwiched porphyrin in which two benzoquinones are connected oppositely at the meso positions of a porphyrin through rigid 3-amido 2,2′-bipyridine linkers. ¹H-NMR and single crystal X-ray analyses revealed that the quinone-sandwiched porphyrin has a folded structure in which the porphyrin unit was inserted into the two quinone moieties via π-stacking. Insertion of a Zn(II) ion into the porphyrin center induced a drastic conformational change which is resulted in coordination of the oxygen atoms of both benzoquinone moieties to the Zn-porphyrin to afford a 6-coordinated structure.     

Novel Structures for Porous Silicon Light-Emitting Diodes

In this paper, two novel structures of porous silicon (PS) light-emitting diodes (LEDs) are proposed aiming at the reduction of series resistance, R_s. The basic idea of the novel structures is to suppress the excessive growth of nanoporous silicon (nano-PS) layer that is electroluminescence- (EL-) active but highly resistive. The initial wafer of the first structure consists of a lightly-doped layer stacked on a highly-doped substrate. As a consequence of anodization, nano-PS layer is formed only in the lightly-doped layer, while meso-PS layer with moderate resistivity is formed in the highly-doped substrate. The second structure consists of alternately stacked nano- and meso-PS layers, since it is expected that multiple thin nano-PS layers connected in series are less resistive than a single thick nano-PS layer. Preliminary experimental results proved the effectiveness of these novel structures on the reduction of R_s.     

Contact force detection on a minute aperture mounted optical contact slider using an acoustic emission sensor

Advances in the digital network society require both higher density and higher transfer rates in all sorts of storage systems. Especially in optical recording, the trend toward higher density and larger capacity requires novel surface-recording technologies that can drastically diminish head-to-medium spacing, resulting in an improvement in spatial resolution and, finally, a higher recording density. To this end, we have already proposed a novel contact optical head slider that is able to almost cancel the suspension load by generating hydrodynamic pressure, thus realizing a lower net contact force. Evaluating the dynamic contact force is requisite in realizing its stable sliding operation and higher signal readout performance. In this study, a continuous acoustic emission (AE) signal was utilized to detect the dynamic contact force. AE signal modulation was compared with the applied out-of-plane acceleration on a medium generated by a spindle combined piezo-electric actuator. It was clarified that the detected AE modulation amplitude was approximately proportional to the applied acceleration, and that utilizing AE modulation will be a useful method for evaluating dynamic contact force.     

CHAOTIC BEHAVIOR AND TRANSITION TO TURBULENCE IN POROUS MEDIA

An experimental study has been made of the chaotic behavior in the transition to turbulence of flow through porous media consisting of a bank of tubes in a narrow gap. Judging from the examination of the correlation dimension and the maximum Lyapunov exponents, we can identify the chaotic behavior in porous media for Re > ～60. Rapid increase in the maximum Lyapunov exponents was observed for Re > ～300. Also, the spatial distribution of the Lyapunov exponents is discussed.     

Highly elongated,low‐aspect‐ratio tokamak produced by negative‐biased theta pinch

Ultra Low Aspect Ratio Tokamaks (ULART) are produced by using a negative‐biased theta‐pinch device. A slender conducting rod which serves as a toroidal field coil is newly installed along a geometrical center axis of the theta‐pinch coil. The ULART is quickly formed for about 10 μs by applying programmed current flows from three sets of fast banks and a slow bank to these coils and is sustained for about 100 μs. The plasma diagnosed from a magnetic probe array has a low aspect ratio A = 1.1 and a poloidal surface with a high elongation ratio κ = 10. The safety factor reaches about 30 near the separatrix edge when I_p = 280 kA flows in the plasma and I_tfc = 30 kA in the conducting rod. A preliminary result on global MHD characteristics of the ULART is also given. The plasma is unstable with respect to a vertical displacement and a toroidal n = 1 mode. The amplitudes of these modes depend on the values of I_tfc and κ. © 2001 Scripta Technica, Electr Eng Jpn, 134(4): 19–27, 2001