Effects of ternary additions on the thermoelastic martensitic transformation of NiAl

Nickel-rich β-NiAl alloys, which are potential materials for high-temperature shape-memory alloys, show a thermoelastic martensitic transformation, which produces their shape memory effect. However, the transformation to Ni₅Al₃ phase during heating of NiAl martensite can interrupt the reversible martensitic transformation; consequently, the shape memory effect in NiAl martensite might not appear after heating. The phase transformation process in binary Ni-(34 to 37)Al martensite was investigated by differential thermal analysis (DTA) method, and we found that the condition of reversible martensitic transformation was not the β → Ni₅Al₃ transformation, but rather the M → Ni₅Al₃ transformation occurring at 250 °C to 300 °C. Therefore, the transformation temperature of M → Ni₅Al₃ determined the highest operating temperature for the shape memory effect. For verifying the critical temperature, the phase transformation process was investigated for eight ternary Ni-33Al-X alloys (X=Cu, Co, Fe, Mn, Cr, Ti, Si, and Nb). Only Ti, Si, and Nb additions were found to be effective in dropping the M _s temperature, and they facilitated the shape memory effect in Ni-33Al-X alloys. In particular, the addition of Si and Nb raised the transformation temperature of M → Ni₅Al₃, a potentially beneficial effect for shape memory at higher temperatures. This article is based on a presentation made in the symposium entitled “Fundamentals of Structural Intermetallics,” presented at the 2002 TMS Annual Meeting, February 21–27, 2002, in Seattle, Washington, under the auspices of the ASM and TMS Joint Committee on Mechanical Behavior of Materials.     

One Hundred Years of Social Psychology Quantitatively Described.

This article compiles results from a century of social psychological research, more than 25,000 studies of 8 million people. A large number of social psychological conclusions are listed alongside meta-analytic information about the magnitude and variability of the corresponding effects. References to 322 meta-analyses of social psychological phenomena are presented, as well as statistical effect-size summaries. Analyses reveal that social psychological effects typically yield a value of r equal to .21 and that, in the typical research literature, effects vary from study to study in ways that produce a standard deviation in r of .15. Uses, limitations, and implications of this large-scale compilation are noted. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Competitiveness of Inexperienced and Experienced Contractors in Bidding

This paper tests the assertion that experienced contractors are more competitive than inexperienced contractors by measuring the effect of experience on bidding competitiveness for building contracts procured by a regular client. Contractors are grouped into experienced and inexperienced contractors, and two levels of contractors’ experience are identified: (1) bidding experience only and (2) bidding plus construction experience. Results of two-sample t tests show that experienced contractors are more competitive than inexperienced contractors. Contractors’ competitiveness in respect of school contracts and other contracts are further compared in evaluating the relationship between the project type and experience effect. Experienced contractors are, on average, more competitive in competing for school contracts. It emerges that the factor of project type familiarity amplifies the experience effect. A comparison of experienced contractors’ competitiveness in bidding for (1) new building works and (2) alteration and extension works shows that the effect of experience would be more significant when contract works packages are highly standardized.     

Effect of prior oxidation on the creep behavior of NiAl-hardened austenitic steel

The effect of prior oxidation at 1473 K on the creep behavior of an Fe-Ni-Cr-Al alloy, hardened by ordered NiAl precipitates, has been investigated at 873 K over a stress range of 275 to 450 MPa. The alloy in the as-electroslag remelted (ESR) as well as the ESR-plus-hot-worked conditions was considered. Prior oxidation causes creep strengthening in the Fe-Ni-Cr-Al alloy, resulting in a decrease in minimum creep rate and increase in time to rupture, in contrast to the observations reported on nickel-based superalloys. Creep strengthening is, however, accompanied by a significant reduction in creep ductility. Oxidation-induced creep strengthening in the current alloy can be attributed to the improved adherence of surface oxide caused by the presence of yttrium. An effective stress that incorporates the contributions of load transfer as well as substructural strengthening is used to account for the observed oxidation-induced creep strengthening. While creep strengthening is more pronounced in the ESR cast alloy, the loss in creep ductility is more intense in the ESR wrought alloy. Increasing the oxidation time beyond 1 hour has a minimal effect on creep strengthening of both the alloys, though it lowers significantly the creep ductility of the wrought alloy. The observed differences in creep behavior of the alloy in the two different conditions could be attributed to the differences in grain size as well as morphology and related oxidation-induced damage.     

Static and Dynamic Spins in Superconducting La2−x Sr x CuO4: The Risø Years

One important area of modern condensed matter research is the investigation of the nature of the superconducting cuprates. Much progress in this field has been obtained with the technique of neutron scattering. We here present a review of neutron scattering studies of the high-temperature superconductor La_2?xSr_xCuO₄, performed at Risø National Laboratory. We review the work on the mapping of the incommensurate spin fluctuations, the investigation of the gap in the fluctuation spectrum, the magnetic properties of the vortices appearing in an applied field, and the quantum critical behaviour of the system. We discuss our findings in the light of results of neutron scattering from other groups, on other cuprate systems, and results from other experimental methods, e.g. NMR, μSR, STM, X-ray diffraction, and ARPES. We end with a discussion on the implications of the experimental results for the progress in the general understanding of high-temperature superconductivity. PACS numbers: 61.12.Ex, 74.20.Mn, 74.72.Dn, 75.25.+z, 78.70.Nx.     

Single-Threaded vs. Multithreaded: Where Should We Focus?

Today, with the increasing popularity of multicore processors, one approach to optimizing the processor's performance is to reduce the execution times of individual applications running on each core by designing and implementing more powerful cores. Another approach, which is the polar opposite of the first, optimizes the processor's performance by running a larger number of applications on a correspondingly larger number of cores, albeit simpler ones. The difference between these two approaches is that the former focuses on reducing the latency of individual applications or threads (it optimizes the processor's single-threaded performance), whereas the latter focuses on reducing the latency of the applications' threads taken as a group (it optimizes the processor's multithreaded performance). The panel, from the 2007 Workshop on Computer Architecture Research Directions, discusses the relevant issues.     

Time stepping schemes for coupled displacement and pore pressurē analysis

 The paper investigates the performance of various time stepping schemes for coupled displacement and pore pressure analysis. A number of alternative forms of the automatic time stepping method proposed by Sloan and Abbo (1999a) are also presented. These alternative schemes use different updates for the displacements and pore pressures and also adopt different starting conditions for the iterations. The automatic schemes are compared with an implicit θ-method, as well as an explicit method, through analysis of a variety of problems involving undrained loading, drained loading, and consolidation for Mohr-Coulomb and critical state models. As expected, the numerical results confirm that the explicit scheme is neither accurate nor robust. Although the implicit θ-method is accurate and fast, it fails to give a solution in a number of cases where the time step is large. The automatic schemes are shown to be accurate, fast and generally robust. Two of the automatic schemes proposed never fail to furnish a solution for the cases considered. In addition, all the automatic schemes are able to constrain the time-stepping (temporal integration) error in the displacements and pore pressures to lie near a prescribed tolerance, provided the iteration error tolerance is properly chosen. For complex soil models, it is important that the latter is set sufficiently small in order for the schemes to be able to constrain the time-stepping error to lie within a prescribed tolerance. Dedicated to the memory of Prof. Mike Crisfield, for his cheerfulness and cooperation as a colleague and friend over many years.     

Sensitivity analysis of simulations for magnetic particle inspection using the finite-element method

Magnetic particle inspection (MPI) is widely used for nondestructive evaluation in aerospace applications in which interpretation of inspection results is currently limited to empirical knowledge and experience-based approaches. Advances in computational magnetics, particularly the use of finite-element calculations, have enabled realistic numerical simulations of magnetic particle inspection to be undertaken with complicated geometries. In this paper, we report a sensitivity analysis using finite-element-method simulations of magnetic particle inspection for defects with various sizes and geometries. As a result, improved quantitative understanding of the MPI technique and factors that affects its sensitivity and reliability has been achieved. These results can be used to optimize conditions for conducting these inspections and should lead to improvement in analysis and interpretation of experimental results.     

A mechanistic analysis of the correlation between overall strength and indentation hardness in discontinuously reinforced aluminum

It is well established that the indentation hardness of metallic alloys shows a reasonable correlation with their yield strength or ultimate strength. Experiments illustrate that such a unique correlation is nonexistent for discontinuously reinforced metal matrix composites, even when the indentation size is much greater than the reinforcement size. For aluminum alloys reinforced with silicon carbide particles, the same composite yield strength and tensile strength with different reinforcement fractions do not lead to similar hardness, or vice versa. Finite element analyses are carried out to rationalize the experimental findings. The modeling utilizes a two-dimensional plane-strain formulation. Discrete particles are included in the material model, and the overall stress-strain response and the indentation response are numerically simulated. The results confirm the lack of unique correspondence between the composite hardness and strength. The alteration of local heterogeneity in the composite is found to affect the indentation response. Effects of the geometrical arrangement of particles and thermal residual stresses on the indentation response are also investigated numerically.     

Sensor technologies for monitoring metabolic activity in single cells-part I: optical methods

A review of optical, chemical, and biological sensors to detect metabolic activity at the single-cell level is presented in the context of the development of lab-on-a-chip research instrumentation. The sensors reviewed include optical sensors, at both research and commercial levels, that can optically detect intracellular metabolites including adenosine triphosphate, nicotinamide-adenine dinucleotide, reduced flavin adenine dinucleotide, and other metabolites, including oxygen, carbon dioxide, and glucose. Methods to optically detect pH changes which are a general indicator of activity in extracellular space are also briefly reviewed. Performance metrics such as sensitivity, sensor size, drift, time response, and sensing range are included when available. Highly suitable optical sensor technologies for monitoring cellular metabolic activity include luminescent (fluorescent, phosphorescent, and chemiluminescent) and colorimetric optical probes. Different approaches to extracting luminescent and colorimetric information are reviewed, including benchtop techniques, fiber-optic approaches, and the use of probes encapsulated by biologically localized embedding. A brief discussion of alternate optical sensor technologies, such as surface plasmon resonance and infrared absorption spectroscopy, is also presented.