Moving‐picture response time (MPRT) of LCDs for the oblique viewing direction

Abstract— The dynamic performance of displays is an important characteristic for multimedia applications. Motion‐picture response time (MPRT) has been used as an indicator of the dynamic performance of LCDs. This paper describes a comprehensive method of MPRT evaluation for the oblique viewing direction. By using a tilted camera configuration, the angular dependency of MPRT is investigated for the condition that the horizontally scrolling patterns are observed from the vertical direction. For each gray‐to‐gray transition, distinct changes in MPRT and the luminance profile of blur are observed.     

Thin‐film barriers using transparent conducting oxides for organic light‐emitting diodes

Abstract— This study covers thin‐film barriers using inorganic barriers of transparent conducting oxides (TCOs) such as zinc oxide (ZnO) and indium tin oxide (ITO). The TCOs were fabricated using a sputtering method with a process gas of pure argon at room temperature. ITO showed better properties as a barrier than the ZnO and exhibited the electronic performance necessary to perform additional functions. The ITO has superior barrier performance because it has a lower crack density due to its partial amorphous phase. For organic/inorganic multilayer barriers, the organic underlayer decreased the water‐vapor transmission rate (WVTR) more than the organic upper layer, indicating that the planarization effect was important in reducing the WVTRs. The results of this organic/ITO multilayer barrier study are expected to be useful in finding a practical solution to OLED encapsulation.     

ICCD: Interactive Continuous Collision Detection between Deformable Models Using Connectivity-Based Culling

We present an interactive algorithm for continuous collision detection between deformable models. We introduce multiple techniques to improve the culling efficiency and the overall performance of continuous collision detection. First, we present a novel formulation for continuous normal cones and use these normal cones to efficiently cull large regions of the mesh as part of self-collision tests. Second, we introduce the concept of “procedural representative triangles” to remove all redundant elementary tests between nonadjacent triangles. Finally, we exploit the mesh connectivity and introduce the concept of “orphan sets” to eliminate redundant elementary tests between adjacent triangle primitives. In practice, we can reduce the number of elementary tests by two orders of magnitude. These culling techniques have been combined with bounding volume hierarchies and can result in one order of magnitude performance improvement as compared to prior collision detection algorithms for deformable models. We highlight the performance of our algorithm on several benchmarks, including cloth simulations, N-body simulations, and breaking objects.     

Effect of interlayer on structure and performance of anode-supported SOFC single cells

To lower the operating temperatures in solid oxide fuel cell (SOFC) operations, anode-supported SOFC single cells with a single dip-coated interlayer were fabricated and the effect of the interlayer on the electrolyte structure and the electrical performance was investigated. For the preparation of SOFC single cells, yttria-stabilized zirconia (YSZ) electrolyte, NiO-YSZ anode, and 50% YSZ-50% strontium-doped lanthanum manganite (LSM) cathode were used. In order to characterize the cells, scanning electron microscopy (SEM) and atomic force microscopy (AFM) were utilized and the gas (air) permeability measurements were conducted for gas tightness estimation. When the interlayer was inserted onto NiO-YSZ anode, the surface roughness of anode was diminished by about 40% and dense crack-free electrolytes were obtained. The electrical performance was enhanced remarkably and the maximum power density was 0.57W/cm(2) at 800 degrees C and 0.44W/cm(2) at 700 degrees C. On the other hand, the effect of interlayer on the gas tightness was negligible. The characterization study revealed that the enhancement in the electrical performance was mainly attributed to the increase of ion transmission area of anode/electrolyte interface and the increase of ionic conductivity of dense crack-free electrolyte layer.     

Characterization of magnetic materials using a scanning microwave microprobe

We investigated the electromagnetic properties of metals of iron, nickel, cobalt, aluminum, gold, copper, silver, and permalloy thin films on SiO(2) substrates using a near-field microwave microprobe. The electromagnetic properties of metal sheets were estimated by measuring the microwave reflection coefficient S(11) and compared with the theoretical values. We observed the hysteresis behavior of permalloy thin films on SiO(2) substrates using a near-field scanning microwave microprobes (NSMM) system. Experimental results are in good agreement with the theoretical model of transmission theory. In order to better characterize the electromagnetic properties of metals and magnetic metals instead of the usual method, we take advantage of the noncontact microprobing evaluation capabilities using a near-field microwave.     

Some observations from interrupted lifetest of GaInAsP/InP inverted-rib laser diodes

Conventionally, lifetests of semiconductor laser diodes usually involved operating the devices continuously at either constant power output or drive current, with periodic recording of their characteristics. In this paper, some effects arising from interrupted lifetest of 1.3 m GaInAsP-InP inverted-rib laser diodes are reported. This unconventional lifetest method involves constant power biasing at 4 mW/facet and 8 mW/facet respectively at 50°C, followed by a period during which the lifetest is interrupted and the devices left unbiased at room temperature. Subsequently, the devices were put back on constant power biasing at 50°C. Among a number of parameters, pronounced reduction in the threshold current, current for 4 mW/facet and 8 mW/facet were observed, indicating strong recovery effects commencing from the time when the life-test was interrupted. Redistribution of mobile defects in the cladding layer is postulated to be the cause of the degradation recovery, and the data supports the occurrence of an aging-current dependent defect annihilation mechanism. Such recovery effects have so far been observed to occur only in the GaInAsP-InP inverted-rib devices.     

Analysis of issues in gate recess etching in the InAlAs/InGaAs HEMT manufacturing process

We have developed an InAlAs/InGaAs metamorphic high electron mobility transistor device fabrication process where the gate length can be tuned within the range of 0.13 μm–0.16 μm to suit the intended application. The core processes are a two-step electron-beam lithography process using a three-layer resist and gate recess etching process using citric acid. An electron-beam lithography process was developed to fabricate a T-shaped gate electrode with a fine gate foot and a relatively large gate head. This was realized through the use of three-layered resist and two-step electron beam exposure and development. Citric acid-based gate recess etching is a wet etching, so it is very important to secure etching uniformity and process reproducibility. The device layout was designed by considering the electrochemical reaction involved in recess etching, and a reproducible gate recess etching process was developed by finding optimized etching conditions. Using the developed gate electrode process technology, we were able to successfully manufacture various monolithic microwave integrated circuits, including low noise amplifiers that can be used in the 28 GHz to 94 GHz frequency range.     

Theory of <Emphasis Type="Italic">d</Emphasis>-Wave High Temperature Superconductivity in the Cuprates Involving Non-linear Lattice Modes

The transition mechanism in high temperature cuprate superconductors is an outstanding puzzle. A previous suggestion on the role of non-linear local lattice instability modes on the microscopic pairing mechanism in high temperature cuprate superconductors (Lee, J. Supercond. Nov. Magn. 23(3), 333; 2009) is re-examined to provide a viable mechanism for superconductivity in these cuprates via an unusual lattice vibration in which an electron is predominantly interacting with a non-linear Q ₂ mode of the oxygen clusters in the CuO₂ planes. It is shown that the interaction has explicit d-wave symmetry and leads to an indirect coupling of d-wave symmetry between electrons. As a follow-up of Lee (J. Supercond. Nov. Magn. 23(3), 333; 2009), in this paper, we report detailed derivation of the superconducting gap equation and numerical solutions for the transition temperature as inherently integrated into the so-called extended Hubbard model (EHM). A unique feature in the EHM is that the transition temperature has an inherent k-dependence. In addition, superconducting gap solutions are restrained to specific regions in the first Brillouin zone (1BZ). It is very feasible to expect that the EHM naturally inherits a huge parameter space in which experimentally measured results, such as the well-known superconducting dome and the phase diagram from electronic Raman scattering (Sacuto et al., Rep. Prog. Phys. 76(2), 022502; 2013) can be accommodated. The EHM model hence offers a viable venue to search for or confirm any signature in k-point-sensitive experimental measurements.