Synthesis and properties of new polymerized monomer reactants matrix resins of pyrrolone–benzimidazole copolymers containing pyridine unit

A series of new polymerized monomer reactants (PMR) matrix resins of poly(pyrrolone‐benzimidazole)s containing a pyridine unit (PPBP) were synthesized by polycondensation of monoethyl ester of cis‐5‐norbornene‐endo‐2,3‐dicarboxylic acid, 2,6‐diphenyl ester pyridinedicarboxylic acid or 3,5‐diphenyl ester pyridinedicarboxylic acid, and diethyl ester of 4,4′‐oxydiphthalic acid with 3,3′‐diaminobenzidine in a mixing solution of anhydrous ethyl alcohol and N‐methylpyrrolidone under given temperature and pressure conditions. The resulting resin solutions showed good solubility in polar organic solvents and stability at room temperature. The corresponding PPBP matrix resin, molded powder, and molded plate were prepared by undergoing amidation, imidization, cyclization, and crosslinking reactions when the reaction temperature was increased from 80 to 350°C, successively; the crosslinking structure was formed by the reverse Diels–Alder reaction at 270–290°C under 50 MPa pressure (2.5–3.5 MPa displayed by the pressure meter). The chemical reactions and properties of the resulting PPBP were studied by means of FTIR, TGA, and DMA methods, and the results indicated that the kinds of PPBP materials retain excellent thermal stability and processability; when the initial decomposition temperature was above 620°C the T_g was at 413.5°C for 3,5‐PPBP‐20 molded plate. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91: 3981–3990, 2004     

Curing process of powdered phenol–formaldehyde resol resins and the role of water in the curing systems

The curing behavior of two kinds of commercial powdered resol phenolic resins was studied by differential scanning calorimetry. Liquid‐state ¹³C‐NMR spectroscopy was used to aid in understanding the curing behavior by detecting the structure of powdered resins. The reaction mechanism was interpreted with the dependency of activation energy on the degree of conversion. The results indicate that there are differences in the curing mechanism between core and face phenolic resins. The curing process of core resin was faster than that of face resin at the same reaction temperature. The water added in the curing system played an important role of plasticizer or diluent according to different curing stages and water content. In the initial curing stage, water mainly diluted the system and retarded the curing reactions. However, at the higher degrees of conversion, water played the role of plasticizer to decrease the effect of diffusion on the curing reactions to make the curing reactions more complete. The excess water added in the curing system played the role of diluent at almost all stages during the curing process. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 1371–1378, 2003     

The effect of Al content on the wettability between liquid iron and MgOAl2O3 binary substrate

In the present study, the wettability between liquid iron with two different Al contents and MgOAl₂O₃ binary substrates was studied in reducing atmosphere. The contact angles between liquid iron with 18?ppm Al and MgO, MgO·Al₂O₃, Al₂O₃ were 133.5°, 113.7°, 126.9° respectively. With the variation of the substrate composition, the contact angles for the intermediate binary phases of the three components (MgO, MgO·Al₂O₃, Al₂O₃) obeyed the Cassie theory. In the experiment using iron with 370?ppm Al, all the contact angles were higher than that using low Al-containing iron. The surface of the iron drop was covered with an oxide layer, which mainly consisted of many small particles. With the variation of the substrate gradually from MgO to Al₂O₃, the composition of the oxide layer changed from MgO·Al₂O₃ to CaOAl₂O₃. The formation of the oxide layer prevented the spreading of liquid iron, leading to the increase of the contact angle.     

Characterization of poly(vinyl pyrrolidone‐co‐isobutylstyryl polyhedral oligomeric silsesquioxane) nanocomposites

Poly(vinyl pyrrolidone‐co‐isobutyl styryl polyhedral oligomeric silsesquioxane)s (PVP–POSS) were synthesized by one‐step polymerization and characterized using FTIR, high‐resolution ¹H‐NMR, solid‐state ¹³C‐NMR, ²⁹Si‐NMR, GPC, and DSC. The POSS content can be controlled by varying the POSS feed ratio. The T_g of the PVP–POSS hybrid is influenced by three main factors: (1) a diluent role of the POSS in reducing the self‐association of the PVP; (2) a strong interaction between the POSS siloxane and the PVP carbonyl, and (3) physical aggregation of nanosized POSS. At a relatively low POSS content, the role as diluent dominates, resulting in a decrease in T_g. At a relatively high POSS content, the last two factors dominate and result in T_g increase of the PVP–POSS hybrid. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 2208–2215, 2004     

Preparation and properties of (BATB–ODPA) polyimide–clay nanocomposite materials

A series of polymer–clay nanocomposite (PCN) materials consisting of 1,4‐bis(4‐aminophenoxy)‐2‐tert‐butylbenzene–4,4′‐oxydiphthalic anhydride (BATB–ODPA) polyimide (PI) and layered montmorillonite (MMT) clay were successfully prepared by an in situ polymerization reaction through thermal imidization up to 300°C. The synthesized PCN materials were subsequently characterized by Fourier‐Transform infrared (FTIR) spectroscopy, wide‐angle powder X‐ray diffraction (XRD) and transmission electron microscopy (TEM). The effects of material composition on thermal stability, mechanical strength, molecular permeability and optical clarity of bulk PI and PCN materials in the form of membranes were studied by differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), dynamic mechanical analysis (DMA), molecular permeability analysis (GPA) and ultraviolet‐visible (UV/VIS) transmission spectra, respectively. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 1072–1079, 2004     

Towards a framework for large-scale multimedia data storage and processing on Hadoop platform

Cloud computing techniques take the form of distributed computing by utilizing multiple computers to execute computing simultaneously on the service side. To process the increasing quantity of multimedia data, numerous large-scale multimedia data storage computing techniques in the cloud computing have been developed. Of all the techniques, Hadoop plays a key role in the cloud computing. Hadoop, a computing cluster formed by low-priced hardware, can conduct the parallel computing of petabytes of multimedia data. Hadoop features high-reliability, high-efficiency, and high-scalability. The numerous large-scale multimedia data computing techniques include not only the key core techniques, Hadoop and MapReduce, but also the data collection techniques, such as File Transfer Protocol and Flume. In addition, distributed system configuration allocation, automatic installation, and monitoring platform building and management techniques are all included. As a result, only with the integration of all the techniques, a reliable large-scale multimedia data platform can be offered. In this paper, we introduce how cloud computing can make a breakthrough by proposing a multimedia social network dataset on Hadoop platform and implementing a prototype version. Detailed specifications and design issues are discussed as well. An important finding of this article is that we can save more time if we conduct the multimedia social networking analysis using Cloud Hadoop Platform rather than using a single computer. The advantages of cloud computing over the traditional data processing practices are fully demonstrated in this article. The applicable framework designs and the tools available for the large-scale data processing are also proposed. We show the experimental multimedia data including data sizes and processing time.     

中试规模制备L-茶氨酸及其衍生物

报道了中试规模制备L-茶氨酸和L-谷氨酰胺的一种方法。以廉价的L-谷氨酸为原料,采用邻苯二甲酰基作为保护基,保护L-谷氨酸的α-氨基,醋酐回流10 m in使其分子内脱水生成N-邻苯二甲酰-L-谷氨酸酐,在常温、常压条件下,分别与2 mol/L氨水和2 mol/L乙胺水溶液反应生成中间产物N-邻苯二甲酰-L-谷氨酰胺、N-邻苯二甲酰-L-茶氨酸,中间产物在室温条件下与0.5 mol/L水合肼反应48 h脱除保护基,分别以57%、61%的收率得到L-谷氨酰胺和L-茶氨酸。     

硅基纳米b-SiC量子点列阵的制备

报道了用两步自组装法制备硅基纳米碳化硅量子点列阵. 先将两种硅烷偶联剂均匀有序地偶联到洁净的单晶硅片上，其中一种偶联剂能打破C60上的碳碳双键而使C60通过偶联剂均匀有序地分布在硅片的表面上. 然后用夹心法或覆盖法将样品在900℃的氮气氛中退火20 min，使C60分解成活性碳，与周围的硅原子结合生成碳化硅，碳化硅分子的自组装形成了碳化硅纳米晶粒(量子点)，C60在硅表面的有序排列导致了纳米碳化硅量子点列阵形成.     

Kinetics of thermal decomposition of unsaturated polyester resins with reduced flammability

In this article, the kinetics of thermal decomposition of unsaturated maleic–phthalic polyester resins, flame‐retarded with zinc hydroxystannate, was studied by thermogravimetric analysis at different heating rates. At the first stage, it was found, on the basis of isoconversional analysis by the methods of Friedman and of Ozawa–Flynn–Wall, that the value of the (apparent) activation energy (E) characteristically changes in three steps during the degradation. Further kinetic studies using nonlinear regression methods revealed the best fits for both pristine and stabilized resins. It was observed that the course of E versus the degree of conversion (α) during degradation of zinc hydroxystannate‐containing resins (α > 0.8) was characterized by higher values of E—this phenomenon can be explained in terms of the flame‐retardation action of zinc hydroxystannate, which is believed to operate primarily in the condensed phase. At the next stage, kinetic analysis by the nonregression method was performed to find the kinetic model [f(α) function] of the decomposition process; hence, for pristine resin, the best fit was found for the Avrami–Yerofeeyev model (nuclei growth), and for stabilized samples, the nth‐order function with catalysis proved to be the best approximation. The obtained kinetic parameters in the form of E, the preexponential factor A, and the model function f(α) allow a prediction of the polyester resin's thermal behavior in an extrapolated range of degree of conversion, time, and temperature. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 2851–2857, 2003     

PVC及PMMA在CO_2环境中玻璃化转变特性的研究

对聚合物在CO2环境中的玻璃化转变特性进行了研究。利用蠕变柔量法,在自建的实验装置上,对聚氯乙烯和聚甲基丙烯酸甲酯在CO2环境中不同压力下的玻璃化转变温度进行了测定,并利用间接法测定了对应状态下聚合物中CO2的质量分数。结果表明,在CO2环境中2种材料的玻璃化转变温度显著降低。利用基于经典热力学与统计热力学理论构建的模型,对聚合物中不同的CO2质量分数对应的玻璃化转变温度值进行了计算,得到的计算结果与实验结果较吻合。