Autolysis and the endogenous proteinases characterised in beardless barb (Anematichthys apogon) muscle

Beardless barb is a common fish species used in fermentation of fish paste Ka-pi-plaa. Autolytic profile of beardless barb muscle showed the maximum autolysis was at 50 °C, at both acidic and alkaline pH values. With augmentation concentration of NaCl, autolytic activity slightly decreased. Endogenous proteinases isolated from fish muscle in crude extract forms were also characterised. The acidic proteinases had optimum activity at pH 3.0 and 50°C, and they showed higher proteolytic activity than the alkaline proteinases which were optimally active at pH 9.0 and 50 °C. Proteinases in peak at pH 3.0 were inhibited by pepstatin A, but those in peak at pH 9.0 were highly inhibited by PMSF, TLCK and soybean trypsin inhibitor, suggesting that both aspartic and serine proteinases were existed in beardless barb muscle. The proteinases were stable in pH range of 2.0-5.0 but unstable at the temperatures higher than 40 °C. NaCl suppressed the proteolytic activity, ATP activated the proteinase activity, while CaCl₂, MgCl₂ and CoCl₂ exhibited no influence on the activity. The results implied that cathepsin D is the predominant proteinase responsible for autolysis in beardless barb. The findings were useful to improve the processing and qualities of Ka-pi-plaa product using beardless barb as raw material.     

Facile construction of composition-tuned ruthenium-nickel nanoparticles on g-C3N4 for enhanced hydrolysis of ammonia borane without base additives

Developing high-efficiency and low-cost catalysts for hydrogen evolution from hydrolysis of ammonia borane (AB) is significant and critical for the exploitation and utilization of hydrogen energy. Herein, the in-situ fabrication of well-dispersed and small bimetallic RuNi alloy nanoparticles (NPs) with tuned compositions and concomitant hydrolysis of AB are successfully achieved by using graphitic carbon nitride (g-C₃N₄) as a NP support without additional stabilizing ligands. The optimized Ru₁Ni_7.5/g-C₃N₄ catalyst exhibits an excellent catalytic activity with a high turnover frequency of 901 min^?1 and an activation energy of 28.46 kJ mol^?1 without any base additives, overtaking the activities of many previously reported catalysts for AB hydrolysis. The kinetic studies indicate that the AB hydrolysis over Ru₁Ni_7.5/g-C₃N₄ is first-order and zero-order reactions with respect to the catalyst and AB concentrations, respectively. Ru₁Ni_7.5/g-C₃N₄ has a good recyclability with 46% of the initial catalytic activity retained even after five runs. The high performance of Ru₁Ni_7.5/g-C₃N₄ should be assigned to the small-sized alloy NPs with abundant accessible active sites and the synergistic effect between the composition-tuned Ru–Ni bimetals. This work highlights a potentially powerful and simple strategy for preparing highly active bimetallic alloy catalysts for AB hydrolysis to generate hydrogen.     

A first-principles investigation on mechanical and metallic properties of titanium carbides under pressure

The titanium carbides are potential candidates to achieve both high hardness and refractory property. We carried out a structural search for titanium carbides at three pressures of 0 GPa, 30 GPa and 50 GPa. A phase diagram of the Ti-C system at 0 K was obtained by elucidating formation enthalpies as a function of compositions, and their mechanical and metallic properties of titanium carbides were investigated systematically. We also discussed the relation of titanium concentration to the both mechanical and metallic properties of titanium carbides. It has been found that the average valence electron density and tractility improved at higher concentrations of titanium, while the degree of covalent bonding directionality decreased. To this effect, the hardness of titanium carbide decreases as the content of titanium increases. Our results indicated that the titanium content significantly affected the metallic properties of the Ti-C system.     

Enhancing urban infrastructure investment planning practices for a changing climate.

Climate change raises many concerns for urban water management because of the effects on all aspects of the hydrological cycle. Urban water infrastructure has traditionally been designed using historical observations and assuming stationary climatic conditions. The capability of this infrastructure, whether for storm-water drainage, or water supply, may be over- or under-designed for future climatic conditions. In particular, changes in the frequency and intensity of extreme rainfall events will have the most acute effect on storm-water drainage systems. Therefore, it is necessary to take future climatic conditions into consideration in engineering designs in order to enhance water infrastructure investment planning practices in a long time horizon. This paper provides the initial results of a study that is examining ways to enhance urban infrastructure investment planning practices against changes in hydrologic regimes for a changing climate. Design storms and intensity-duration-frequency curves that are used in the engineering design of storm-water drainage systems are developed under future climatic conditions by empirically adjusting the general circulation model output, and using the Gumbel distribution and the Chicago method. Simulations are then performed on an existing storm-water drainage system from NE Calgary to investigate the resiliency of the system under climate change.     

简体接管边缘应力区局部减薄处应力特征

参考《压力容器定期检验规则》第40条,采用有限元方法计算了筒体接管边缘应力区局部减薄处的应力分布,得到了局部减薄处凹坑的尺寸与位置对应力的影响趋势,讨论了应力集中系数随尺寸变化的规律,为筒体接管边缘应力区局部减薄处的强度评定提供了一定的计算依据。     

探针馈电圆柱共形微带天线阻抗特性的FDTD法分析

将圆柱坐标系下非分裂式理想匹配层吸收边界条件(UPML)引入到圆柱共形微带天线的全波分析中，并给出了其中的场量迭代方程，明显地减小了计算空间，简化了编程；提出了圆柱坐标系下考虑有限尺寸探针半径的新算法，使得计算结果更加精确；应用GPOF方法预估了时域晚时响应，使计算时间减少了70％～90％。本文给出的模型能够对任意多层圆柱共形结构的微带天线进行计算，因此对此类天线的CAD设计具有实际意义。     

铌和钨对γ-TiAl基合金热稳定性的影响

采用光学显微镜(OM)，扫描电镜(SEM)，X射线衍射研究了TiAl—5Nb，TiAl—14．3Nb，TiAl—8Nb—1W，TiAl—12．3Nb-2W四种合金片层组织在1000℃的热稳定性。结果表明，TiAl—12．3Nb-2W合金热稳定性最好，但合金元素对TiAl基合金热稳定性的影响机理还有待进一步的研究。     

氧化钙固体碱催化剂用于大豆油和甲醇酯交换制备生物柴油的研究

对氧化钙固体碱催化剂用于甲醇和大豆油的酯交换反应制备生物柴油（脂肪酸甲酯）进行了研究，考察了醇油摩尔比、反应温度、催化剂用量等因素对生物柴油产率的影响，以及采用四氢呋喃等溶剂溶解产物中的甘油和脂肪酸甲酯以分离回收催化剂的方法。结果表明，在醇油摩尔比为12、反应温度为65℃、催化剂用量为8％、反应1．5h的条件下，生物柴油产率达到了95％以上。重复使用实验结果表明，CaO的催化活性比K2CO3／γ-Al2O3和KF／γ-Al2O3固体碱催化剂高，寿命更长，重复使用20次后催化效果无明显下降。     

乌江索风营水电站地下厂房岩锚梁镜面混凝土施工技术

镜面混凝土是水电工程建设中新兴的一门施工技术,在乌江索风营水电站地下厂房岩锚梁混凝土施工中采用了镜面混凝土,这在技术上是一次大胆的尝试和创新,既满足了功能上的要求,同时也达到了美观和装饰地下厂房的效果,为今后水电工程施工中广泛采用镜面混凝土技术提供了样本和宝贵经验。     

RI/VI联用测定聚乙烯相对分子质量及其分布

150℃测试温度下，以1，2，4-三氯苯为溶剂，采用示差折光指数器，毛细管黏度计双检测器联用凝胶渗透色谱技术测定了聚乙烯的相对分子质量及其分布。与常规凝胶渗透色谱法对比，该方法不仅能直接得到聚乙烯较精确的相对分子质量和分布形态，同时可以得到聚乙烯的特性黏数分布。