基于IGBT的PWM大功率直流伺服驱动

本文介绍ＩＧＢＴ、ＥＸＢ８４１和ＬＥＭ模块在大功率ＰＷＭ直流伺服驱动系统中的应用和系统抗干扰设计。使用效果表明，基于ＩＧＢＴ的设计，可提高大功率直流伺服系统的可靠性和性能、减小体积、降低成本。     

β—BBO晶体的电光性能

用干涉法测量了β－ＢＢＯ晶体的电光系数：γ２２＝２．６，γ３３＝０．２３，γ３１＝０．２５，γ５１＝－３．５×１０－１２ｍ／Ｖ。结果表明如果在Ｙ方向加电场，Ｚ方向通光，β—ＢＢＯ晶体可能制作成有应用价值的光开关。     

一种双光束自动测试光栅绝对与相对光谱衍射效率的原理性方案

提出了一种快速自动测试光栅光谱衍射效率的新方法。重点推导了测试平面光栅绝对光谱衍射效率与相对光谱衍射效率公式，介绍了双光束高精度自动测试光栅光谱衍射效率曲线的基本原理、方案与方法，并分析了测试精度。研究表明，本方案的测试速度和精度均比一般测试方法提高一倍，并能有效地消除光源波动对测量结果的影响，测量误差小于５×１０－３。     

The feature-based posterior crown design in a dental CAD/CAM system

This paper presents a newly developed CAD approach for a quick and accurate design of a dental posterior prosthesis. The approach arises from the basic idea that every human tooth has its own specific features. Based upon the features of the standard posterior tooth, the initial data containing the defined feature points are firstly acquired from the scanned points of the standard tooth. The standard prosthetic profile is thereby formulated using the bicubic Nurbs surface fitting technique. This profile has the two functions of possessing the same features with the patient’s missing posterior tooth, and the adjustability with the feature points and the defined B-spline profile feature curves. For the purpose of the adjustment of the established model, the global and occlusal feature curves are proposed considering the individual patient’s original information. According to these curves, the corresponding standard prosthetic profile is locally adjusted to meet the fit of the global size and occlusal surface. Finally, a close and continuous profile of a posterior crown is generated. Using this design, a posterior prosthesis is successfully manufactured in the computer-aided machining process.     

Network traffic prediction based on a new time series model

Fast and accurate methods for predicting traffic properties and trend are essential for dynamic network resource management and congestion control. With the aim of performing online and feasible prediction of network traffic, this paper proposes a novel time series model, named adaptive autoregressive (AAR). This model is built upon an adaptive memory‐shortening technique and an adaptive‐order selection method originally developed by this study. Compared to the conventional one‐step ahead prediction using traditional Box–Jenkins time series models (e.g. AR, MA, ARMA, ARIMA and ARFIMA), performance results obtained from actual Internet traffic traces have demonstrated that the proposed AAR model is able to support online prediction of dynamic network traffic with reasonable accuracy and relatively low computation complexity. Copyright © 2005 John Wiley & Sons, Ltd.     

液态混合有机标准物质研究

本研究采用重量法配制有机液态混合标样 ,并对配制方法、混合标样的均匀性、稳定性及影响不确定度的因素进行了研究 ,并用气相色谱法进行了比对分析。经稳定性监测 ,稳定度大于等于一年 ,不确定度小于± 2 %。     

La doping effects on intergrowth Bi2WO6–Bi3TiNbO9 ferroelectrics

La doping effects on intergrowth Bi₂WO₆–Bi₃TiNbO₉ ferroelectric ceramics were studied by X-ray diffraction, electron probe microanalysis and dielectric spectroscopy. It was found that the La³⁺ distribution, ferroelectric phase transition and dielectric relaxation behavior are apparently affected by La doping. With increasing La³⁺ content, the site of dopant ion varies, the grain growth of Bi₅TiNbWO₁₅ is restrained, the Curie temperature is reduced and broadened. Furthermore, two dielectric relaxation loss peaks were observed both in temperature and frequency spectra. The calculated relaxation parameters revealed the oxygen vacancy related to the relaxation process.     

宣钢1260 m3高炉扩容大修改造设计

宣钢l260m^3高炉大修改造时将炉容扩大到l350m^3，对高炉本体系统设备及冷却系统、自动控制及检测系统进行了全面的改造更新，在炉腹、炉腰及炉身下部高热负荷区域采用铜冷却壁，取消炉身中上部铸铁冷却壁凸台，并采用薄内衬等先进、适用、可靠、成熟的技术。     

The thermal behavior of mechanically activated galena by thermogravimetry analysis

The thermal decompositions of mechanically activated and nonactivated galenas were studied by thermogravimetry analysis (TGA) at the heating rate of 10 K min⁻¹ in argon. Results indicate that the initial temperature of thermal decomposition (abbreviated as T _di) in the TGA curves for different galenas decreases gradually with increased grinding time. The specific granulometric surface area (S _G), the structural disorder, and the content of elemental sulfur of mechanically activated galenas were analyzed by an X-ray diffraction (XRD) laser particle-size analyzer, XRD analysis, and the gravimetric method, respectively, which shows that the specific granulometric surface area of mechanically activated galenas remains almost constant after a certain grinding time, but the lattice distortions (ε) rise, the crystallite sizes (D) decrease, and the elemental sulfur contents of mechanically activated galenas increase with increased grinding time. The results imply that the decrease of the initial temperature of thermal decomposition in the TGA curves for mechanically activated galenas is mainly caused by the increase of lattice distortions, and the formation of new dangling bonds resulted from the production of elemental sulfur of mechanically activated galenas with increased grinding time. Finally, the differences in the thermal-decomposition reactivity between nonactivated and mechanically activated galenas were also discussed.     

拉伸试验测量不确定度的研究

分析了拉伸试验中抗拉强度Rm的影响因素，对测量不确定度的主要分量进行量化，评定了Rm的相对测量不确定度，作为生产检验中评定测量不确定度的尝试，以便为用户提供钢材性能测量结果的不确定度。