对遂昌金矿采场结构参数的探讨

对于遂昌金矿合理的采场结构参数，目前没有理想的确定方法。本文联系上盘围岩的构造裂隙，矿房的支护形式等提出采场稳定跨度判断指标。经４０个采场的检验，值信度达９７．５％。     

A light intensity function suitable for multimode fiber-opticsensors

Intensity distribution functions on the image plane are derived under the assumption that a multimode optic fiber is illuminated by a light source which can be approximated by infinite uniangular beams carrying equal power. The application of the theory to a Lambertian source is discussed. Experimental results, based on the observation of the light intensity distribution imaged on an opaque screen and collected by a digital camera, are presented. The theoretical and experimental data are compared to verify that the intensity function is an accurate model for describing the realistic approach to sensor design. The limitations of the uniangular and uniform intensity distribution models are discussed on the basis of theoretical and experimental results     

40Cr钢复合热处理强韧化

用光学及电子显微镜(SEM.TEM)观察不同热处理的40Cr 钢的冲击及断裂韧性断口、及金相组织,阐明其间相互关系;断口结构可反映断裂特征,组织情况;细化晶粒提高强度、塑性和冲击韧性,但却减少脆断的特性距离 l 因而降低 K_(1c)模;减少碳(杂质)偏聚而使其呈较均匀地分布,从而减少可诱发塑坑的较粗大的碳(杂质)化合物的析出,即增加塑坑的间距 di 以及增加塑断组成物。从而都可增加断裂临界应变 ef,都可以提高 K_(1c)40Cr 复合热处理既靠先超高温淬、回火以减少碳(杂质)偏聚,改善其分布,以反增加位错马氏体从而提高 K_(1c),也靠后淬、回火细化晶粒而提高强度、塑性和冲击韧性,各自发挥长处达到强韧化。     

TEM study of PLZT ceramics

The microscopic structures of PLZT(7.9/70/30 and x/65/35, x = 7 or 8) ceramics were studied by means of transmission electron microscopy. The presence of micro-regions in PLZTs was first verfied.     

非常金猪年本本好礼送Q1

时尚与传统交织的当下,我们已经迎来12年一遇的传统农历新年--金猪年的到来,环顾大街小巷,到处都充满了喜气祥和的节日气氛,采购礼品也被提上了日程.     

透同光路指示光的CO_2激光器

报导封离型可透同光路指示光的ＣＯ２激光器的研制，并给出了其电流—工作特性曲线。对需可见光作同光路指示的ＣＯ２激光应用整机的开发，开辟了一条新的途径。     

Effect of micro-alloying titanium on the dynamic recrystallization behaviour of steels

The effect of titanium addition on the dynamic recrystallization behaviour of steels has been investigated. Constant strain rate tension tests were conducted in vacuum in the temperature range from 925 to 1225°C. Dynamic recrystallization-time-temperature (RTT) curves were developed from the flow curves at ε? = 1 × 10^?2s^?1. The results of the different steels with and without Ti indicate that the onsets of dynamic recrystallization in all the steels are earlier at higher temperatures than at lower temperatures and the addition of titanium may shift the RTT curve of the C–Mn–Si steel towards the right, i.e. retard dynamic recrystallization. The retarding effect of Ti becomes more intensive at temperatures below about 1075°C where a transition of the RTT relationship occurs. Microstructural examinations show that titanium dissolved in austenite can retard the dynamic recrystallization and the precipitation of TiC produces a more intensive retarding effect.     

GENERALIZED INVERSE GROUP OF SIGNAL AND ITS IMPLEMENTATION WITH NEURAL NETWORKS

A new concept, the generalized inverse group (GIG) of signal, is firstly proposed and its properties, leaking coefficients and implementation with neural networks are presented. Theoretical analysis and computational simulation have shown that (1) there is a group of finite length of generalized inverse signals for any given finite signal, which forms the GIG; (2) each inverse group has different leaking coefficients, thus different abnormal states; (3) each GIG can be implemented by a grouped and improved single-layer perceptron which appears with fast convergence. When used in deconvolution, the proposed GIG can form a new parallel finite length of filtering deconvolution method. On off-line processing, the computational time is reduced to O(N) from O(N2). And the less the leaking coefficient is, the more reliable the deconvolution will be.