用250μm常规光纤进行光纤带研制和生产

为制成特大芯数和超高密集型光缆，采用２５０μｍ常规光纤，以不同的结构和涂层试制了４芯，８芯，１２芯光纤带，通过一系列的试验和测试，了解到光纤带的光性能取决于涂层结构（如边粘式和包复式）涂层材料的杨氏模量以及涂层厚度，确定了适合目前工厂生产情况的光纤带生产技术。     

Reliability prediction of imperfect switching systems subject to multiple stresses

Reliability prediction plays a very important role in system design, and the two key factors considered in predicting system reliability are: failure distribution of the component/equipment and system configuration. This paper discusses about the imperfect switching system with one component in active and k spares in the standby state. When the operating component breaks down, the switch will be able to detect the failure using the sensor and replace the defective component with a functionable spare, so the system can keep operating. Therefore, the switch and the sensor have direct impact on normal operations of the switching systems.The reliability of two types of imperfect switching system is thoroughly discussed and compared: (1) a non-repairable system with only one standby component, one switch and one sensor and (2) a non-repairable system with two standby components, one switch and one sensor. Since gamma distribution is fairly adequate to describe the failure mechanism of a system under k-times of shock multiple stresses. This paper then assumes in system (1) and (2), the operating components follow gamma failures, sensor and switch failures follow exponential distribution. In addition, three modes are assumed in regards to the switch failure: under energized, under failing-open and under failing-closed condition.This paper uses MAPLE computer language to perform reliability estimation and comparison on the above-mentioned systems with components, switch and sensor under different failure rate and various intended period of use. Its results can provide guidelines on decision making for improving system design in industries.     

16×8视音频切换矩阵

介绍１６×８视音频切换矩阵的设计原理和注意事项,同时阐述了ＭＴ８８１６模拟开关切换芯片的功能及其在系统中的应用。     

Depuration of Mytilus galloprovincialis experimentally contaminated with hepatitis A virus

Mussels (Mytilus galloprovincialis) were contaminated with known amounts of laboratory strains of hepatitis A virus and Poliovirus 1 and the effectiveness of a self-cleansing mechanism was studied using a pilot depuration system. Both viruses were rapidly bioaccumulated by mussels and the maximal concentration of about 10(4) TCID50/ml was reached within 1.5 hours. Depuration was carried out up to 24 h; infectivity titer decreased to 10(2) TCID50/ml and 10(3.2) TCID50/ml within 6 h in hepatitis A virus and Poliovirus 1 contaminated mussels, respectively, but only a very slight further decrease was obtained after 24 h. E. coli was used as a control; within 24 h the concentration decreased from 40 to 2 bacteria/ml of mussel (MPN). The elimination of bacteria is not a reliable parameter to control the effectiveness of viral depuration.     

高职“数字电子技术”课程教学模式改革探索

“数字电子技术”是在高职院校教学发展的过程中,相对来说比较重要的一门课程,在很大程度上对学生的后续课程学习产生较大影响。因此,这门课程的教学模式等都会对课程的教学质量优劣产生相应的影响。经济在发展,时代在进步,在新的时代条件下进行高职“数字电子技术”课程教学模式的改革是符合社会发展潮流并且有利于社会的整体发展的。文章将从对高职“数字电子技术”的教学进行简单介绍出发,找出目前高职院校“数字电子技术”课程教学模式存在的问题,并提出相关的解决对策,希望可以对我国高职“数字电子技术”课程教学的发展有所帮助。     

48 fs,108 MHz色散管理孤子掺Er3+光纤激光器

提出了一种基于商售光纤构建的适用于精密光谱光频梳应用的100 MHz重复频率色散管理孤子光纤激光器的设计方案.通过采用低负色散光纤调控重复频率、高正色散光纤增大腔内脉冲呼吸比,构建了重复频率为108 MHz、中心波长为1550 nm的基于正色散掺铒光纤的色散管理孤子光纤激光器,该激光器腔内净色散为-0.0023 ps2,直接输出脉冲宽度为70 fs,经光纤压缩后脉冲宽度为48 fs,且脉冲中心波长处在1550 nm.     

基于时序数据的云网协同平台人工智能运维体系

云计算在企业应用中的拓展不但表现为平台规模的拓展,也表现为平台应用的延伸。“云网协同”和“微服务化”是当前企业云平台演进的重要趋势。随着企业信息化建设重要性的持续提升,微服务化云网协同平台的运行维护面临极大挑战。首先分析了平台运维面临的挑战,梳理了平台人工智能运维需求,提出了基于时序数据分析的平台人工智能运维技术体系,并给出了云网协同平台人工智能运维子系统参考设计。所提技术体系和系统设计具有实用性和推广性,可以作为企业云平台建设和优化的技术途径参考。     

基于电子样稿的柔印首件“粗-精”检测方法

为了解决柔印首件检验没有基准织物图像作为参照的难点,该文提出一种以电子样稿为参照物的柔印首件“粗-精”检测方法,主要分为粗匹配、精匹配和缺陷检测3个阶段。首先,针对电子样稿与印刷首件内容粗细不一、灰度特性差异大、柔印内容重复率高等问题,融合超点(SuperPoint)与强力匹配(SuperGlue)方法进行粗匹配。然后,针对柔印过程版材伸缩、弯曲引发柔印内容局部偏移的问题,采用归一化互相关(NCC)法微调样稿字符,实现精匹配。最后,提出约束聚类的方法将缺陷检测问题转化为电子样稿与柔印首件差异最小化的问题。对比实验表明,该文方法的柔印首件检测性能要优于其他织物印刷品缺陷检测方法,其漏检率为0,误检率为1.3%,平均Dice系数为0.941,且检测时间仅为2.761 s/pcs,满足实际工程的需求。     

基于单通带微波光子滤波的多倍频微波信号产生

理论分析和实验验证了一种多倍频微波信号的光学产生方法。基于大信号相位调制和单模光纤的色散效应产生多个多倍频谐波,通过引入一个中心频率连续可调的单通带微波光子滤波器,实现了对单个倍频微波信号的提取。调节宽带光源的谱分割间隔可实现倍频微波信号调谐输出。在理论分析的基础上搭建了实验系统,利用5GHz低频驱动信号得到了10GHz和15GHz的微波信号,其10dB线宽为几十赫兹,功率波动为1dB～2dB。