现场双面动平衡在离心式多级叶轮风机上的应用

对离心式多级叶轮风机进行振动频谱分析，认为叶轮存在动不平衡，造成风机振动超标，采用现场双面动平奢技术消除了风机转轴动不平衡。     

Hydrogen Reduction and Microstructural Changes of ISF Sinter

The reduction rate and microstructural changes of imperial smelting furnace (ISF) sinter have been investigated by means of thermogravimetric analysis, X-ray difFraction (XRD), scanning electron microscope (SEM ), energy dispersive analysis of X-ray (EDAX) and optical microscope.It is demonstrated that the overall reaction rate of the reduction is influenced by temperature and hydrogen partial pressure in H2 /N2 gas mixtures. There are two distinct zones observed in the partially reduced sinter. The reduction of zincite proceeds predominantly in a narrow range between the two zones, while the reduction of tead oxide and silicate takes place throughout the sinter. The differences between zincite and lead oxide or silicate in reducibility are analysed by thermodynamlcs. The phase transformations and microstructural changes occurring during the reduction process are discussed     

步进电机细分及其在光电测径系统中的应用

叙述了步进电机的细分技术及其测长原理。作为一种测长手段应用于工件直径测量系统中，为提高步进电机细分测长的精度，系统采用了软件补偿的办法，应用光电定位和ＭＣＳ—５１单片机实施控制，构成一种测量范围在１～１００ｍｍ，精度较高，效费比高的光电测径系统。     

Characteristics of aperture coupled microstrip antennas withvarious radiating patches and coupling apertures

A full wave moment method is applied to the analysis of aperture coupled microstrip antennas, in which all components of the electric and equivalent magnetic surface currents are considered. The electric current distributions on the rectangular patch for different coupling aperture positions are presented with their radiation patterns. The effects of the coupling aperture shape and size on the input impedance and radiation performance are also discussed. As an example of new radiators, slotted patches are studied, and it is shown that they can be used to achieve dual-frequency operation     

MIS型单晶硅液晶光阀

详细介绍了一种新颖、快速响应的金属－绝缘层－半导体构成的MIS型单晶硅液晶光阀的结构、工作机理、制作工艺和性能参数测试。液晶采用45°扭曲向列型混合场效应工作模式。所得到的光阀的极限分辨率为40lp／mm，口径40mm，最大对比度＞100：1，在930nm（△λ＝40nm）写入光灵敏度为20μW／cm2，响应时间为15ms。报道了该光阀在大屏幕投影显示中的应用。     

Boundary formulations for shape sensitivity of temperature dependent conductivity problems

Used in concert with the Kirchhoff transformation, implicit differentiation of the discretized boundary integral equations governing the conduction of heat in solids with temperature dependent thermal conductivity is shown to generate an accurate and economical approach for computation of shape sensitivities. For problems with specified temperature and heat flux boundary conditions, a linear problem results for both the analysis and sensitivity analysis. In problems with either convection or radiation boundary conditions, a non-linear problem is generated. Several iterative strategies are presented for the solution of the resulting sets of non-linear equations and the computational performances examined in detail. Multi-zone analysis and zone condensation strategies are demonstrated to provide substantive computational economies in this process for models with either localized non-iinear boundary conditions or regions of geometric insensitivity to design variables. A series of non-linear example problems is presented that have closed form solutions. Exact anaytical expressions tor the shape sensitivities associated with these problems are developed and these are compared with the sensitivities computed using the boundary element formulation.     

Quantitative NMR spectroscopy by matrix pencil methods

The matrix pencil (MP) method, based on the singular value decomposition (SVD), is applied to quantitative NMR spectroscopy. Its relationship to other SVD-based methods is also presented. Simulations and applications are given to demonstrate the capability of superior performance.©1993 John Wiley & Sons Inc     

具有势垒增强层的MSM光电探测器暗电流的计算

将具有完全晶格匹配势垒增强层的MSM－PD简化为一维模型，并通过理论分析，得出了它的暗电流特性，进一步得到器件暗电流与势垒增强层的关系。     

V型尾门在河工模型试验中的应用

尾门是河工模型中常见的装置,也是水位控制的关键设备之一.该文作者根据多年的经验,研制了一种新式尾门--V型尾门.该尾门具有调节精度高、稳定性好、操作方便等优点.并在多个模型中应用,取得了良好的控制效果.文章介绍了V型尾门的制作要点,并结合试验数据论述具体应用效果.     

Analysis of the detectivity for triple-layer heterojunction GaSb/GaInAsSb infrared detectors

In this paper, the detectivity is calculated and analyzed with the front-or backside illuminated case for both N-GaSb/p₂-Ga_0.8In_0.2As_0.19Sb_0.81/p₁-Ga_0.9In_0.1As_0.09Sb_0.91 and N₁-GaSb/n₂-Ga_0.9In_0.1As_0.09Sb_0.91/p-Ga_0.8In_0.2As_0.19Sb_0.81 infrared photovoltaic detectors, respectively. The analysis results show that the main absorption appears in the p-type Ga_0.8In_0.2As_0.19Sb_0.81 material with either front- or backside illuminated case for above two structures. In each structure, the carrier concentration obviously affects the detectivity. The carrier concentration in the wide-bandgap material for the isotype heterojunction should be reduced as low as possible to reduce the tunneling rate at the isotype heterointerface. Moreover, the change of the detectivity with the p-side surface recombination velocity for the N₁-n₂-p structure is more sensitive than that with the p₁-side surface recombination velocity for the N-p₂-p₁ structure. In the N-p₂-p₁ structure with the incident light from the p₁-side surface, two-color detection is achieved.