High-cycle fatigue characteristics of quasi-isotropic CFRP laminates over 10 cycles (Initiation and propagation of delamination considering interaction with transverse cracks)

High-cycle fatigue features of over 10⁸ cycles, particularly the initiation and propagation of edge delamination considering the effects of transverse cracks, were investigated using quasi-isotropic carbon-fiber-reinforced plastic (CFRP) laminates with a stacking sequence of [45/0/−45/90]_s in this study. In the relationship between a transverse crack density and initiation and growth of edge delamination, it was found that fatigue damage growth behavior varied depending on applied stress. It was observed that edge delamination initiated and grew at parts where transverse cracks were dense at ordinary applied stress, whereas it was observed that edge delamination grew before or simultaneously with transverse crack propagation at a low applied stress and high-cycle loading. In addition, the critical transverse crack density where delamination begins growing was calculated to evaluate the interaction between transverse crack and edge delamination growth.     

Characteristics of the Arc Voltage of a High‐Current Air Arc in a Sealed Chamber

The effect of the arc voltage on various factors of design and control was investigated for high currents in order to develop design guidelines for circuit breakers. In this study, the dependence on such factors, namely, the current, arc length, electrode surface area, and internal pressure of the arc voltage, was evaluated quantitatively. As a result of the evaluations, it was estimated that the arc voltage near the electrode surface rises linearly with the arc current and the power ?0.8 of the surface area, and that the voltage in the arc column rises as the 0.3 power of the pressure increase. We confirmed the validity of the estimated voltage characteristics by comparison with the generated voltage in an actual arc‐extinction chamber. The characteristics of the estimated voltage can provide effective guidelines for the design of arc extinguishing chambers. © 2013 Wiley Periodicals, Inc. Electr Eng Jpn, 186(1): 34–42, 2014; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.22487     

An Investigation of Capacitors for Flying Capacitor Converters

Multilevel converters can essentially reduce harmonics even when their switching frequency is low. Among the various topologies of the multilevel converters, flying capacitor converters are considered to be promising converters for realizing high power density. However, the main circuit of the flying capacitor converters has many capacitors. Therefore, in this study, the volume of the capacitors in the flying capacitor converters is determined by taking into consideration the allowable ripple voltage and temperature rise in the capacitor. © 2013 Wiley Periodicals, Inc. Electr Eng Jpn, 186(4): 81–91, 2014; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.22361     

Influence of Tip Clearance on Blade Vibration of Vaneless Radial Turbine

With the increasing demand of turbochargers with high performance and low turbo lag, high cycle fatigue (HCF) of radial turbine blades has become the most commo...     

Chemical reaction kinetics dataset of Cs-I-B-Mo-O-H system for evaluation of fission product chemistry under LWR severe accident conditions

In order to improve LWR source term under severe accident conditions, the first version of a fission product chemistry database named ‘ECUME’ was developed. The ECUME is intended to include several datasets of major chemical reactions and their effective kinetic constants for representative severe accident sequences. It is expected that the ECUME can serve as a fundamental basis from which fission product chemical models can be elaborated for use in the severe accident analysis codes. The implemented chemical reactions in the first version were those for representative gas species in Cs-I-B-Mo-O-H system from 300 to 3000 K. The chemical reaction kinetic constants were evaluated from either literature data or calculated values using ab-initio calculations. The sample chemical reaction calculation using the presently constructed dataset showed meaningful kinetics effects at 1000 K. Comparison of the chemical equilibrium compositions by using the dataset with those by chemical equilibrium calculations has shown rather good consistency for the representative Cs-I-B-Mo-O-H species. From these results, it was concluded that the present dataset should be useful to evaluate fission product chemistry in Cs-I-B-Mo-O-H system under LWR severe accident conditions, where kinetics effects should be considered.     

Effects of processing and cooking on the levels of pesticide residues in soybean samples

The effects of processing and cooking on the levels of pesticide residues in soybean samples were investigated for 14 pesticides in pre-harvest samples. On soaking, the transfer ratios (%, total pesticide residue amount in product/that in soybean) of soaked soybean were greater than 60% for most of the pesticides investigated. The transfer ratio of soymilk ranged from 37% to 92%, and that of tofu ranged from 7% to 63%. The processing factor (Pf, the concentration (mg/kg) of pesticide in product/that in soybean) of tofu ranged from 0.026 to 0.28. These values varied among pesticides. There was a high correlation between the log P(ow) and the transfer ratio of tofu. The test described here should be useful to obtain the transfer ratios of pesticide residues in processing and/or cooking steps.     

Spiral column configuration for protein separation by high-speed countercurrent chromatography

Retention of the stationary phase of aqueous–aqueous polymer phase systems is improved by a spiral column configuration which utilizes the radially acting centrifugal force along the spiral pitch to retain the heavier phase in the outer portion and the lighter phase in the inner portion of the spiral channel. For the separation of proteins which has low mass transfer rates, the system needs further modification of the separation channel to interrupt the laminar flow and enhance mixing of the two phases.     

Patterning of Non-Linear Optical Crystals in Glass by Laser-Induced Crystallization

This paper reports recent progress in the patterning of non-linear optical crystals on the glass surface by laser irradiation. Two techniques for the writing of crystal lines have been developed, i.e., rare-earth (samarium) atom heat processing and transition metal atom heat processing, in which a continuous wave Nd:YAG laser (wavelength: λ=1064 nm) is irradiated to the glasses containing rare-earth (RE: Sm³⁺, Dy³⁺) ions or transition metal (TM: Ni²⁺, Fe²⁺, V⁴⁺) ions. The writing of crystal lines such as β-BaB₂O₄, Sm _x Bi_{1− x} BO₃, and Ba₂TiGe₂O₈ showing second harmonic generations has been successful. It is clarified from the azimuthal dependence of second harmonic intensity and polarized micro-Raman scattering spectra that crystal lines consist of highly oriented crystals along the crystal line growth direction. It is also possible to write two-dimensional crystal bending or curved lines by just changing the laser scanning direction. The mechanism of the laser-induced crystallization has been proposed.     

Detail analysis of fusion neutronics benchmark experiment for iron

In order to specify the best nuclear data on iron, the fusion neutronics benchmark experiment on iron at Japan Atomic Energy Agency (JAEA)/Fusion Neutronics Source (FNS) was analyzed in detail with MCNP-4C and the latest nuclear data libraries, JENDL-3.3, FENDL-2.1, JEFF-3.1 and ENDF/B-VII.0. As a result, totally the calculation result with ENDF/B-VII.0 agreed with the measurement best, except that it underestimated the measured neutron flux above 10 MeV with the depth. It was noted that the calculation result with JENDL-3.3 overestimated the measured neutrons below a few keV. Through the DORT calculations based on the iron data in ENDF/B-VII.0, it was found out that the first inelastic scattering cross-section data of ⁵⁷Fe in JENDL-3.3 caused the overestimation.     

The result of a wall failure in-pile experiment under the EAGLE project

The WF (wall failure) test of the EAGLE program, in which 2 kg of uranium dioxide fuel-pins were melted by nuclear heating, was successfully conducted in the IGR (Impulse Graphite Reactor) of NNC/Kazakhstan. In this test, a 3 mm-thick stainless steel (SS) wall structure was placed between fuel pins and a 10 mm-thick sodium-filled channel (sodium gap). During the transient, fuel pins were heated, which led to the formation of a fuel-steel mixture pool. Under the transient nuclear heating condition, the SS wall was strongly heated by the molten pool, leading to wall failure. The time needed for fuel penetration into the sodium-filled gap was very short (less than 1 s after the pool formation). The result suggests that molten core materials formed in hypothetical LMFBR core disruptive accidents have a certain potential to destroy SS-wall boundaries early in the accident phase, thereby providing fuel escape paths from the core region. The early establishment of such fuel escape paths is regarded as a favorable characteristic in eliminating the possibility of severe re-criticality events. A preliminary interpretation on the WF test results is presented in this paper.