Successive changes in community structure of an ethylbenzene-degrading sulfate-reducing consortium

The microbial community structure and successive changes in a mesophilic ethylbenzene-degrading sulfate-reducing consortium were for the first time clarified by the denaturing gradient gel electrophoresis (DGGE) analysis of the PCR amplified 16S rRNA gene fragments. At least ten bands on the DGGE gel were detected in the stationary phase. Phylogenetic analysis of the DGGE bands revealed that the consortium consisted of different eubacterial phyla including the delta subgroup of Proteobacteria, the order Sphingobacteriales, the order Spirochaetales, and the unknown bacterium. The most abundant band C was closely related to strain mXyS1, an m-xylene-degrading sulfate-reducing bacterium (SRB), and occurred as a sole band on DGGE gels in the logarithmic growth phase that 40% ethylbenzene was consumed accompanied by sulfide production. During further prolonged incubation, the dominancy of band C did not change. These results suggest that SRB corresponds to the most abundant band C and contributes mainly to the degradation of ethylbenzene coupled with sulfate reduction.     

Analysis of indoor PM2.5 exposure in Asian countries using time use survey

Most household fuels used in Asian countries are solid fuels such as coal and biomass (firewood, crop residue and animal dung). The particulate matter (PM), CO, NOx and SOx produced through the combustion of these fuels inside the residence for cooking and heating has an adverse impact on people's health. PM 2.5 in particular, consisting of particles with an aerodynamic diameter of 2.5 μm or less, penetrates deep into the lungs and causes respiratory system and circulatory system diseases and so on. As a result, the World Health Organization (WHO) established guideline values for this type of particulate matter in 2005. In this study, the authors focused on PM 2.5 and estimated indoor exposure concentrations for PM 2.5 in 15 Asian countries. For each environment used for cooking, eating, heating and illumination in which people are present temporarily (microenvironment), exposure concentrations were estimated for individual cohorts categorized according to sex, age and occupation status. To establish the residence time in each microenvironment for each of the cohorts, data from time use surveys conducted in individual countries were used. China had the highest estimate for average exposure concentration in microenvironment used for cooking at 427.5 μg/m³ , followed by Nepal, Laos and India at 285.2 μg/m³, 266.3 μg/m³ and 205.7 μg/m³ , respectively. The study found that, in each country, the PM2.5 exposure concentration was highest for children and unemployed women between the ages of 35 and 64. The study also found that the exposure concentration for individual cohorts in each country was greatly affected by people's use of time indoors. Because differences in individual daily life activities were reflected in the use of time and linked to an assessment of exposure to indoor air-polluting substances, the study enabled detailed assessment of the impact of exposure.     

浙江金华八咏大厦

该项目位于浙江省金华市经济开发区,是浙江八咏公路工程有限公司的办公楼和酒店楼。由于位于经济开发区的入口,委托方提出要使这个项目成为标志性的建筑。预计到周边是一组皇冠式的圆顶建筑,我们设计两个简约到极致的体块。     

Reliable indirect competitive ELISA used for a survey of ochratoxin A in green coffee from the North of Paraná State, Brazil.

The performance of an indirect competitive enzyme-linked immunosorbent assay (ic-ELISA) based on a monoclonal antibody (mAb) for ochratoxin A (OTA) detection was evaluated in a comparative study with high-performance liquid chromatography (HPLC) analysis using 68 freshly harvested coffee samples from the North of Paraná State, Brazil. The anti-OTA mAb showed high specificity and low cross-reactivity with OTA analogues (OTB and OTalpha), but cross-reacted with OTC. This ic-ELISA showed a detection limit of 3.75 ngg-1 sample, when compared to 0.80 ngg-1 by HPLC, with an ic-ELISA/HPLC correlation coefficient of 0.90. As regards OTA analysis of these coffee samples, natural contamination was detected in 10 samples (14.7%) by both methods, where the ic-ELISA values (range 3.9-7.3 ngg-1) were 1.1 to 1.6-fold higher than HPLC data (2.7-4.7 ngg-1). Five samples (7.4%) were OTA positive (range 0.84-1.30 ngg-1) only by HPLC assay, probably due to the higher detection limit reached by ic-ELISA. OTA was undetectable in 53 samples (77.9%) by both methods, while all positive samples (range 0.84-7.30 ngg-1) showed OTA levels lower than 8 ngg-1 (maximum limit recommended by the European Union). The matrix interference of green coffee was minimized by dilution of sample extracts before carrying out the ELISA assay. This mAb-based ic-ELISA can be effectively applied for OTA screening in coffee, because it is simple, sensitive and sample preparation is easy.     

Ultra micro glutamate sensor using platinized carbon-fiber electrode and integrated counter electrode

An integrated ultra micro glutamate sensor has been constructed with a 7 μm diameter platinized carbon-fiber disk (PCD) electrode and a platinum thin-film (PTF) counter electrode fabricated on the glass capillary tube. By platinization, the electrode activity of the carbon fiber is improved. In order to obtain a stable response, a pulse potential is applied for hydrogen peroxide measurement. The PTF counter electrode shows good stability and can be used as a substitute for a silver-silver chloride electrode. Since the integrated PCD electrode shows good characteristics as a hydrogen peroxide sensor, glutamate oxidase is immobilized onto the tip of the PCD electrode to construct the ultra micro glutamate sensor. The sensor shows stable response to glutamate and a response time within 12 s. The calibration range for glutamate measurement is 50–800 μM.     

Contact force detection on a minute aperture mounted optical contact slider using an acoustic emission sensor

Advances in the digital network society require both higher density and higher transfer rates in all sorts of storage systems. Especially in optical recording, the trend toward higher density and larger capacity requires novel surface-recording technologies that can drastically diminish head-to-medium spacing, resulting in an improvement in spatial resolution and, finally, a higher recording density. To this end, we have already proposed a novel contact optical head slider that is able to almost cancel the suspension load by generating hydrodynamic pressure, thus realizing a lower net contact force. Evaluating the dynamic contact force is requisite in realizing its stable sliding operation and higher signal readout performance. In this study, a continuous acoustic emission (AE) signal was utilized to detect the dynamic contact force. AE signal modulation was compared with the applied out-of-plane acceleration on a medium generated by a spindle combined piezo-electric actuator. It was clarified that the detected AE modulation amplitude was approximately proportional to the applied acceleration, and that utilizing AE modulation will be a useful method for evaluating dynamic contact force.     

Structural changes of glass-ceramics of the Cu2O-Al2O3-SiO2 system on heating in air

The behaviour of copper ions in low thermal expansion glass-ceramics prepared from Cu₂O · Al₂O₃ ·_nSiO₂ glasses, or in-spodumene type Cu₂O · Ae₂O₃ ·nSiO₂ crystals included in the glass-ceramics on heating in air was investigated. On hewing at 300 to 500° C, the copper ions behaved as in the corresponding glasses. Cuprous ions in the glass-ceramics or-spondumene type crystals were oxidized into the cupric state, and at the same time an equal amount of cuprous ions to those oxidized were expelled out of the specimen for the requirement of electrical charge neutrality and then reacted with oxygen to form CuO on the surface. The oxidation of cuprous ions and the decrease of the copper content of the-spondumene type crystals brought about a considerable decrease in the lattice spooings.     

Preparation of multiple oxide BaTiO3 fibres by the sol-gel method

Multiple oxide BaTiO₃ gel fibres were prepared by the sol-gel method from Ba(OC₂H₅)₂-Ti(O-isoC₃H₇)₄-H₂O-C₂H₅OH-CH₃COOH and Ba(CH₃COO)₂-Ti(O-isoC₃H₇)₄-H₂O-CH₃COOH solutions. Relatively long gel fibres of 10cm length were obtained from both solutions in the limited composition region. The latter solution in particular showed a spinnability even when it contained no water. Therefore, the occurrence of spinnability of the solution was considered to be due to the formation of linear polymers composed of bridging acetate groups such as TiO-C(CH₃)-O-Ti rather than metalloxane bonding as Ti-O-Ti. Addition of water to the solutions seems to break the bridging acetate bonds and replace some of them by bridging oxygen bonds. The as-drawn gel fibres which were X-ray amorphous crystallized into BaTiO₃ ceramic fibres of 5mm average length upon heating above 600 ° C. However, the gel fibres drawn from the sols without water became powdery on heating because of the lack of Ti-O-Ti metalloxane bonds. The crystallization behaviour of the BaTiO₃ gel fibres is discussed based on the infrared spectroscopy, X-ray diffraction analysis and thermogravimetric-differential thermal analysis.     

Photoelectrochemical properties of sol–gel-derived Ti1−xVxO2 solid solution film photoelectrodes

Ti_1−xV_xO₂ solid solution film photoelectrodes were prepared by the dip-coating sol–gel method. X-ray diffraction and X-ray photoelectron spectroscopy were employed to ensure the formation of the solid solution and their composition. Obvious photoresponses were observed in the visible region for the solid solution film electrodes with x0.05 and the red shift of the photoresponse was enhanced with increasing x. Moreover, the solid solution film electrodes were found to be photoelectrochemically stable. However, the onset potential of photocurrent shifted positively with increasing x. Band model of the solid solution was suggested to explain the effects of the vanadium incorporation on the photoelectrochemical properties.     

Large-area uniform dust-free plasma CVD

In the weak magnetic field perpendicular to the discharge electric field, both the electrons and positive ions are transported in the direction of E×B drift by the space charge electric field produced by the preceded electrons. As a result, radicals are generated uniformly outside of discharge space between the electrodes in the direction of E×B drift. On the other hand, negatively charged heavy particles such as dust particles can be removed from discharge space in the direction opposite to E×B drift of plasmas. The authors have studied the transport mechanisms of magnetized dusty plasmas and its applications for the large-area uniform a-Si:H thin film deposition in plasma CVD methods. This paper reviews the transport phenomena and the transport mechanisms of dust particles and the results of film preparation under particle-free process conditions.