基于连续型条件属性的模糊规则约简算法*

针对粗糙集对于连续域属性决策表的处理能力差以及不容易获得模糊集之间关系等问题,提出一种将模糊集和粗糙集结合起来的连续型条件属性模糊规则约简算法。该算法首先引入三角隶属度函数将连续属性值转换为模糊值,并使用离散模糊神经网络方法获得数据集之间关系。实例验证表明,采用该算法,用户可以根据实际决策需要和领域知识更改阈值,从而获得满意的模糊规则结果。     

基于Visual C++的Pro/E组件的二次开发

应用Pro/E软件的组件环境对产品进行自顶而下修改,进而生成新模具是新产品设计的重要方式.而Pro/E自身组件模式下的尺寸修改功能效率低,以Visual C++为工具对Pro/E进行与尺寸修改对话框类似的"尺寸收集修改器"的二次开发,可实现组件模式下新产品的快速设计.     

成都粘土预处理垃圾渗滤液中COD的实验研究

在不同实验条件下,以成都长安垃圾填埋场渗滤液为研究对象,利用成都粘土去除垃圾渗滤液中的COD.研究表明,成都粘土对垃圾渗滤液中的COD具有一定的去除效果.在最佳实验条件为用土量85g/L,pH=6.0,搅拌速度150 r/m in,搅拌时间40m in,静止时间12h时,成都粘土对垃圾渗滤液中COD的去除率可达到30%.     

反拱法碳纤维加固RC梁的数值模拟分析

采用动力设备将钢筋混凝土梁向上反拱一定的弧度,然后在梁的下部外贴碳纤维布（CFRP）,待碳纤维布养护完全后,卸载,此时后加的碳纤维布与原钢筋混凝土梁同时进入工作状态。作者采用分析软件ANSYS模拟此过程,通过与直接用碳纤维布加固RC梁进行比较,得出反拱法加固RC梁能有效提高其承载能力,对类似工程具有一定的借鉴意义。     

安县晓坝镇震后新建场址主要岩土工程问题及对策

安县晓坝镇处于＂5.12＂汶川大地震极重灾区,受灾严重,不具备重建条件,需选址重建。在野外详细调查的基础上,通过现场勘查和室内试验,深入研究了晓坝镇灾后新建场址的主要岩土工程问题。研究表明,新建场址主要土层为粉质粘土和淤泥质土,属高压缩性软弱土;地下水埋深浅,对基础施工和地基土承载力影响大;建筑场地类别Ⅱ类,属抗震不利地段。提出了深层水泥土搅拌法和换填地基两种软基处理方案,以及加强地基基础抗震设计等措施。     

New CFD Validation Method with Application to Verify Computations of Near Wall Flows

For high Re number flows, a new computational fluid dynamics (CFD) validation method, namely, wall-surface compatibility criteria method and also called Gaos criteria, is proposed to verify near wall flows. As examples, Gaos criteria method and other two CFD verification methods (analytic solutions method and grid convergence analysis) are used to verify FLUENTs near wall flows solutions for two-dimensional incompressible laminar stagnation-point flows. The exact solution of the Navier-Stokes equations for laminar stagnation-point flows satisfy accurately all Gaos criteria, numerical simulations of laminar stagnation-point flows show that when physical parameters (the pressure coefficient and the Stanton number at wall surface) achieve convergence with more and more fine-screen grid, a part of Gaos criteria are not satisfied.     

Sintering technology for micro heat pipe with sintered wick

In order to study reasonable sintering technological parameters and appropriate copper powder size range of micro heat pipe (MHP) with the sintered wick, the forming principle of copper powders in wicks and MHP’s heat transfer capabilities were first analyzed, then copper powders with different cell sizes and dispersions were sintered in RXL-12-11 resistance furnace under the protection of the hydrogen at different sintering temperatures for different durations of sintering time, and finally the sintered wicks’ scanning electron microscope (SEM) images and their heat transfer capabilities were analyzed. The results indicate that the wick sintered with copper powders of larger cell size or smaller size range has better sintering properties and larger heat transfer capabilities; and that the increase of either sintering temperatures or sintering time also helps to improve the wick’s sintering properties and heat transfer capabilities, and the former affects more obviously than the latter. Considering both its manufacturing cost and performance requirements, it is recommended that copper powders with the size range of 140–170 μm are sintered at 900–950°C for 30–60 min in practical manufacturing. In addition, two approaches to improve wick’s porosity are also proposed through theoretical analysis, which suggests that the larger the wick’s porosity, the better the heat transfer capabilities of the MHP.     

Prediction-based energy-efficient target tracking protocol in wireless sensor networks

A prediction based energy-efficient target tracking protocol in wireless sensor networks (PET) was proposed for tracking a mobile target in terms of sensing and communication energy consumption. In order to maximize the lifetime of a wireless sensor network (WSN), the volume of messages and the time for neighbor discovery operations were minimized. The target was followed in a special region known as a face obtained by planarization technique in face-aware routing. An election process was conducted to choose a minimal number of appropriate sensors that are the nearest to the target and a wakeup strategy was proposed to wakeup the appropriate sensors in advance to track the target. In addition, a tracking algorithm to track a target step by step was introduced. Performance analysis and simulation results show that the proposed protocol efficiently tracks a target in WSNs and outperforms some existing protocols of target tracking with energy saving under certain ideal situations.     

Status of research on biogenic coalbed gas generation mechanisms

Biogenic coalbed gas,how it is generated and the geochemical characteristics of the gas are gaining global attention.The ways coalbed gas is generated,the status of research on the generation mechanism and the methods of differentiating between biogenic gasses are discussed.The generation of biogenic coalbed methane is consistent with anaerobic fermentation theory.Commercial biogenic coalbed gas reservoirs are mainly generated by the process of CO2 reduction.The substrates used by the microbes living in the coal include organic compounds,CO2,H2 and acetate.The production ratio and quantity of biogenic coalbed methane depend on the exposed surface area,the solubility and permeability of the coal and the microbial concentration in the coal seam.It is generally believed that biogenic coalbed gas has a value for σ13C1＜-5.5%,C1/C1+＞0.95.The H isotope ratio is controlled by both the environment and the generation mechanism:typically σD1＜-20%.Biogenic methane formed by CO2 reduction has more σD1 than that formed by acetate fermentation.     

Static solution on four-region spherial cavity expansion model in a pressure sensitive medium

Spherical cavity expansion model is often used to study the mechanic characteristics of pressure sensitive mediums. The most important one we do in the paper is that we construct a four-region model with σθ≠0 in damage region,which is different from what Satapathy did before and is more reasonable. By adopting this model,different constitutive equations were constructed by different method-elastic mechanics in elastic region,damage mechanics and fracture mechanics in damage region,and macro-micro mechanics theory in plastic region. Then using Durban's self-similarity assumption,the control differential equations with boundary conditions were established,and the static numerical solution of stress field and displacement field in the three different regions of elastic,damage and plastic area were discussed respectively. Results showed that this four-region model can describe precisely the mechanic characteristics of pressure sensitive mediums under initial pressure.