利用5A284型铣齿机加工转盘螺旋锥齿轮探讨

利用引进设备5A284苏联铣齿机加工石油钻机转盘螺旋锥齿轮，建立计算程序并进行调整计算，详述了遇到的问题及解决方法，使所加工的锥齿轮质量良好。     

酒泉盆地青西油田快速钻井技术

酒泉盆地青西地区油层储藏深 ,地层可钻性差 ,钻井过程中存在机械钻速低、井斜不易控制、刺断钻具频繁等问题。为此 ,在近年的钻井实践中 ,采取了优化钻具组合、优选钻头、应用 PDC钻头、强化钻具管理等措施 ,使该区块的钻井速度不断提高 ,钻井周期缩短 ,钻头用量减少 ,从而形成了一套适合该区块的快速钻井技术。     

用最优化方法和双水模型评价泥质砂岩储集层

本文从测井资料数字处理和解释的角度出发,在系统考察分析常用的各种最优化方法的基础上,认为采用抛物线插值法作一维搜索和变尺度法中的BFGS法作多维搜索相结合的最优化方法,用双水解释模型对泥质砂岩储集层进行评价是适宜的。为此编制了最优化测井解释程序,对胜利油田砂泥岩的测井资料进行了实际处理,并针对本地区的地质特点,对测井响应方程和解释参数的选择等重要问题进行了探讨。数字处理的结果表明,所获得的储集层参数和岩性矿物成分,与岩心分析资料和斯仑贝谢公司的GLOBAL程序处理结果相当吻合。证明它有较好的效果。     

想象热刺激和实际热刺激脑功能成像研究

本实验用功能性核磁共振成像技术（fMRI）对人想象热刺激和实际接受热刺激进行了研究。这是继想象冷刺激和实际接受冷刺激实验之后的另一个关于想象刺激与实际接受刺激的实验、实验结果发现想象热刺激与实际热刺激激活脑区既有相同之处也有不同之处。想象热刺激激活了初级体感区（SI）、左侧额上回、左侧额中回、运动区和扣带回。实际热刺激激活了初级体感区（SI）区、右侧额上回、右侧额中回、运动区。区别在于额叶和扣带回,这个结论与想象冷刺激和实际冷刺激实验的结论几乎相同,只是两种情况下在额叶的具体差别不同。     

Inhomogeneous heat-conduction equation for thermoemission converter

Translated from Atomnaya Énergiya, Vol. 66, No. 2, pp. 131–132, February, 1989.     

Application of Physical Methods for Reducing Plutonium Hexafluoride

The exploding-wire method, the photochemical method of irradiation with a light flux from a high-pressure mercury lamp, a high-intensity spark discharge, and irradiation by a CO₂ laser are used to reduce plutonium hexafluoride and to separate it from uranium hexafluoride. The dependence of the reduction of plutonium hexafluoride on the wire material, the mass of the reduced product, and the amount of input energy is investigated.It is shown that the methods presented for reducing plutonium hexafluoride and separating it from uranium hexafluoride can be used under static and dynamic conditions for preparative purposes and on a large scale.     

PEO-b-PBA对天然橡胶/高吸水树脂共混体系增容作用的研究

通过扫描电子显微镜观察了天然橡胶和高吸水树脂共混体系的微观相态结构 ,研究了两亲性嵌段共聚物PEO b PBA结构本身的吸水能力对天然橡胶和高吸水性树脂共混体系吸水性能及力学性能的影响。结果表明 ,PEO b PBA结构本身的吸水强弱对共混体系的吸水能力贡献很小 ,但却可以显著提高共混体系的吸水膨胀能力和力学性能 ,对特殊的增容作用进行了探讨     

溶胶-凝胶法制备TEOS-DOS基SiO2疏水减反射膜:溶胶微结构对膜性能的影响

以乙醇为溶剂,正硅酸乙酯(TEOS,tetraethoxysilane)在氢氧化铵催化下水解缩聚为纳米尺度的无定型SiO2溶胶颗粒,二甲基二乙氧基硅烷(DDS,dimethyldiethoxysilane)在盐酸催化下水解缩聚为线状聚二甲基硅氧链.用混合溶胶在玻璃基片上旋转镀膜,然后于80℃空气气氛下热处理.实验证明通过DDS将疏水的双甲基链引入镀膜胶体,使膜兼具疏水性和减反射性能.利用激光散射粒度分析仪和电子显微镜研究了溶胶颗粒的粒度变化和聚集情况等溶胶微结构,用物理吸附仪研究了膜的孔结构,考察了热处理前后膜的疏水性和透射谱,得到了溶胶微结构与膜性能之间的关联.     

Analyses of the practical adhesion strengths of the metal/polymer interfaces in electronic packaging

There is a plethora of techniques to measure the adhesion strength of metal/polymer interfaces. However, the practical adhesion strength, which is the work done in separating the film from the substrate (or one film from another), is very sensitive to the test methods and the mechanical effects, such as the residual stress, thickness and mechanical properties of the layers, strain rate, and phase angle. Deriving intrinsic-adhesion properties of the interfaces, which are independent of such parameters, from the practical adhesion-strength measurements is a formidable task. In the present work, data from the three commonly used adhesion tests; pull-out, 90°-peel, and T-peel tests are compared with the intrinsic-adhesion properties of the interface, such as the interface-fracture toughness or the interface-fracture energy, and their implications are discussed. Material systems analyzed were Cu-based lead frame/epoxy-molding compound (EMC) and Cu/Cr/polyimide.     

Analysis of the Efficiency of Control of Flow about Bodies Using Vortex Cells with Allowance for Energy Expenditure

Control of the flow about bodies of different geometry using vortex cells built into the contours is analyzed; the contribution of the expenditure of energy on intensifying the flow within the cells to the drag of the bodies is taken into account.