Determination of three dimensional in situ stress from core discing based on analysis of principal tensile stress

To determine all of the components of in situ stress from core discing, both the directions and magnitudes of the principal in situ stresses must be determined for a disc of a given thickness. In this study, we analyzed the direction and magnitude of tensile stress below an HQ core stub for 11 core lengths using stress conditions under which core discing is likely to occur. First, based on an analysis of the direction of tensile stress below the core stub, we propose a method for determining directions of in situ stress from the height distribution at the periphery of the end surface of a disc. This method can be used with a disc of any thickness. Next, based on an analysis of the magnitude of tensile stress in the central part of a core, we propose a linear criterion for core discing, which can be applied to a core of any length. This criterion was in good agreement with an empirical formula obtained previously in laboratory experiments. By combining information on the direction of in situ stress and the linear criterion for core discing, we propose a method for determining all of the components of in situ stress from core discing under the assumption that vertical stress is given by the overburden stress. Finally, these methods were applied to discs obtained from a field where hydraulic fracturing was performed to measure horizontal stresses. The results showed that the azimuths of the principal stresses estimated from core discing were consistent with those of the principal horizontal stresses determined by hydraulic fracturing and that while the magnitudes of the principal horizontal stresses estimated from core discing showed a large scatter, they were similar to those determined by hydraulic fracturing.     

Comments on “The electromagnetic field of a vertical electricdipole over the Earth or sea” [and reply]

Yokoyama makes some comments on the “numerical distance” contained in the surface wave term in the paper by King and Sandler (see ibid., vol.42, p.383, 1994) comparing it with the one obtained by former authors. He comments on the parameter P in the Fresnel-integral term in the paper. Yokoyama concludes that for the calculation of such a problem in a semi-sphere, the spherical polar coordinate system is preferable to the cylindrical coordinate system including the case of lateral waves. King and Sandler reply to the Comment     

Cytomegalovirus disease accompanied by severe hypoproteinemia in a patient with adult T-cell leukemia-lymphoma

A 62-year-old Japanese man complained of fever, general fatigue, anorexia and watery diarrhea during remission of adult T-cell leukemia-lymphoma. Laboratory examinations showed severe hypoproteinemia (2.9 g/dl). However, neither intestinal lesions associated with ATL nor findings suggesting protein losing gastroenteropathy were observed. Cytomegalovirus (CMV) antigen detection assay using peripheral blood leukocytes revealed that he had an active CMV infection with hemophagocytic syndrome. Treatment with ganciclovir and methylprednisolone led to an improvement of hypoproteinemia. CMV disease and associated hemophagocytic syndrome should be considered as a cause of hypoproteinemia in an immunocompromised host.     

Damage tolerance of glass mat/epoxy laminates hybridized with flexible resin under static and impact loading

This study deals with the impact property and damage tolerance of matrix hybrid composite laminates with different laminate constitution. The matrix hybrid composite laminates consisted of the laminae with a conventional epoxy resin and the laminae with a flexible epoxy resin modified from the conventional resin to avoid the interlaminar delamination. The impact energy absorption ratio greatly depended on the matrix resin placed at the impact face. The energy absorption was almost constant if the conventional resin was placed at the impact surface layer, while it increased exponentially with the increasing fraction of the flexible resin if the flexible resin was placed at the impact face. The impact energy was absorbed by the damage development and propagation in the laminate with conventional resin laminae as the impacted face, while it was absorbed by both the recoverable deformation of the flexible resin and the damage propagation in the laminate with flexible resin laminae as the impacted face.     

Resonant-tunnelling hot-electron transistor (RHET) using a GaInAs/(AlGa)InAs heterostructure

A common-emitter current gain of 10 has been measured at 77 K for a 100 nm-base resonant-tunnelling hot-electron transistor (RHET) using a GaInAs/(AlGa)InAs heterostructure. The current gain for 25 nm-base RHETs has reached 25, which is the highest value yet reported for hot-electron transistors, and the collector current peak-to-valley ratio has reached 15.0 for the same device.     

Bias-stress-induced increase in parasitic resistance of InP-based InAlAs/InGaAs HEMTs

The reliability of InP-based HEMTs is studied, focussing on how it is affected by the doped layer material and gate recess structure. Bias-and-temperature stress tests reveal that fluorine-induced donor passivation in the recess region, formed adjacent to the gate electrode, causes the source resistance (R_s) to increase at large drain bias voltages. The increase in R_s can be prevented by using InP or InAlP as the carrier supply layer material instead of InAlAs. On the other hand, the increase in the drain resistance (R_d) does not depend on the material of the carrier supply layer, which suggests that a mechanism different from that in the case of R_s should be considered. It is also found that a deep gate recess suppresses the increase in R_d after long-term stressing.     

Characterization of C-S-H from Highly Reactive β-Dicalcium Silicate Prepared from Hillebrandite

β-dicalcium silicate synthesized by thermal dissociation of hydrothermally prepared hillebrandite (Ca₂(SiO₃)(OH)₂) exhibits extremely high hydration activity. Characterization of the hydrates obtained and investigation of the hydration mechanism was carried out with the aid of trimethylsilylation analysis, ²⁹Si magic angle spinning nuclear magnetic resonance, transmission electron microscopy selected area electron diffraction, and XRD. The silicate anion structure of C-S-H consisted mainly of a dimer and a single-chain polymer. Polymerization advances with increasing curing temperature and curing time. The C-S-H has an oriented fibrous structure and exhibits a 0.73-nm dreierketten in the longitudinal direction. On heating, the C-S-H dissociates to form β-C₂S. The temperature at which βC₂S begins to form decreases with increasing chain length of the C-S-H or as the Ca/Si ratio becomes higher. The high activity of β-C₂S is due to its large specific surface area and the fact that the hydration is chemical-reaction-rate-controlled until its completion. As a result, the hydration progresses in situ and C-S-H with a high Ca/Si ratio is formed.     

Synthesis and applications of fluoroalkyl end-capped cooligomers having fullerene and mixed fullerenes in the main chain

Fluoroalkanoyl peroxides reacted with FULLERENES [fullerene (C₆₀) and commercially available fullerenes (Nanom Mix^TR and Nanom Black^TR)] and radical polymerizable comonomers such as acrylic acid, N,N-dimethylacrylamide, N-(1,1-dimethyl-3-oxobutyl)acrylamide, and acryloylmorpholine to afford fluoroalkyl end-capped cooligomers having FULLERENES in the main chain under very mild conditions. Fluoroalkyl end-capped Nanom Mix and Nanom Black cooligomers thus obtained were found to exhibit a similar solubility to that of the corresponding fluoroalkyl end-capped cooligomers having fullerene in the main chain. These fluorinated FULLERENES cooligomers were found to form the nanometer size-controlled self-assembled cooligomeric aggregates in aqueous solutions. These fluoroalkyl end-capped FULLERENES cooligomers were more effective for solubilizing fullerene, Nanom Mix and Nanom Black into water, compared to those of the corresponding fluoroalkyl end-capped homooligomers having no FULLERENES in the main chain. Fluoroalkyl end-capped fullerene- and Nanom Mix-acrylic acid cooligomers were found to exhibit fluorescence spectra related to fullerene and Nanom Mix in cooligomers, respectively, in aqueous solutions. Additionally, these fluorinated fullerene- and Nanom Mix-acrylic acid cooligomers were able to increase chemiluminescence intensity related to luminol, effectively, compared to the corresponding fluorinated acrylic acid homooligomers.     

Effects of vesnarinone, a novel orally active inotropic agent with an immunosuppressive action, on experimental cardiac transplantation in rats

BACKGROUND: Vesnarinone (VES) has been used for treatment of patients with congestive heart failure. In addition to inotropic effects, it seems to have immunosuppressive action. We tested the hypothesis that VES suppresses graft rejection, inotropic dysfunction caused by early rejection, and chronic coronary obstruction in a heterotopic rat cardiac transplantation model. METHODS: (1) To study acute rejection, hearts from Lewis-Brown Norway (LBN) rats were transplanted into Lewis rats, which were treated with or without VES (50 or 100 mg/kg/day orally). (2) In a functional study, LBN hearts with or without VES (100 mg/kg/ day) were isolated and perfused on day 3 after transplantation to assess inotropic response to isoproterenol (3 x 10(-8) M). (3) To study chronic rejection, Lewis hearts were transplanted into Fisher 344 rats, which were treated with or without VES (50 mg/kg/day) for 90 days. Coronary obstructive disease was assessed by morphometric analysis. There were five to six animals in each group. RESULTS: (1) VES (100 mg/kg/day) prolonged LBN heart survival (11.7 +/- 0.7 vs. 9.6 +/- 0.7 days in control; P < 0.05). (2) Left ventricular developed pressure was depressed in transplanted hearts regardless of VES treatment (84 +/- 12, 90 +/- 8 vs. 144 +/- 16 mmHg in untransplanted hearts; P < 0.01). The developed pressure after administration of isoproterenol in VES-treated hearts (184 +/- 20 mmHg) was higher than transplanted hearts without VES (118 +/- 16 mmHg; P < 0.05), and similar to untransplanted hearts (203 +/- 27 mmHg; P = NS). (3) Transplanted hearts treated with or without VES showed similar grades of rejection (2.0 +/- 0.3 vs. 2.6 +/- 0.2; P = NS), intimal area (6,996 +/- 3,186 vs. 13,441 +/- 5,165 microns2; NS), and coronary luminal obstruction (45 +/- 16% vs. 67 +/- 14%; NS). CONCLUSIONS: VES produces mild prolongation in survival of rat heart grafts, but has no significant effect on chronic graft atherosclerosis. VES preserves the positive inotropic effects of isoproterenol that are otherwise deteriorated by early acute rejection.