Graded-index polymer optical fiber for high-speed data communication

We successfully obtained a high-bandwidth (1 GHz km) and low-loss (90 dB/km at 0.572 μm of wavelength) graded-index polymer optical fiber by using the interfacial-gel polymerization technique, in which we used an unreactive component to obtain the quadratic refractive-index distribution. This high-bandwidth graded-index polymer optical fiber makes it possible to transmit a high-speed optical signal in a short-range network, which is not possible when we use the step-index type of polymer optical fiber commercially available.     

Spherical gradient-index polymer lens with low spherical aberration

A sphere lens with a spherical gradient index (GRIN) was prepared by the modified suspension polymerization technique. GRIN spheres with quadratic- and linear-index distributions were obtained by two different methods to confirm the effect of the GRIN profile on the focusing property of the sphere lens. It was confirmed in both theory and experiment that the spherical aberration of such GRIN spheres was remarkably decreased compared with that of a homogeneous sphere.     

A novel radial orientation treatment of nematic liquid crystals using magnetic field lines with permanent magnet and applying the assisted electric field

Recently, there has been considerable research on optical devices, such as liquid crystal (LC) lenses and special optical plates, using LCs. In such devices, relatively small LC cells are frequently used, or unique LC orientations are required. As an LC orientation process, we focused on the LC director's orientation induced by the magnetic force line distribution of a small neodymium magnet. We propose a simple method for obtaining radial orientation, which is rather difficult to obtain using the ordinary rubbing method. The initial orientation in the LC cell is a vertical orientation cell with almost zero azimuth anchoring. With the proposed method, the reorientation process is performed with an assisting electric field and a small permanent magnet, unlike the conventional magnetic field orientation process that requires a large electromagnet. Furthermore, a polymer stabilization treatment is used to fix the obtained radial orientation pattern in the LC cell. After the treatment, the applying voltage can control the tilt angle of the director in weak polymer treatment, and a completely fixed orientation pattern can be obtained that in strong.     

Structural and residual stress changes in Mo/a-Si multilayer thin films with annealing

The thermal and mechanical stability of molybdenum and amorphous silicon (Mo/a-Si) optical multilayers (3 and 4 nm nominal thickness of Mo and Si) at 316 °C were studied by annealing experiments. Growth of amorphous Mo-Si interlayers with a stoichiometry of 12 was observed at the Mo/a-Si interfaces. In addition, residual stresses significantly changed in the crystalline Mo and amorphous Si layers with annealing. High resolution electron microscopy, selected area electron diffraction, and X-ray diffraction of the crystalline Mo revealed that tensile stresses increased from 2 to about 10 GPa in the lateral direction (parallel to the interface plane). The compressive strains that developed in the vertical direction (perpendicular to the interface plane) are consistent with Poisson's ratio. Laser deflectometer measurements of thicker (0.1 m) amorphous silicon layers may indicate compressive-stress relaxation in the amorphous silicon with annealing, consistent with other investigations. Overall, the residual stress in a 40-bilayer film changes from about –0.5 to about +1.5 GPa. Structural transformation after relatively short annealing times at the interfaces in the thin amorphous Mo-Si interlayers may rationalize increased tensile strains in the Mo layers.     

Anisotropy in the resistive superconducting transition under magnetic fields in single crystal Pb2Sr2Ho0.5Ca0.5Cu3O8

Anisotropie properties of the single crystal Pb₂Sr₂Ho_0.5Ca_0.5Cu₃O₈ have been investigated by measuring the electrical resistivity in theab-planeρ _ab (H, θ,T), which depends on the angleθ between theab-plane and the magnetic-field direction, in various constant fieldsH perpendicular to the current direction. All the angle-dependent values ofρ _ab (H, θ,T) at a constant temperature are scaled to be on one curve as a function of reduced field. The anisotropic parameter γ≡(m _c ^* /m _ab ^* )^1/2 is estimated as 12–13, which is larger than that of YBa₂Cu₃O₇ and much smaller than that of Bi₂Sr₂CaCu₂O₈. It has been concluded that the anisotropy does not always depend on the thickness of the blocking layer but seems to depend on the overlap of the electronic wave functions along thec-axis. Anisotropy in the pinning potential has also been discussed from the resistive tail in the temperature dependence ofρ _ab (H,θ,T).     

Moiré‐reduction methods for integral videography autostereoscopic display with color‐filter LCD

Abstract— Moiré‐reduction methods for integral videography displays are proposed. Integral videography is based on the principles of integral photography and extended real‐time video processing. There are two moiré‐reduction methods that can be used for integral videography displays that have a lens array and a liquid‐crystal display. The first is color moiré, and the second is intensity moiré. To reduce color moiré, an optimized color‐filter layout in the liquid‐crystal display was used. To reduce intensity moiré, a defocusing method was used. Adesign of a viewing area for the integral videography display is also presented. To control the viewing area, the lens pitch and the shape of the integral videography elemental image was changed. A 5‐in. integral videography display was implemented by using the proposed methods, and an integral videography display was evaluated.     

Ergonomic design and evaluation of the handle for an endoscopic dissector

The purpose of this study was to design an endoscopic dissector handle and objectively assess its usability. The handles were designed with increased contact area between the fingers and thumb and the eye rings, and the eye rings were modified to have a more perpendicular insertion angle to the finger midline. Four different handle models were compared, including a conventional product. Subjects performed dissection, exclusion, grasping, precision manipulation and precision handling tasks. Electromyography and subjective evaluations were measured. Compared to conventional handles, the designated handle reduced the muscle load in the extensor and flexor muscles of the forearm and increased subjective stability. The activity of the first dorsal interosseous muscle was sometimes influenced by the shape of the other parts. The ergonomically designed endoscopic dissector handle used in this study achieved high usability. Medical instrument designs based on ergonomic concepts should be assessed with objective indices.

Practitioner Summary: The endoscopic dissector handles were designed with increased contact area and more suitable insertion angle between the fingers and thumb and the eye rings. Compared to conventional handles, the designated handle reduced the muscle load in the extensor and flexor muscles of the forearm and increased subjective stability.     

Integrating Computing Resources on Multiple Grid-Enabled Job Scheduling Systems Through a Grid RPC System

We present a framework for a parallel programming model by remote procedure calls, which bridge large-scale computing resource pools managed by multiple Grid-enabled job scheduling systems. With this system, the user can exploit not only remote servers and clusters, but also the computing resources provided by Grid-enabled job scheduling systems located on different sites. This framework requires a Grid remote procedure call (RPC) system to decouple the computation in a remote node from the Grid RPC mechanism and uses document-based communication rather than connection-based communication. We implemented the proposed framework as an extension of the OmniRPC system, which is a Grid RPC system for parallel programming. We designed a general interface to easily adapt the OmniRPC system to various Grid-enabled job scheduling systems, including XtremWeb, CyberGRIP, Condor and Grid Engine. We show the preliminary performance of these implementations using a phylogenetic application. We found that the proposed system can achieve approximately the same performance as OmniRPC and can handle interruptions in worker programs on remote nodes. Yoshihiro Nakajima is a Research Fellow of the Japan Society for the Promotion of Science     

Generation of uniform drops via through-hole arrays micromachined in stainless-steel plates

This study investigated the generation of oil drops using new symmetric and asymmetric through-hole-array devices made of stainless steel. The through-hole-array devices were built by piling up six stainless-steel plates, each having circular micro-holes with a diameter of 300 or 500 μm or micro-slots with a shorter line of 300 or 500 μm. Drops were generated by injecting a dispersed phase (refined soybean oil) via the through-hole array into a compartment filled with a continuous phase (Milli-Q water solution containing one of two emulsifiers). The drop detachment from symmetric and asymmetric through holes was observed in real time and analyzed. Uniform oil drops with average diameters of 1.0–4.1 mm and coefficients of variation of typically less than 6% were generated using symmetric and asymmetric through-hole-array devices. The resultant drop diameters for asymmetric through-hole arrays were significantly smaller than those for symmetric through-hole arrays. This paper also discusses experimental results regarding the effects of the microstructure, the dimensions of the through holes, and the type of emulsifier on drop generation and the resultant drop diameter.     

Straight-through microchannel devices for generating monodisperse emulsion droplets several microns in size

The authors recently proposed a promising technique for producing monodisperse emulsions using a straight-through microchannel (MC) device composed of an array of microfabricated oblong holes. This research developed new straight-through MC devices with tens of thousands of oblong channels of several microns in size on a silicon-on-insulator plate, and investigated the emulsification characteristics using the microfabricated straight-through MC devices. Monodisperse oil-in-water (O/W) and W/O emulsions with average droplet diameters of 4.4–9.8 μm and coefficients of variation of less than 6% were stably produced using surface-treated straight-through MC devices that included uniformly sized oblong channels with equivalent diameters of 1.7–5.4 μm. The droplet size of the resultant emulsions depended greatly on the size of the preceding oblong channels. The emulsification process using the straight-through MC devices developed in this research had very high apparent energy efficiencies of 47–60%, defined as (actual energy input applied to droplet generation/theoretical minimum energy input necessary for making droplets) × 100. Straight-through MC devices with numerous oblong microfluidic channels also have great potential for increasing the productivity of monodisperse fine emulsions.