Observation of the epicerebral microcirculation studied by fluorescein angiography (author's transl)

Fluorescein angiography was carried out by modification of method as described by Feindel et al. The hemisphere was widely exposed to allow visualization of surface blood vessels. In the experimental room, the dye was injected rapidly either through a fine polyethylen catheter placed in the lingual artery or thorough the cannula in the femoral vein. For "lingual" angiography 1.6 ml of 1% sodium fluorescein were used, while for "femoral" angiography, 4 ml of 10% solution were injected. In the operating room 4 ml of 1% sodium fluorescein are rapidly injected into an internal carotid catheter. Serial photographs of the passage of the dye through the surface vessels of the hemisphere were taken with a motor-drive Nikon camera at interval of 0.4 seconds, or longer when indicated, starting at the time of the injection. The shutter was synchronized with the discharge of a rapid re-charging stroboscopic light. A wratten gelatin filter 47A (Kodak) was used over the light and a Nikon filter Y52 over the camera lens for Kodak high speed ektachrome film to obtain color photographs. The timing of the interval between photographs was measured to within in 0.4 seconds by recording from a ink written oscillography synchronized with the shutter. Thus the velocity of flow in individual vessels could be calculated from the serial photographs.     

Size Distribution of Gold Nanoparticles Used by Small Angle X-ray Scattering

The size distribution of gold nanoparticles was estimated based on the scattering intensity data obtained from small angle X-ray scattering (SAXS) and compared with the result of micrographs by transmission electron microscopy. The slope of the Guinier plot was used to estimate the mean size assuming a narrow particle size distribution. When the size distribution is narrow, the mean size can be easily obtained from slope of a Guinier plot of scattering data within 10% error. Additionally, assuming a lognormal size distribution, the size distribution and the mean size can be calculated using the experimental SAXS data in the fitting analysis. The histogram method, which utilizes the coefficient matrix of scattering intensity, was also applied to the estimation of the size distribution, and this method could be useful for a rough estimate of the size distribution.     

Effect of radial curvature of magnetic media on glide avalanche

Spacing loss due to micro-waviness and curvature effects in the radial direction of a disk was investigated via numerical simulations and measurements. New techniques based on interferometry and laser scanning were employed to measure radius of curvature (ROC) and to reconstruct the profiles at the outer edge of a disk. A good correlation between ROC values and fly height degradation was obtained, and ROC less than 50 m clearly showed the deterioration in fly height by as much as 1.5 nm. The new measurement techniques proved to be an important means to improve substrate manufacturing processes.     

LaBGeO5 single crystals in glass and second-harmonic generation

Flower-shaped crystals with diameters of 100–200 μm consisting of LaBGeO₅ (LBGO) single crystals similar to petals were observed in the interior of transparent LBGO surface-crystallized glasses. Each flower-shaped crystal was radially grown from the surface of the included bubbles. A more intense second-harmonic generation was observed from the LBGO crystallized glasses with the flower-shaped LBGO single crystals compared to the samples without such crystals based on the Maker fringe technique and second-harmonic (SH) generation microscopy. The SH intensity for the flower-shaped LBGO single crystals monotonically decreased with increasing temperature up to 350 °C, less than the Curie temperature reported so far (530 °C). It is considered that the internal compressive stress induced by the difference in the thermal expansion between the LBGO single crystal and the corresponding glass affect the ferroelectric property of the flower-shaped LBGO single crystals in glass.     

Avoiding Routing Loops on the Internet

Suppose that some particular link in the Internet is currently congested. A natural solution is to try to make packets bypass that link. This can be done by increasing the cost of that link intentionally, say from a ₁ to a ₂, since the Internet uses shortest-path routing. Unfortunately, however, this often causes temporary loops for packet traveling, called routing loops. In this paper we show that routing loops can be avoided by increasing the cost of the link not directly from a ₁ to a ₂ but through an intermediate value, a ₃, i.e., from a ₁ to a ₃ and then to a ₂. We may need several intermediate values. We show that in this case the greedy strategy, namely, raising the cost as much as possible in each step, is optimal.     

Characterization of tribo-layers on self-lubricating plasma-assisted chemical-vapor-deposited TiN coatings

Recently, several new solid lubricants and modern lubrication concepts have been developed to achieve lower friction and wear and thus longer lifetime in severe tribological applications. The aim of this study is to characterize tribo-layers formed during ball-on-disc testing on low-friction, Cl-containing TiN coatings deposited by plasma assisted chemical vapor deposition and to clarify their formation mechanism. Characterization of the transfer layers was done by optical microscopy, optical profilometry, Raman spectroscopy, Auger electron spectroscopy and X-ray photoelectron spectroscopy. Differential scanning calorimetry was used to provide information on the chlorine-influenced chemical reactions of the coatings in ambient air. Iron oxide layers of a thickness in the nm-range have been found on low-chlorine containing TiN coatings (<3 at.% Cl) showing friction coefficients of approximately 0.8, whereas on TiN coatings with higher chlorine contents (>3 at.% Cl) rutile layers were preferably formed, resulting in friction coefficients below 0.2. This self-lubrication mechanism can be explained by the in-situ formation of easy-shearable titanium oxides in the contact zone in the presence of humidity and oxygen.     

High temperature superconductor micro-superconducting-quantum-interference-device magnetometer for magnetization measurement of a microscale magnet

We have developed a high temperature superconductor (HTS) micrometer-sized dc superconducting quantum interference device (SQUID) magnetometer for high field and high temperature operation. It was fabricated from YBa2Cu3O7-delta of 92 nm in thickness with photolithography techniques to have a hole of 4x9 microm2 and 2 microm wide grain boundary Josephson junctions. Combined with a three dimensional magnetic field coil system, the modulation patterns of critical current Ic were observed for three different field directions. They were successfully used to measure the magnetic properties of a molecular ferrimagnetic microcrystal (23x17x13 microm3), [Mn2(H2O)2(CH3COO)][W(CN)8]2H2O. The magnetization curve was obtained in magnetic field up to 0.12 T between 30 and 70 K. This is the first to measure the anisotropy of hysteresis curve in the field above 0.1 T with an accuracy of 10(-12) J T(-1) (10(-9) emu) with a HTS micro-SQUID magnetometer.     

Molecular pharmacology of voltage-dependent calcium channels

Voltage-dependent Ca2+ channels serve as the only link to transduce membrane depolarization into cellular Ca(2+)-dependent reactions. A wide variety of chemical substances that have the ability to modulate Ca2+ channels have been demonstrated both for their clinic utility and for importance in elucidating the molecular basis of various biological responses. Recently, introduction of molecular biology to pharmacology has brought a great deal of information about the molecular basis of drug action in Ca2+ channels. In this review, we attempt to overview recent progress in understanding the interactions between Ca2+ channels and their blockers, namely Ca2+ antagonists, from a molecular and structural point of view.     

A Technique to Eliminate Redundant Inter-Processor Communication on Parallelizing Compiler TINPAR

Optimizing inter-processor (PE) communication is crucial for parallelizing compilers for message-passing parallel machines to achieve high performance. In this paper, we propose a technique to eliminate redundant inter-PE messages. This technique utilizes data-flow analysis to find a definition point that corresponds to a use point where the definition and the use occur in different PEs. If several read accesses occurred in the same PE use the data defined at the same definition point in another PE, redundant inter-PE messages are eliminated as follows: only one inter-PE communication is performed for the earliest read access and the previously received data are used for the following read. In order to guarantee the consistency of the data, a valid flag and a sent flag are provided for each chunk of received data. The control of these flags is equivalent to the coherence control by the self invalidation on a compiler aided cache coherence scheme.