Group Symmetry in Interior-Point Methods for Semidefinite Program

A class of group symmetric Semi-Definite Program (SDP) is introduced by using the framework of group representation theory. It is proved that the central path and several search directions of primal-dual interior-point methods are group symmetric. Preservation of group symmetry along the search direction theoretically guarantees that the numerically obtained optimal solution is group symmetric. As an illustrative example, we show that the optimization problem of a symmetric truss under frequency constraints can be formulated as a group symmetric SDP. Numerical experiments using an interior-point algorithm demonstrate convergence to strictly group symmetric solutions.     

On a fast reactor cycle scheme that incorporates a thoria-based minor actinide-containing cermet fuel

A fast reactor cycle scheme that incorporates a thoria-based minor actinide-containing cermet fuel is given. The present cermet fuel consists of an oxide solid solution of Th and minor actinides and Mo-inert matrix. It has been proposed as a high-performance device that can enhance minor actinide incineration in a fast reactor cycle. It is used in an independent small sub-cycle, whereby dedicated cycle technologies are adopted. Two-step reprocessing process was proposed for the present cermet fuel; it consists of a pre-removal of Mo-inert matrix and an actinide recovery. A preliminary test for the pre-removal of Mo-inert matrix was carried out using a surrogate cermet fuel. Burnup characteristics of a fast reactor core loaded with the cermet fuel were investigated by using neutronic calculation codes. It was revealed that a heterogeneous composition of Mo-inert matrix in inner and outer cores may lead to an effective transmutation of minor actinides and a flattened power density. It was concluded that the present cermet fuel was potentially promising as a high-performance incineration device of minor actinides for fast reactors.     

Effect of catalyst combination on growth of single-walled carbon nanotubes

A new effective catalysts combination of iron — nickel for alcohol CVD technique was found. This catalyst catalyzed well as well as the typical catalyst of iron — cobalt catalysts, but gave a different diameter distribution. Calculating their electrical density of states under the assumption of their solid lattice structures, the result was fairly consistent with experimental results. The number of electrical states near Fermi level that is considered to be important for catalytic reaction is enough and the DOS of iron – nickel catalyst was quite similar to that of cobalt unlike manganese – copper catalyst. Consequently, a blend of catalysts that has a similar DOS to cobalt and has enough states near the Fermi level can be a good catalyst for alcohol CVD.     

Structural Investigation of the Binding of 5‐Substituted Swainsonine Analogues to Golgi α‐Mannosidase II

Golgi α‐mannosidase II (GMII) is a key enzyme in the N‐glycosylation pathway and is a potential target for cancer chemotherapy. The natural product swainsonine is a potent inhibitor of GMII. In this paper we characterize the binding of 5α‐substituted swainsonine analogues to the soluble catalytic domain of Drosophila GMII by X‐ray crystallography. These inhibitors enjoy an advantage over previously reported GMII inhibitors in that they did not significantly decrease the inhibitory potential of the swainsonine head‐group. The phenyl groups of these analogues occupy a portion of the binding site not previously seen to be populated with either substrate analogues or other inhibitors and they form novel hydrophobic interactions. They displace a well‐organized water cluster, but the presence of a C(10) carbonyl allows the reestablishment of important hydrogen bonds. Already approximately tenfold more active against the Golgi enzyme than the lysosomal enzyme, these inhibitors offer the potential of being extended into the N‐acetylglucosamine binding site of GMII for the creation of even more potent and selective GMII inhibitors.     

Microporous activated carbons from used coffee grounds for application to electric double‐layer capacitors

Electrochemical double‐layer capacitors (EDLCs) are devices that store enormous amounts of charge electrostatically when a potential is applied between electrodes of very high surface area (typically made of porous carbon) and an electrolyte. Wider commercialization of this technology has been held back by the lack of ultralow‐cost electrode materials. We demonstrate that used coffee grounds can be processed to form low‐cost electrodes. The surface and electrochemical characteristics of microporous activated carbons from used coffee grounds (CGCs) were measured. First, optimal times and temperatures for carbonization and activation were identified on the basis of Brunauer–Emmett–Teller (BET) surface area, pore volume, and pore size distribution. Second, CGCs were used as polarized electrodes in EDLCs, whose capacitances were evaluated using cyclic voltammetry. The results show that carbonization for 1 h at 600 °C with a heating rate of 300 °C/h, followed by CO₂ activation for 2 h at 1000 °C, affords the highest BET surface area (1867 m²/g) compared to other works. The produced CGCs have many micropores of less than 2 nm across, which contribute to the formation of an electric double layer. Capacitors made using these CGCs show the highest capacitance (103 F/g) in 0.8 M (C₂H₅)₄NBF₄/PC as an organic electrolyte, which is much higher than the ∼80 F/g typically used in organic‐electrolyte‐based commercial EDLCs, suggesting that coffee grounds are a useful electrode material. © 2014 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Application of microalgae hydrolysate as a fermentation medium for microbial production of 2-pyrone 4,6-dicarboxylic acid

1. Download high-res image (309KB)
2. Download full-size image

     

THERMALLY INDUCED STRESS WAVES IN FUNCTIONALLY GRADED MATERIALS WITH TEMPERATURE-DEPENDENT MATERIAL PROPERTIES

This article is concerned with the dynamic treatment of thermally induced stress waves in an infinite elastic plate subjected to impulsive electromagnetic radiation. The plate is assumed to be a functionally graded material (FGM), meaning that the material is composed of multiconstituents in ceramics and metals, the volume fractions of which distribute continuously inside the material. The mathematical problem is one of wave propagation in a typical nonhomogeneous material The radiation absorption is assumed to occur at a constant rate for the duration of the pulse and to diminish exponentially with distance from the surface of the plate, assuming negligible heat conduction. In treating problems, the nature of the stress-wave buildup in the plate is studied for the case of a temperature-dependent solid, that is, when material properties vary with temperature. The numerical procedure employs the characteristic method based on the integration of the governing equations along the characteristics. Numerical calculations are carried out for ceramic-metal FGM plates showing the influences of the temperature-dependent material properties and the volume fractions of the phases composing the FGM on the magnitude of the dynamic thermal stresses.     

Evaluation of photo-induced cellular damage using photoautotrophic cultures of puk-bung hairy roots as a sensing tool

In photoautotrophic cultures of pak-bung hairy roots, strong light irradiation (22 W/m²) increased the content of reactive oxygen species (ROS) in the cells, resulting in chlorophyll (Chl) degradation and DNA injury. The Chl degradation rate, R_D, can be used as a parameter to measure the cellular damage caused by photo-induced stress. The presence of the antioxidants ascorbic acid, chlorogenic acid or catechin reduced the R_D, while lowering the content of ROS and moderating the DNA injury.     

Evaluation of Chinese hamster ovary cell stability during repeated batch culture for large-scale antibody production

Pharmaceutical manufacturing plants can be operated continuously for several months. It is therefore important to use cells with long-term stability for the production of active ingredients. We investigated the reliability and long-term stability of an antibody-producing cell line. A recombinant Chinese hamster ovary (CHO) cell line was cultivated in spinner flasks and reactors, including a practical production-scale reactor (1600 L), for 109 days to produce monoclonal antibodies against the HM1.24 antigen. During cultivation, the cells remained stable and there was an increase in the rate of cell proliferation, yielding viable cells at high density. A decrease in cell-specific productivity was associated with this increase in the rate of cell proliferation. The cells were genetically stable and other measures of cellular function remained consistent throughout the cultivation period.