Excitation density dependence of luminescence spectrum of electron-hole plasma in diamond

Time-resolved band edge luminescence spectrum in IIa diamond has been measured with the 5th harmonics of a pulsed YAG laser (5.82 eV) and an ICCD image intensifier of 5 ns gate width at 290 K. The time-resolved luminescence spectrum is decomposed into three components of free exciton (FE), excitonic complex (EC) and electron-hole plasma (EHP). The decay times of the FE and EC luminescence are 45 and 27 ns, respectively and that of the EHP luminescence has been seen to be shorter than the gate width, 5 ns. The low energy onset of the EHP luminescence spectrum has been observed to decrease with increasing excitation density and attains the onset of the electron-hole drop luminescence spectrum at the excitation density of 0.6 J/cm², at which the electron-hole pair density is 1.2 × 10²⁰ cm^? 3. Furthermore, the excitation density dependences of the FE, EC and EHP luminescence intensities are explained with the percolation theory.     

A method to determine direct‐ and quadrature‐axis inductances of permanent magnet synchronous motors

The equivalent circuit constants of permanent magnet synchronous motors are needed in the calculation of operation characteristics, construction of a control system, etc. These constants can be computed from the data on structural form and materials. However, measurements are necessary to obtain highly precise values. Methods for measurement of the d‐ and q‐axis inductances can be roughly divided into rotational and standstill methods. The standstill methods have the advantage that they are easy to carry out. However, it is difficult to consider magnetic saturation and distortion of the change in the armature winding inductance. The accuracy of the standstill method can be improved if these effects can be readily taken into account. This paper describes a standstill method for measuring accurate d‐ and q‐axis synchronous inductances of permanent magnet synchronous motors. By utilizing the fact that the EMF interference terms in the motor voltage equation considering the distortion of the inductance change are equal to zero when the rotor is in a specific position, the proposed method determines the inductances considering both magnetic saturation and inductance distortion effects from simple off‐line standstill testing. In addition, this method is capable of taking cross‐magnetic saturation into account when used with the necessary testing equipment. The proposed method was implemented on a 0.4‐kW interior permanent magnet synchronous motor with concentrated stator winding. The validity of the proposed method was demonstrated by comparing the measured and calculated results of the no‐load and on‐load characteristics. © 2010 Wiley Periodicals, Inc. Electr Eng Jpn, 171(3): 41–50, 2010; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20969     

Analysis of polymer electrolyte fuel cell performance by electrode polarization model

For development of polymer electrolyte fuel cell (PEFC) lifetime estimation method, a high accuracy PEFC electrode polarization model is required. An electrode polarization model which was previously proposed was verified. However, accuracy of the electrode polarization model was not enough to estimate PEFC performance under various conditions. A new high accuracy PEFC electrode polarization model has been developed based on electrochemical consideration and data observed at elevated pressures. In the cathode polarization model, effects of O₂ diffusion and H₂O plugging have to be considered to obtain high accuracy for long-term operation. In addition, PEFC performance degradation was analyzed by the electrode polarization model. Main factors of PEFC performance degradation are OCV drop, the cathodic activation polarization, voltage drops by O₂ diffusion and H₂O plugging.     

Transient response of cylindrical shells to localized heat sources

An exact analysis of the dynamic problem on the thermal displacements and stresses of cylindrical shells subjected to instantaneous heating is carried out. Equations of motion for cylindrical shells, including the thermal effects, are reduced and solved by using the Fourier and Laplace transformation methods, after obtaining the temperature distribution determined from the nonstationary equation of heat conduction for a shell under a prescribed temperature field. Numerical results are presented for the thermal displacement and stresses due to the time variation together with the quasistatic ones.     

Studies on synthesis and permeability of special polymer membranes

Summary The permeation characteristics of polymer blend membranes from poly(vinylidene fluoride) and poly-(ethylene glycol) to aqueous polymer solution were investigated under carefully controlled conditions. The permeation characteristics were influenced significantly by the blend ratio, the temperature and time of heat treatment, which changed the structure of the resulting membranes.     

The kinetics of hydrolytic polymerization of ε-caprolactam. II. Determination of the kinetic and thermodynamic constants by least-squares curve fitting

The kinetic and thermodynamic constants of the hydrolytic polymerization of ?-caprolactam were determined by least-squares curve fitting. The calculations were carried out using observed kinetic data such as concentration of ?-caprolactam ([CL]), endgroup ([EG]), and ?-aminocaproic acid ([ACA]) and time derivatives of each concentration (rates) ?[CL]/?t, ?[EG]/?t, and ?[ACA]/?t. The sets of the converged constants are obtained for the initial water concentrations of 0.42, 0.82, and 1.18 mole/kg. An averaged set of the constants applicable for this range of the initial composition was also evaluated. The compatibility between observed and calculated concentration and rate curves was improved by the use of the newly developed sets of the constants. The mechanism of the polycondensation reaction is also discussed, based on the rate and kinetic constants obtained by this work.     

Low temperature deposition of hexagonal BN films by chemical vapour deposition

Transparent hexagonal BN films were deposited onto copper substrates from the reactant gas BCl₃-NH₃-H₂ at temperatures in the range 250–700°C. The lowest deposition temperature of the films was about 250°C. The films deposited at temperatures below 450°C were unstable in moist atmosphere and devitrified; a 20%–30% decrease in weight was observed when these films were heated above 600°C in an argon atmosphere. In contrast, the films deposited at temperatures above 600°C were very stable, decreased in weight by 1%–2% on heating and were stable in air at temperatures below 750°C.     

Occurrence,horizontal transfer and degeneration of VDE intein family in Saccharomycete yeasts

VDE is a homing endonuclease gene originally discovered as an intervening element in VMA1s of Saccharomyces cerevisiae. There have been two independent subfamilies of VDE, one from S. cerevisiae strain X2180-1A and the other from Saccharomyces sp. DH1-1A in the host VMA1 gene, and they share the identity of 96.3%. In order to search the occurrence, intra/interspecies transfer and molecular degeneration of VDE, complete sequences of VMA1 in 10 strains of S. cerevisiae, eight species of saccharomycete yeasts, Candida glabrata and Kluyveromyces lactis were determined. We found that six of 10 S. cerevisiae strains contain VDEs 99.7-100% identical to that of the strain X2180-1A, one has no VDE, whereas the other three harbour VDEs 100% identical to that of the strain DH1-1A. S. carlsbergensis has two VMA1s, one being 99.8% identical to that of the strain X2180-1A with VDE 100% identical to that of the strain DH1-1A and the other containing the same VMA1 in S. pastorianus with no VDE. This and other evidence indicates that intra/interspecies transmissions of VDEs have occurred among saccharomycete yeasts. Phylogenetic analyses of VMA1 and VDE suggest that the S. cerevisiae VDEs had branched earlier than other VDEs from an ancestral VDE and had invaded into the host loci as relatively late events. The two VDEs seemed to degenerate in individual host loci, retaining their splicing capacity intact. The degeneration of the endonuclease domains was distinct and, if compared, its apparent rate was much faster than that of the protein-splicing domains.