Efficient electrochemical decomposition of perfluorocarboxylic acids by the use of a boron-doped diamond electrode

The electrochemical decomposition of environmentally persistent perfluorooctanoic acid (PFOA) was achieved by the use of a boron-doped diamond (BDD) electrode. The PFOA decomposition follows pseudo-first-order kinetics, with an observed rate constant (k₁) of 2.4 × 10^− 2 dm³ h^− 1. Under the present reaction conditions, k₁ increased with increasing current density and saturated at values over 0.60 mA cm^− 2. Therefore, the rate-limiting step for the electrochemical decomposition of PFOA was the direct electrochemical oxidation at lower current densities. In the proposed decomposition pathway, direct electrochemical oxidation cleaves the C-C bond between the C₇F₁₅ and COOH in PFOA and generates a C₇F₁₅ radical and CO₂. The C₇F₁₅ radical forms the thermally unstable alcohol C₇F₁₅OH, which undergoes F⁻ elimination to form C₆F₁₃COF. This acid fluoride undergoes hydrolysis to yield another F⁻ and the perfluorocarboxylic acid with one less CF₂ unit, C₆F₁₃COOH. By repeating these processes, finally, PFOA was able to be totally mineralized to CO₂ and F⁻. Moreover, whereas the BDD surface was easily fluorinated by the electrochemical reaction with the PFOA solution, medium pressure ultraviolet (MPUV) lamp irradiation in water was able to easily remove fluorine from the fluorinated BDD surface.     

The physical character of coal char formed during rapid pyrolysis at high pressure

Rapid pyrolysis was conducted in a drop tube reactor using seven coals under various operating conditions. In addition to dense char, porous chars (network char and cenospheric char) were formed by the rapid pyrolysis under certain conditions. Porous char was mainly composed of film-like carbon and skeleton carbon. The pyrolyzed coal char particles were characterized in detail. Morphology and bulk density of porous char were quite different from the dense char formed under the same conditions, but elemental composition and BET surface area were similar to each other. CO₂ gasification reactivity of porous char was lower than dense char in the later gasification stage, and this was ascribed to the low reactivity of skeleton carbon.     

Creep fracture modeling by use of continuum damage variable based on Voronoi simulation of grain boundary cavity

A new approach to creep cavitation damage is developed by combining the basic features of continuum damage mechanics and mechanism-based cavitation models. Based on a polycrystal microstructures simulated by Voronoi tessellation, an anisotropic continuum damage variable is defined, and its evolution is given by applying the mechanism-based equations of cavity nucleation and growth to each grain boundary. Macroscopic creep deformation coupled with the damage variable is calculated by damage mechanics equations. The proposed method has been applied to investigate the damage evolution under uniaxial tension and reversed shear loading conditions.     

Two types of a passive safety containment for a near future BWR with active and passive safety systems

The paper presents two types of a passive safety containment for a near future BWR. They are named Mark S and Mark X containment. One of their common merits is very low peak pressure at severe accidents without venting the containment atmosphere to the environment. The PCV pressure can be moderated within the design pressure. Another merit is the capability to submerge the PCV and the RPV above the core level. The third merit is robustness against external events such as a large commercial airplane crash. Both the containments have a passive cooling core catcher that has radial cooling channels. The Mark S containment is made of reinforced concrete and applicable to a large power BWR up to 1830 MWe. The Mark X containment has the steel secondary containment and can be cooled by natural circulation of outside air. It can accommodate a medium power BWR up to 1380 MWe. In both cases the plants have active and passive safety systems constituting in-depth hybrid safety (IDHS). The IDHS provides not only hardware diversity between active and passive safety systems but also more importantly diversity of the ultimate heat sinks between the atmosphere and the sea water. Although the plant concept discussed in the paper uses well-established technology, plant performance including economy is innovatively and evolutionally improved. Nothing is new in the hardware but everything is new in the performance.     

面素法加工自由曲面的研究与实验

精密制造中需要对淬硬材料的自由曲面进行精加工。本项目采用磨削中心GC,进行了高效自由曲面磨削加工的基础研究。本文提出了3维自由曲面可以分为9种类型的面素,并从几何角度分析了面素的定义方法。采用球头磨球形磨具进行面素法高效磨削加工时,需要对各类面素与球形磨具的作用状态进行解析。分析了由于加工条件和加工面形状变化,工件与球形磨具随之在接触点周速度、砂轮实际切削深度,以及磨削力的变化。分析模型与实验数值有很好的吻合。     

HNF1A Mutations and Beta Cell Dysfunction in Diabetes

Understanding the genetic factors of diabetes is essential for addressing the global increase in type 2 diabetes. HNF1A mutations cause a monogenic form of diabetes called maturity-onset diabetes of the young (MODY), and HNF1A single-nucleotide polymorphisms are associated with the development of type 2 diabetes. Numerous studies have been conducted, mainly using genetically modified mice, to explore the molecular basis for the development of diabetes caused by HNF1A mutations, and to reveal the roles of HNF1A in multiple organs, including insulin secretion from pancreatic beta cells, lipid metabolism and protein synthesis in the liver, and urinary glucose reabsorption in the kidneys. Recent studies using human stem cells that mimic MODY have provided new insights into beta cell dysfunction. In this article, we discuss the involvement of HNF1A in beta cell dysfunction by reviewing previous studies using genetically modified mice and recent findings in human stem cell-derived beta cells.     

波形碳纳米管增强复合材料的有效刚度和局部应力的宏微观均质化数值模拟

采用分子动力学方法简化的碳纳米管等效纤维模型,利用具有精确周期性边界条件的均质化理论和宏微观均质化法分析正弦波形非连续碳纳米管的有效刚度和局部应力分布规律.结果表明,纳米增强复合材料的有效刚度和局部应力对碳纳米管的波形非常敏感,碳纳米管稍有弯曲就会导致复合材料有效刚度降低和应力传递能力的下降,为揭示复合材料中碳纳米管的增强机制和改善增强效果提供理论依据.     

Measurement and numerical prediction of fiber‐reinforced thermoplastics' thermal conductivity in injection molded parts

Recent improvements in injection molding numerical simulation software have led to the possibility of computing fiber orientation in fiber reinforced materials during and at the end of the injection molding process. However, mechanical, thermal, and electrical properties of fiber reinforced materials are still largely measured experimentally. While theoretical models that consider fiber orientation for the prediction of those properties exist, estimating them numerically has not yet been practical. In the present study, two different models are used to estimate the thermal conductivity of fiber reinforced thermoplastics (FRT) using fiber orientation obtained by injection molding numerical simulation software. Experimental data were obtained by measuring fiber orientation in injection molded samples' micrographs by image processing methods. The results were then compared with the numerically obtained prediction and good agreement between numerical and experimental fiber orientation was found. Thermal conductivity for the same samples was computed by applying two different FRT thermal conductivity models using numerically obtained fiber orientation. In the case of thermal conductivity, predicted results were consistent with experimental data measurements, showing the validity of the models. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39811.