The Oxidation behavior of an iron-chromium alloy containing yttrium or rare earth elements between 900° and 1200°C

The oxidation behavior of an Iron-15 wt pct Chromium alloy, some containing small additions of yttrium or rare earth elements, have been observed using a TG and an EPMA method at temperatures between 900° and 1200°C. Yttrium or rare earth element additions to the Iron-Chromium alloy result in a rapid initial oxidation rate, but decrease the total weight gain of the Iron-Chromium alloy at the final time of exposure. The line trace obtained indicates that the increased segregation of chromium content in the inner oxide layer of the alloy containing yttrium or rare earth elements and also shows that the enriched concentration of yttrium or lanthanum is detected within the chromium oxides which exist near the oxide scale/alloy matrix interface. Yttrium or rare earth element oxides serve as the sites for the protective chromium oxide scales.     

Study on anisotropy of growth rate of ice crystal in supercooled water

The purpose of this research was to investigate the ice growth of a single crystal in three dimensions. Three-dimensional pattern of ice crystal growth in supercooled water was observed using Mach–Zehnder spectro-interferometer. Temperature was varied from −0.3 to −1.6 °C. It was found that the ice crystal began to grow as a single crystal at the tip of the capillary tube and propagated freely in supercooled water. Time variation of the shape of dendrite on a–c plane was obtained. It was found that half parabola fits the shape very closely, and the coefficient of squared term, a, of a quadratic function was calculated. The coefficient, a varied in time but at quasi steady state it was found to be depending mostly upon the degree of supercooling. Furthermore, the growth velocity in c-axis at the flat surface was calculated from the thickness measured. It was found that the velocity in c-axis is independent of the degree of supercooling but depends upon time, in other words, the thickness in c-axis.     

Occurrence,horizontal transfer and degeneration of VDE intein family in Saccharomycete yeasts

VDE is a homing endonuclease gene originally discovered as an intervening element in VMA1s of Saccharomyces cerevisiae. There have been two independent subfamilies of VDE, one from S. cerevisiae strain X2180-1A and the other from Saccharomyces sp. DH1-1A in the host VMA1 gene, and they share the identity of 96.3%. In order to search the occurrence, intra/interspecies transfer and molecular degeneration of VDE, complete sequences of VMA1 in 10 strains of S. cerevisiae, eight species of saccharomycete yeasts, Candida glabrata and Kluyveromyces lactis were determined. We found that six of 10 S. cerevisiae strains contain VDEs 99.7-100% identical to that of the strain X2180-1A, one has no VDE, whereas the other three harbour VDEs 100% identical to that of the strain DH1-1A. S. carlsbergensis has two VMA1s, one being 99.8% identical to that of the strain X2180-1A with VDE 100% identical to that of the strain DH1-1A and the other containing the same VMA1 in S. pastorianus with no VDE. This and other evidence indicates that intra/interspecies transmissions of VDEs have occurred among saccharomycete yeasts. Phylogenetic analyses of VMA1 and VDE suggest that the S. cerevisiae VDEs had branched earlier than other VDEs from an ancestral VDE and had invaded into the host loci as relatively late events. The two VDEs seemed to degenerate in individual host loci, retaining their splicing capacity intact. The degeneration of the endonuclease domains was distinct and, if compared, its apparent rate was much faster than that of the protein-splicing domains.     

In-plane detection of scattered light from a minute particle using a resin-based light waveguide incorporated with a microfluidic channel

An optical sensor combined total analysis system (TAS) is thought to be one of the most powerful functional elements needed to realize a “ubiquitous human healthcare” system. In accordance with this concept, we have proposed a fundamental structure of detecting side scattered light from a minute cell or particle running along a microfluidic channel, partially utilizing the channel filled with water or saline solution as a light waveguide. Based on this concept, we have fabricated a trial-manufactured optical TAS chip and carefully evaluated its side scattered light measuring performance in in-plane direction, supplying and detecting visible laser power by using multiple optical fibers and their precise positioning mechanisms. We have successfully obtained experimental results of both transmitted light power change and that of side scattered light, and we confirmed that there was a strong relationship between their signal waveforms. Furthermore, we have developed a hybrid numerical calculation method on the basis of the finite-difference time-domain method, in addition to the beam propagation method. Based on this hybrid method, we tried to compare results between the experimental inverse pulse of transmitted light and a pulse of side scattered light, and those based on numerical calculations. Excellent qualitative accordance was obtained between the inverse pulse of numerical and experimental results. In contrast, the experimental pulse of side scattered light indicated a considerably spread base in comparison to the numerical results.     

In Situ Formation of Hexaferrite Magnets within a 3Y-TZP Matrix: La2O3–ZnO–Fe2O3 and BaO–Fe2O3 Systems

The in situ formation of magnetoplumbite-type (M-type) hexaferrites within a 3Y-TZP matrix was examined for the La₂O₃–ZnO–Fe₂O₃ and BaO–Fe₂O₃ systems. The formation of barium hexaferrite (Ba-M) was rapid enough at a temperature of 1300°C for 2 h to result in a uniform dispersion of fine Ba-M particles in a tetragonal zirconia polycrystal (TZP) matrix. However, the formation of lanthanum-substituted hexaferrite (La-M) was rather sluggish, despite the existence of a charge-compensating divalent oxide. The 3Y-TZP/20-wt%-BaFe₁₂O₁₉ in situ composite possessed good magnetic properties, as well as moderately good mechanical properties.     

Mixed powder coating film using thermoplastic polyester and its alkaline resistance

To improve alkaline resistance, a newly mixed powder coating film using thermoplastic polyethylene terephthalate (PET) was investigated. Two kinds of polyvinyl butyral (PVB) and two kinds of polyamide (PA) were chosen as the secondary polymer. The melting temperatures (T _ms) of these materials were lower than that of primary PET polymer so the mixed powder coating was able to form a dual phase film through a fluidized bed coating process. Microscope and Fourier transform infrared spectroscopy (FTIR) observations revealed that the dual phase structure was indeed successfully formed and there was a secondary layer over the entire surface area of the film. This mixed powder coating film significantly enhanced the alkaline resistance to an environment filled with NaOH solution at 40°C in which a secondary material would be effective in protecting the film. With regard to both alkaline resistance and film formability, PET/PVB was superior to the PET/PA mixture.     

Chained aggregation model with minimum truncation error

A reduced–order model for a multi–input single–output or a single–input multi–output continuous system is proposed. The model is especially suitable for the case where accuracy in the high-frequency region is important. It also satisfies basic conditions for reduced-order models, such as uniqueness, stability, and a simple calculation requirement. Chained aggregation with the minimization of truncation errors introduces an internal system representation characterized by a system matrix of Hessenberg form and a diagonalized covariance matrix.     

Eye-tracking device comparisons of three methods of magnetic resonance image series displays

This study evaluated the effectiveness of three kinds of display methods for magnetic resonance (MR) image interpretation using an eye-tracking device. Seven radiologists interpreted head MR studies by using a single monitor (17-inch, 1,024 X 1,280 bit) in the 4 images/screen display format. Three paging modes were compared: (A) rapid paging only, (B) multiple image series display at the same slice position with consecutive rapid paging, and (C) simultaneous display of multiple series with each image series being browsed independently. Using an eye-mark camera, the radiologist's point of fixation and the duration of fixation were recorded during actual image interpretation. In mode A, the duration of fixation was short, and the points of fixation were distributed randomly over the visual field. In mode B, the points of fixation were clustered chiefly on a specific image series. In mode C, the points of fixation were not clustered on a specified series, but the duration of viewing the T2 series was relatively long. The total tracing area in mode B and C was smaller than that in mode A. Multiple series display, in which selected key series of slices could be viewed effectively, was found to be suitable for MR image interpretation.