Obesity and insulin resistance in human growth hormone transgenic rats

A line of transgenic rats (heterozygotes) carrying a chimeric gene comprising a regulatory portion of murine whey acidic protein and a structural portion of human GH (hGH) genes developed severe obesity with age. To characterize physiological mechanisms that lead to fat accumulation, an array of parameters related to obesity were studied. Blood hGH levels were continuously low, endogenous rat GH secretion was suppressed, and the pulsatility in peripheral GH levels was absent. Plasma glucose, insulin, triglyceride, and FFA levels in the male transgenic rats significantly exceeded those in nontransgenic littermates at 12 and 17 weeks, but not at 7 weeks, of age. All symptoms except hyperlipidemia were restored to normal by treatment with an antidiabetic agent, thiazolidinedione (troglitazone), for 1 week from 17 weeks of age. As phenotypic expression of obesity was already evident before aberration of physiological parameters, it was assumed that animals had a condition in which obesity or hyperlipidemia caused hyperinsulinemia. Gene expression and enzymatic activity of lipoprotein lipase in the adipose tissue in the transgenic rats were not different from those in normal rats. In contrast, the gene expression level of glycerol-3-phosphodehydrogenase was markedly elevated, suggesting that glycerol synthesis was much enhanced in the adipocytes of the transgenic rats. In an i.p. glucose tolerance test, the transgenic rats were not hyperglycemic at 7 weeks of age; however, the animal became hyperglycemic at 15-17 weeks of age. Finally, treatment with recombinant hGH for 1 week to produce pulsatile secretion reduced the size of epididymal and kidney fat pads and restored normal weight gain. These observations suggest that continuously low peripheral GH levels with the lack of pulsatile secretion resulted in obesity and noninsulin-dependent diabetes mellitus.     

Effect of dispersant on paste rheology in preparation of porous alumina with oriented pores by extrusion method

The effect of additives on paste rheology was investigated for preparation of porous ceramics with unidirectionally aligned cylindrical pores. Ammonium poly-carboxylic acid (APA) used as a dispersant and it was adsorbed on alumina powder surface. The adsorption isotherm of APA was fitted by Langmuir equation. The saturated monolayer adsorption was 5.9 mg/g. The apparent viscosity became a minimum at 0.8 mass % of APA corresponding to 71.2 mPa⋅s. This APA amount of 5.6 mg/g, is in good agreement with the observed APA amount. Since the nylon 66 fibers (0–35 vol. %) mixed with the alumina powder have a strong interaction with each other, they became twisted and agglomerated. This agglomeration increased with increasing fiber content but decreased by adding oleic acid. The pastes with added oleic acid were capable of being extruded at higher pressure. The obtained porous alumina ceramics showed highly oriented cylindrical pores parallel to the extrusion direction. The pore orientation was higher in the oleic acid added pastes than those without oleic acid. The added nylon 66 fibers are mostly converted to pores while maintaining the original shape after sintering. The pore size distribution of the obtained porous ceramics measured by mercury porosimetry method showed a peak at about 4 μm which is apparently smaller than that observed in the SEM photographs and the obtained result is considered to be corresponding to the necks formed by fiber contacts.     

Microprocessor-Based Decoupled Control of Manipulator Using Modified Model-Following Method with Sliding Mode

A methodology of discontinuous feedback and continuous feedforward control is developed to achieve accurate decoupled tracking in a class of nonlinear, time varying systems in the presence of disturbances, parameter variations and nonlinear dynamic interactions. The method is based on an improved variable structure control with a sliding mode.     

High frequency model of transformer winding

A high frequency model of transformer winding is used to analyze the voltage oscillations due to various excitations such as the very fast transient overvoltage which occurs at the time of disconnecting switch operations. Usually, a circuit of interlinked inductances and capacitances is used for this purpose, in which circuit parameters have to be properly determined. Previously, those constants have been estimated taking the coil section pair as a unit. In the method proposed here, the section pair can be further subdivided. The time‐domain calculation is conducted combining the frequency analysis and FFT technique. The voltage oscillations of the winding subjected to the lightning impulse are calculated. The correspondence with the experimental results is satisfactory. The response to a chopped impulse shows this method's applicability to high frequency analysis. Since the constants are calculated directly from the design parameters of transformer winding, this technique is particularly useful in developing and designing transformers. © 2003 Wiley Periodicals, Inc. Electr Eng Jpn, 146(3): 8–16, 2004; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.10280     

Magnetic properties of iron-based materials (nitrogen interstitially modified 1:12 compounds and Fe3B-Nd) for low rare-earth bonded magnets

Hard magnetic properties of nitrogen interstitially modified NdM_xFe_12-xN_y compounds and Fe₃B-based ultra-fine crystalline Nd? Fe? Co? T? B alloys of low Nd content of 3 to 5 at. % are studied. The nitrogen-modified compounds have been prepared via the rapid solidification route and the mechanical alloying route both followed by gas nitrogenation using N₂. The Fe₃B-based materials have been prepared by means of rapid solidification and crystallization treatment. The latter materials appear promising as the base material for high-remanence, easy-to-magnetize bonded magnets with small temperature coefficients of remanence. Typical magnetic properties of compaction isotropic bonded magnets produced from this material are B_r = 0.80 T, H_cJ = 350 kA/m, and (BH)_max = 60.5 kJ/m³.     

Chemical Synthesis of a Synthetic Analogue of the Sialic Acid‐Binding Lectin Siglec‐7

As a basis for the development of an artificial carbohydrate‐binding lectin, we chemically synthesized a domain of siglec‐7, a well‐characterized sialic‐acid‐binding lectin. The full polypeptide (127 amino acids) was constructed by sequential native chemical ligation (NCL) of five peptide segments. Because of poor cysteine availability for NCL, cysteine residues were introduced at suitable ligation sites; these cysteine residues were alkylated in order to mimic native glutamine or asparagine residues, or converted to an alanine residue by desulfurization after NCL. After folding the full‐length polypeptide, the sialic‐acid‐binding activity of the synthetic siglec‐7 was clearly demonstrated by STD NMR and ELISA experiments. We succeeded in the synthesis of siglec‐7 by installing three extra cysteine residues with side‐chain modifications and found that these modifications did not affect the binding activity.     

Doubled layered ITO/SnO2 conducting glass for substrate of dye-sensitized solar cells

The effects of indium tin oxide (ITO) and ITO/SnO₂ conducting substrates on photovoltaic properties of dye-sensitized solar cells (DSCs) using nanocrystalline TiO₂ were studied. The decrease in fill factor of the DSCs was correlated to the increase in resistance of conducting substrate. The heat stability of ITO conducting glass was improved by depositing SnO₂ on ITO layer. The efficiency of the cells using double layered ITO/SnO₂ substrate remarkably increased comparing with that of the cells using ITO substrates. It is worth mentioning that increasing in sintering time, which enhanced the electronic contact between substrate and TiO₂, also modified the cell performance of MP-TiO₂ cells. Our experimental finding suggests that 3000 Å ITO substrate, which was covered by 1000 Å SnO₂ layer, exhibited the best properties for the DSCs.     

Application of nuclear energy for environmentally friendly hydrogen generation

It is universally admitted that hydrogen is one of the best energy media and its demand will increase greatly in the near future. However, little hydrogen exists naturally, so that how to generate hydrogen without bringing forth much CO₂${}_2$ will be very important research subject. Hydrogen generation from water using nuclear energy is one of the solutions for this problem. Especially, the high temperature gas cooled reactor (HTGR) has a possibility to generate hydrogen economically compared with other types of nuclear reactors. As for long-lived radioactive waste to be generated by nuclear reactors, it is expected to significantly reduce its burden to the human environment by applying transmutation technologies. This report describes the feature of the hydrogen generation with HTGR and the development of the accelerator-driven subcritical system to reduce radioactive waste ongoing at JAEA.     

Synthesis of non-equilibrium phases in immiscible metals mechanically mixed by high pressure torsion

The structural changes in mechanically mixed metals of immiscible combinations of elements caused by bulk mechanical alloying (MA) through the use of high pressure torsion (HPT) were investigated in Ag–Ni and Nb–Zr systems. There was no alloying between Ag and Ni on atomic scale even after 100 rotations of HPT. On the other hand, the β-Zr phase started to appear after HPT 2 rotations in the Nb–Zr system, even though β-Zr is a high temperature phase. Further, Nb and Zr were completely mixed to form a bcc structured single phase after HPT 100 rotations. The sequence of alloying in the Nb–Zr system during HPT was discussed. These results clearly suggest that non-equilibrium phases can form in the Nb–Zr system by bulk MA by the use of HPT.