Design and construction of a two-degree-of-freedom linear encoder for nanometric measurement of stage position and straightness

This paper presents a two-degree-of-freedom (two-DOF) linear encoder which can measure the position along the moving axis (X-axis) and the straightness along the axis vertical to the moving axis (Z-axis) of a precision linear stage simultaneously. The two-DOF linear encoder is composed of a reflective-type scale grating and an optical sensor head. A reference grating, which is identical to the scale grating except the scale length, is employed in the optical sensor head. Positive and negative first-order diffracted beams from the two gratings are superposed with each other in the optical sensor head to generate interference signals. The optical configuration is arranged in such a way that the direction of displacement in each axis can also be detected. A prototype two-DOF linear encoder is designed and constructed. The size of the optical sensor head is about 50 mm (X) × 50 mm (Y) × 30 mm (Z) and the pitch of the grating is 1.6 μm. It has been confirmed that the prototype two-DOF linear encoder has sub-nanometer resolutions in both the X- and Z-axes.     

Mixed powder coating film using thermoplastic polyester and its alkaline resistance

To improve alkaline resistance, a newly mixed powder coating film using thermoplastic polyethylene terephthalate (PET) was investigated. Two kinds of polyvinyl butyral (PVB) and two kinds of polyamide (PA) were chosen as the secondary polymer. The melting temperatures (T _ms) of these materials were lower than that of primary PET polymer so the mixed powder coating was able to form a dual phase film through a fluidized bed coating process. Microscope and Fourier transform infrared spectroscopy (FTIR) observations revealed that the dual phase structure was indeed successfully formed and there was a secondary layer over the entire surface area of the film. This mixed powder coating film significantly enhanced the alkaline resistance to an environment filled with NaOH solution at 40°C in which a secondary material would be effective in protecting the film. With regard to both alkaline resistance and film formability, PET/PVB was superior to the PET/PA mixture.     

Investigation of Ozone Concentration Measurement by Visible Photo Absorption Method

The measurement of ozone concentration based on the visible photo absorption method is investigated. An LED having an emission peak at 609 nm and a photo diode sensitive at visible light frequencies are used as the light source and the photo detector, respectively. The transmittance is measured as a function of ozone concentration, which is in reasonable agreement with the Beer–Lambert relationship. The effective absorption cross-section can therefore be estimated from the fitting procedure. The concentrations determined by both the UV and visible photo absorptions agree well with each other in the range from 7.1 to 68.4 g/m³(N). The relative error in these concentrations is discussed on the basis of the Twyman–Lothian curve. The ozone measurement for the air-fed ozone generation is also investigated. The effect of photo absorption due to NOx species is unavoidable. The present results provide useful data if the ozone measurement based on the visible photo absorption method is applied to ozone monitoring instruments or used for laboratory experiments.     

In Situ Formation of Hexaferrite Magnets within a 3Y-TZP Matrix: La2O3–ZnO–Fe2O3 and BaO–Fe2O3 Systems

The in situ formation of magnetoplumbite-type (M-type) hexaferrites within a 3Y-TZP matrix was examined for the La₂O₃–ZnO–Fe₂O₃ and BaO–Fe₂O₃ systems. The formation of barium hexaferrite (Ba-M) was rapid enough at a temperature of 1300°C for 2 h to result in a uniform dispersion of fine Ba-M particles in a tetragonal zirconia polycrystal (TZP) matrix. However, the formation of lanthanum-substituted hexaferrite (La-M) was rather sluggish, despite the existence of a charge-compensating divalent oxide. The 3Y-TZP/20-wt%-BaFe₁₂O₁₉ in situ composite possessed good magnetic properties, as well as moderately good mechanical properties.     

Investigation on the polymer particle growth in ethylene polymerization with PS beads supported rac-Ph2Si(Ind)2ZrCl2 catalyst

The mechanism of polyethylene particle growth was investigated using poly(styrene-co-divinylbenzene) (PS beads) supported rac-Ph₂Si(Ind)₂ZrCl₂ catalyst. From the analysis of the resulting polyethylene particles by SEM (scanning electron microscopy) and EPMA (electron probe microanalysis), it was found that the active species are located on the surface layer of catalyst particles and that the catalytic species are uniformly distributed throughout the polymer particles, whereas the cores of PS beads, which lack a potential active species, were not disintegrated during polymerization. These results suggest that the PS beads supported catalyst also follows the fragmentation and replication process as frequently observed with the MgCl₂ supported Ziegler–Natta catalysts.     

A new partitioning process for high-level liquid waste by extraction chromatography using silica-substrate chelating agent impregnated adsorbents

To separate the long-lived minor actinides (MA(III) = Am(III), Cm(III)) and some specific fission products (FP) such as Pd(II), Mo(VI), Cs(I) and Sr(II) from high-level liquid waste (HLLW), we have been studying a new partitioning process by extraction chromatography using several novel silica-based extraction resins. In this work, we examined the separation behavior of the elements contained in a simulated MA-effluent by the CMPO/SiO₂P packed column. In addition, as an attempt to further isolate Am(III) and Cm(III) from the heavy RE(III) such as Eu(III), Gd(III) and Dy(III) contained in the MA-effluent, we investigated the possibility of separation by using a silica-based cationic exchange resin. Furthermore, to isolate Sr(II) from the HLLW, adsorption and separation performances of Sr(II) and some other FP elements were studied by using a novel silica-based crown ether extraction resin, DtBuCH18C6/SiO₂P. The experimental results demonstrated that the elements in the simulated MA-effluent can be successfully separated to (1) Pd, (2) MA-hRE and (3) Zr–Mo, by CMPO/SiO₂P packed column using water and a dilute DTPA solution as eluents. Am(III) and Cm(III) are expected to be effectively separated from light RE(III) and Y(III) by the SiSCR cationic resin. However, more effective separation between Am(II), Cm(III) and heavy RE(III) such as Eu(III), Gd(III) and Dy(III) needs further approach. DtBuCH18C6/SiO₂P showed a highly selective adsorption for Sr(III) so that the Sr(II) could be completely separated from other FPs except a portion of Ba(II).     

Dependence of ion selectivity on ordered orientation of neutral carriers in ion-sensing membranes based on thermotropic liquid crystals

Thermotropic liquid-crystalline compounds were applied as membrane materials (membrane solvent and neutral carrier) for neutral carrier-type ion sensors to investigate how the ordered arrangement of neutral carriers affects the property of the resulting ion sensors. Nematic, smectic, and cholesteric liquid-crystalline compounds were used as the membrane solvents and crown ether derivatives with a molecular structure similar to the liquid-crystalline solvent as the K+ neutral carriers. Polarized IR spectroscopy and X-ray diffraction experiments confirmed that the highly ordered arrangement of membrane components was retained in the liquid-crystal-based ion-sensing membranes containing a neutral carrier and a lipophilic salt. The ordered arrangement of neutral carriers in the liquid-crystalline membranes enhanced the ion selectivity significantly, probably due to the efficient cooperation of two adjacent crown ether moieties in the highly ordered and aggregated state.     

Ultrasonic speeds and densities of poly(dimethylsiloxane) (viscosity grades 30 and 50×10−4 m · s−1) at 298.15, 303.15, and 308.15 K under high pressures

The ultrasonic speeds and densities of poly(dimethylsiloxane), viscosity grades 30 and 50×10^–4 m · s^–1 at 298.15 K, were measured at 298.15, 303.15, and 308.15 K. The measurements were carried out using new apparatuses, one for measurement of the speed under pressures up to 200 MPa and another for measurement of the density under pressures up to 100 MPa. The former is constructed with a sing-around technique of the fixed-path type operated at a frequency of 2 MHz, and the latter is a dynamic bellows piezometer. The probable uncertainty in the present results is within ±0.23% for speed and ±0.19% for density for all the experimental conditions. The ultrasonic speed in these fluids at first increases rapidly with pressure and then indicates a mild rise in the highpressure region. Similar pressure effects are observed for the density. The relationship between the speed and the density satisfied a first-order function well. The isentropic compressibility, derived from the speed and density, also showed a large pressure effect. The values and its pressure effects seemed almost independent of the viscosity of poly(dimethylsiloxane).     

ALIS method for high‐resolution color PDPs

This paper describes the Alternate Lighting of Surfaces (ALIS) method as a promising drive technology which can lead to high‐resolution plasma‐display panels (PDPs). This technology provides a resolution of more than 1000 scanning lines without lowering luminance, thus enabling the essential requirements of HDTV. Moreover, it allows the number of scanning electrodes to be halved in comparison with the conventional method, as well as the circuit scale to be minimized due to the use of the single scanning drive. The ALIS method is expected to be a key technology that will help PDPs penetrate the TV market.