Two-dimensional “transXend” detector for third-generation energy-resolved computed tomography

The “transXend” detector measures X-rays as electric currents and provides the energy distribution of the measured X-rays after analysis. Capabilities of material distinction, effective atomic number measurement, and low-dose exposure computed tomography (CT) with high K-edge contrast agent from the use of the transXend detector in energy-resolved CT have been demonstrated via the first-generation CT measurements. For application of the principle of the transXend detector to the third-generation CT for human subjects in future work, a method for fabrication of a two-dimensional transXend detector is proposed and demonstrated using a commercial two-dimensional detector and two kinds of strip absorbers. The energy-resolved CT is performed by placing a proposed absorber system in front of a two-dimensional detector, which is used for conventional current measurement CT.     

Coexpression of platelet-derived growth factor receptor alpha and fetal liver kinase 1 enhances cardiogenic potential in embryonic stem cell differentiation in vitro

Nascent mesodermal cells derived from EB5 embryonic stem (ES) cells were sorted in terms of cardiogenic potential on the basis of their expression levels of platelet-derived growth factor receptor alpha (PDGFRalpha) and fetal liver kinase 1 (Flk-1). The sorted cells were cocultured with OP9 stromal cells to induce terminal differentiation into contractile cardiac colonies. A significant number of cardiac colonies were found in the Flk-1+/PDGFRalpha+ fraction. The enrichment double-positive fraction produced approximately fivefold more cardiac colonies than the Flk-1+/PDGFRalpha- fraction and 10-fold more than the Flk-1-/PDGFRalpha+ fraction. To investigate the involvement of these markers in embryonic cardiogenesis, the cells that disseminated from the E7.5-7.75 embryos were fractionated and seeded on OP9 cells. The cardiogenic potential was markedly enhanced in the Flk-1+/PDGFRalpha+ fraction. These results suggest that some of the precursor cells coexpressing these markers are selectively involved in cardiogenic events, and that the identification of ES-cell-derived precursors with these markers will contribute to the effective production of cardiomyocytes for cell therapies.     

Recovery characteristics of optical hydrogen sensor using Pd thin film: Behaviour of three-stage hydrogen desorption

The recovery behaviour of optical hydrogen sensor using Pd film has been investigated. The change in reflectance with hydrogen desorption indicated distinctive characteristics with three-stage curve which depended on thickness of the Pd film. Moreover, the distinction became clearer with increasing number of absorption-desorption cycles. These behaviours were related to the change in pressure concentration isotherm.     

Analysis of the current distortion factor of a three‐phase,three‐wire system

In a balanced three‐phase system, the three‐phase current distortion factor of three‐phase ac power sources has been expressed by applying the conventional single‐phase current distortion factor, which is defined for a single‐phase system. However, in an unbalanced three‐phase system, it is difficult to express the three‐phase current distortion factor for distorted three‐phase ac currents by means of the conventional single‐phase current distortion factor. For instance, the conventional current distortion factors for three‐phase ac currents are usually different from each other in the unbalanced three‐phase system. To solve the above problem, this paper proposes a novel definition of the three‐phase current distortion factor. The proposed three‐phase current distortion factor is quite effective for the unbalanced three‐phase system as well as the balanced three‐phase system. © 2000 Scripta Technica, Electr Eng Jpn, 131(4): 1–10, 2000     

3D Structures of IgA,IgM, and Components

Immunoglobulin G (IgG) is currently the most studied immunoglobin class and is frequently used in antibody therapeutics in which its beneficial effector functions are exploited. IgG is composed of two heavy chains and two light chains, forming the basic antibody monomeric unit. In contrast, immunoglobulin A (IgA) and immunoglobulin M (IgM) are usually assembled into dimers or pentamers with the contribution of joining (J)-chains, which bind to the secretory component (SC) of the polymeric Ig receptor (pIgR) and are transported to the mucosal surface. IgA and IgM play a pivotal role in various immune responses, especially in mucosal immunity. Due to their structural complexity, 3D structural study of these molecules at atomic scale has been slow. With the emergence of cryo-EM and X-ray crystallographic techniques and the growing interest in the structure-function relationships of IgA and IgM, atomic-scale structural information on IgA-Fc and IgM-Fc has been accumulating. Here, we examine the 3D structures of IgA and IgM, including the J-chain and SC. Disulfide bridging and N-glycosylation on these molecules are also summarized. With the increasing information of structure–function relationships, IgA- and IgM-based monoclonal antibodies will be an effective option in the therapeutic field.     

Biomaterial-Assisted Regenerative Medicine

This review aims to show case recent regenerative medicine based on biomaterial technologies. Regenerative medicine has arousing substantial interest throughout the world, with “The enhancement of cell activity” one of the essential concepts for the development of regenerative medicine. For example, drug research on drug screening is an important field of regenerative medicine, with the purpose of efficient evaluation of drug effects. It is crucial to enhance cell activity in the body for drug research because the difference in cell condition between in vitro and in vivo leads to a gap in drug evaluation. Biomaterial technology is essential for the further development of regenerative medicine because biomaterials effectively support cell culture or cell transplantation with high cell viability or activity. For example, biomaterial-based cell culture and drug screening could obtain information similar to preclinical or clinical studies. In the case of in vivo studies, biomaterials can assist cell activity, such as natural healing potential, leading to efficient tissue repair of damaged tissue. Therefore, regenerative medicine combined with biomaterials has been noted. For the research of biomaterial-based regenerative medicine, the research objective of regenerative medicine should link to the properties of the biomaterial used in the study. This review introduces regenerative medicine with biomaterial.     

Purification, characterization, and gene cloning of glycerol dehydrogenase from Hansenula ofunaensis, and its expression for production of optically active diol

Optically active alcohol is an important building block as a versatile chiral synthon for the asymmetric synthesis of pharmaceuticals and agrochemicals. We purified and characterized glycerol dehydrogenase from Hansenula ofunaensis and prepared optically active 1,2-octanediol using a recombinant Escherichia coli harboring the glycerol dehydrogenase gene. The deduced amino acid sequence was investigated for identities with those of other alcohol dehydrogenases in the NCBI databank. The identification of the unknown product of a resting-cell reaction was performed by GC-MS. In the deduced amino acid sequence composed of 376 residues, the NAD(H) binding pattern and cysteine residues that correspond to the cysteine ligands at the zinc atom were conserved as they are in alcohol dehydrogenases from other origins. Glycerol dehydrogenase from Hansenula polymorpha DL-1 (Pichia angusta, DDBJ/EMBL/GenBank accession no. BAD32688) had the highest identity to our enzyme, showing 73% identity. Our glycerol dehydrogenase catalyzed the NAD(+)-dependent oxidation of long-chain secondary alcohols such as 1,2-pentanediol, 1,2-hexanediol, 1,2-heptanediol, and 1,2-octanediol. Activities toward 2,4-pentanediol and 2,5-hexanediol were hardly detected. From these results, it was confirmed that our enzyme requires two hydroxyl groups on adjacent carbon atoms for oxidation. 2,3-Pentanedione, 2,3-hexanedione, and 3,4-hexanedione were significantly reduced. The transformants oxidized only (R)-1,2-octanediol in 50 mM racemate (R:S=52:48), and produced (S)-1,2-octanediol (24 mM, <99.9% e.e.) after 24 h of incubation. The reaction product was suggested to be 1-hydroxy-2-octanone by GC-MS, which showed secondary hydroxyl groups oxidized. Glycerol dehydrogenase from H. ofunaensis could be useful for the production of long-chain optically active secondary alcohols.     

Development of butt welding of polymeric materials based on softening and stirring effects by hot tool

In this study, new butt welding technique was proposed to join polymeric materials in which the polymeric material is softened by a heated tool due to the Joule effect heating of the electric current flow through the tool, and the coalescence of material is done by the stirring action due to the tool rotation. A 3 mm-thick Polycarbonate (PC) sheets were joined in various joining conditions, from which joining mechanism, mechanical properties of joints and process parameters affecting joint performance were investigated. In the experiments, in situ observation with a CCD camera and material temperature measurement during the process, as well as the observation of surface appearance and cross section of the joint and tensile test were performed for these purposes. It was shown from the in situ observation and material temperature measurement that the molten and softened region is formed around the weld tool. It was also shown that sufficient heat input was required to form sound joints with acceptable performance, which depended upon the joining speed and amount of electric current flow through the tool. The observation of joint appearance and cross section revealed that the joint with comparable thickness to base material was obtained under the condition of revolution pitch below 0.08 mm, defined by the ratio of joining speed to tool rotation. It is noticed that joints obtained from the proper conditions have the same mechanical properties as the base material, and that the process parameters of this method were tool rotation speed, welding speed and amount of electric current. These results suggest proposed method is useful for joining the polymeric materials.     

Computed tomography reconstruction from two transmission measurements for iodine-marked cancer detection

The authors invented the transXend detector, which measures X-rays as electric currents, and then gives the energy distribution of the X-rays after an unfolding process. In a previous paper, it was shown that the material thickness distributions can be estimated with the transXend detector by using reference points plotted from the electric current ratios, such as the I ₂/I ₁ ? I ₃/I ₁ graph, where I_i denotes the electric current measured by the i-th segment of the transXend detector. In this paper, the tomographic images of iodine, aluminum, and the acrylic those surround the other two materials are reconstructed from their material thickness distributions, which are estimated from two X-ray incidence directions. The X-ray event ratios are also used to estimate the material thickness distributions.     

Low-dose exposure energy-resolved X-ray computed tomography using a contrast agent with a high-energy K-edge

X-ray computed tomography (CT) with iodine contrast agent is widely employed to locate cancers. However, this method has shortcomings such as high-radiation dose exposure, iodine side effects, and a beam hardening effect. We have been working on the energy-resolved CT measurement method using a novel X-ray detection system, the “transXend” detector, which measures X-rays as electric currents and gives the energy distribution of incident X-rays after analysis. In the present study, we propose a method for low-dose exposure CT that involves the combination of the energy-resolved CT method, which is free from the beam hardening effect, and a harmless contrast agent with high-energy K-edge absorption, such as gold nanoparticles expected as a future contrast agent. Comparisons of radiation dose exposures as functions of aluminum filter thickness at the exit aperture of an X-ray tube and the K-edge energies of contrast agents are described.