Assessment of disease activity in rheumatoid arthritis using magnetic resonance imaging: quantification of pannus volume in the hands

We attempted to assess whether pannus volume measured by magnetic resonance imaging (MRI) can be used as an indicator of disease activity in rheumatoid arthritis (RA). Eleven women (mean age 46 yr) with uncontrolled RA were studied for 1 yr. Pannus formation in both hands was quantified using MRI at the start of the study, and at 6 and 12 months thereafter. The volume of enhancing pannus (VEP) was compared with changes in the radiological scores, grip strength, joint tenderness counts, joint swelling counts, erythrocyte sedimentation rate (ESR), and serum C-reactive protein (CRP). Patients were classified into three groups based on VEP changes between 0 and 12 months: unchanged (n = 2), decreased (n = 6) and increased (n = 3). VEP at 6 months and at 12 months differed significantly between the three groups. No statistically significant differences were found between the groups in radiographic scores, physical parameters or laboratory parameters despite the fact that some of these parameters changed in the direction indicated by the changes in VEP. VEP can be used as a new indicator to assess disease activity in individual RA patients and, using this parameter, treatment outcome can be assessed in fewer subjects than with traditional measures.     

Composite of Au nanoparticles and molecularly imprinted polymer as a sensing material

A molecularly imprinted polymer with immobilized Au nanoparticles (Au-MIP) is reported as a novel type of sensing material. The sensing mechanism is based upon the variable proximity of the Au nanoparticles immobilized in the imprinted polymer, which exhibits selective binding of a given analyte accompanied by swelling that causes a blue-shift in the plasmon absorption band of the immobilized Au nanoparticles. Using adrenaline as the model analyte, it was shown that molecular imprinting effectively enhanced the sensitivity and selectivity, and accordingly, Au-MIP selectively detects the analyte at 5 microM. The combination of molecular imprinting and the Au nanoparticle-based sensing system was shown to be a general strategy for constructing sensing materials in a tailor-made fashion due to wide applicability of the imprinting technique and the independence of the sensing mechanism from the analyte recognition system.     

Germanium-oxide glass optical fibre prepared by VAD method

Germanium-oxide glass optical fibre doped with antimony for transmission of the 2 to 3 ?m band has been prepared by the vapour-phase axial deposition (VAD) method. An attenuation loss of 13 dB/km at 2.05 ?m and 70 dB/km at 2.4 ?m has been achieved.     

MolSpace: a computer desktop tool for visualization of massive molecular data

The authors have developed a software tool, MolSpace, to visualize massive molecular datasets. MolSpace can project a set of massive multivariate data onto a visual space (two- or three-dimensional space) by means of principal component analysis. MolSpace allows users not only to draw a scatter diagram of the data but also to display their two- or three-dimensional molecular structures as the objects in that space. With a probe (a molecular object) the user can navigate vast data spaces, thus facilitating understanding of the data structure. In addition, partial space searching is also available that is based on similarity searching techniques. It is possible to interrogate a three-dimensional structure of a chemical compound that corresponds to each object on the space in real time. The detail of the system is discussed with an illustrative example.     

Optical design of a hollow cube-corner retroreflector for a geosynchronous satellite

The optical characteristics of a single-element hollow cube-corner retroreflector for a geosynchronous satellite were numerically evaluated for laser ranging and laser long-path absorption measurements of atmospheric species. An optical design with spherical surfaces and tuned dihedral angles was considered to compensate for velocity aberrations. The parameters for the retroreflector were optimized with genetic algorithms for different retroreflector sizes and wavelengths (500 nm and 1, 3, and 10 mum). We found that 20-cm retroreflectors are sufficient for realistic measurements when the laser wavelength is 500 nm or 1 mum. However, a larger retroreflector is necessary to overcome the detector noise level at 3 and 10 mum.     

Fine silicon carbide fibers synthesized from polycarbosilane-polyvinylsilane polymer blend using electron beam curing

A fine SiC fiber is synthesized from a polymer blend of polycarbosilane (PCS) and polyvinylsilane (PVS) with electron beam curing under vacuum. The obtained SiC fiber from the PCS-PVS blend polymer has smaller average diameter of 8.5 m than that of 11.8 m from PCS, and shows higher average tensile strength of 3.2 GPa than that of 2.8 GPa from PCS after heat treatment at 1673 K in Ar gas atmosphere. However, the SiC fiber from the polymer blend decreases in tensile strength after heat treatment above 1773 K due to -SiC crystal growth near the fiber surface, because of a small amount of oxygen incorporated in the fiber.     

Role of plasticity on interface crack initiation from a free edge and propagation in a nano-component

In order to elucidate the role of plasticity on interface crack initiation from a free edge and crack propagation in a nano-component, delamination experiments were conducted by a proposed nano-cantilever bend method using a specimen consisting of ductile Cu and brittle Si and by a modified four-point bend method. The stress fields along the Cu/Si interface at the critical loads of crack initiation and crack propagation were analyzed by the finite element method. The results reveal that intensified elastic stresses in the vicinity of the interface edge and the crack tip are very different, although the Cu/Si interface is identical in both experiments. The plasticity of Cu was then estimated on the basis of the nano-cantilever deflection measured by in situ transmission electron microscopy. The plasticity affects the stress fields; the normal stress near the interface edge is intensified while that near the crack tip is much reduced. Both the elasto-plastic stresses are close to each other in the region of about 10 nm. This suggests that the local interface fracture, namely, the crack initiation at the interface edge and the crack propagation along the interface, is governed by elasto-plastic normal stress on the order of 10 nm.     

Formation of the myosin.ADP.gallium fluoride complex and its solution structure by small-angle synchrotron X-ray scattering

The products of the SOS-regulated umuDC operon are required for most UV and chemical mutagenesis in Escherichia coli, a process that results from a translesion synthesis mechanism. The UmuD protein is activated for its role in mutagenesis by a RecA-facilitated autodigestion that removes the N-terminal 24 amino acids. A previous genetic screen for nonmutable umuD mutants had resulted in the isolation of a set of missense mutants that produced UmuD proteins that were deficient in RecA-mediated cleavage (J. R. Battista, T. Ohta, T. Nohmi, W. Sun, and G. C. Walker, Proc. Natl. Acad. Sci. USA 87:7190-7194, 1990). To identify elements of the UmuD' protein necessary for its role in translesion synthesis, we began with umuD', a modified form of the umuD gene that directly encodes the UmuD' protein, and obtained missense umuD' mutants deficient in UV and methyl methanesulfonate mutagenesis. The D39G, L40R, and T51I mutations affect residues located at the UmuD'2 homodimer interface and interfere with homodimer formation in vivo. The D75A mutation affects a highly conserved residue located at one end of the central strand in a three-stranded beta-sheet and appears to interfere with UmuD'2 homodimer formation indirectly by affecting the structure of the UmuD' monomer. When expressed from a multicopy plasmid, the L40R umuD' mutant gene exhibited a dominant negative effect on a chromosomal umuD+ gene with respect to UV mutagenesis, suggesting that the mutation has an effect on UmuD' function that goes beyond its impairment of homodimer formation. The G129D mutation affects a highly conserved residue that lies at the end of the long C-terminal beta-strand and results in a mutant UmuD' protein that exhibits a strongly dominant negative effect on UV mutagenesis in a umuD+ strain. The A30V and E35K mutations alter residues in the N-terminal arms of the UmuD'2 homodimer, which are mobile in solution.     

High-temperature pyrolysis of ceramic fibers derived from polycarbosilane–polymethylhydrosiloxane polymer blends with porous structures

The polymer blends of PCS (polycarbosilane) and PMHS-h (polymethylohydrosiloxane with high molecular weight) were prepared by freeze-drying process of mixed benzene solution. Melt viscosity, mass loss, and gas evolution from prepared polymer blends were analyzed. A polymer blend of HSah15 (15 mass% PMHS-h to PCS) was melt-spun to fiber form, curing by thermal oxidation and pyrolyzed at various temperatures up to 1773 K. The obtained fibers were investigated by tensile tests, FE-SEM (field emission scanning electron microscope) observation, and XRD (X-ray diffraction) analysis. After pyrolysis at 1273 K, there were no pores in the cross section of the fiber derived from pure PCS; however, there were amounts of pores in the cross sections of the fiber derived from HSah15. After pyrolysis at 1773 K, the coarse β-SiC (silicon carbide) crystals were formed on the outside surface of the fiber derived from pure PCS; however, no remarkable β-SiC crystal were formed on the outside surface of the fiber derived from HSah15.