Preparation of Ba(Mg1/3Ta2/3)O3 Using Oxine

A solution containing Mg²⁺ and Ta⁵⁺ was added to an aqueous ammonia solution of oxine, resulting in a precipitate. After the precipitate was thermally decomposed and fired, it was mixed with BaCO₃ powder and fired again at high temperatures to obtain Ba(Mg_1/3Ta_2/3)O₃ (BMT). This method resulted in BMT formation at temperatures lower than those used in the conventional mixed-oxide method, and single-phase BMT formed directly at 1300°C without intermediates.     

Synthesis of Compositionally Homogeneous Sr(CuxZn1−x)1/2W1/2O3

A complex perovskite of Sr(Cu _x Zn_{1- x} )_1/2 W_1/2O₃ (SCZW) is synthesized by a new combination of wet and dry processess. Mixed oxides containing Cu²⁺ and Zn²⁺ (CZ) are prepared by the wet process (coprecipitate method). SCZW is obtained by the dry process (mixed-oxide method) from a mixture of CZ, SrCO₃, and WO₃. SCZW has practically no compositional, unlike solid solutions prepared by the conventional dry method. The wet–dry process method is useful because the wet process is applied to only B-site cations having the same valence.     

Dietary CLA and DHA modify skin properties in mice

This study investigated the influence of PUFA on the properties of mouse skin. Mice (3 wk old) were given free access to oils high in linoleic acid, CLA, or DHA for 4 wk. At the end of the experiment, their skins were compared by both biochemical and histological methods. No significant differences in lipid and collagen contents were detected among treatments, although the FA composition in the skin was altered depending upon the FA composition of the supplemented oils. Electron microscopy revealed that the subcutaneous tissue layers in the CLA and DHA groups were significantly thinner than that in the high linoleic acid group, whereas no differences in the thickness of dermis layers were observed among the three groups. These results suggest that skin properties in mice are readily modified by dietary FA sources within 4 wk of dietary oil supplementation.     

Nanoscale molecular cavity in crystalline polymer membranes studied by molecular dynamics simulation

The size, shape, and connectivity of cavities in the crystals of syndiotactic polystyrene were investigated by molecular dynamics simulation. Cluster analysis of the free volume in the crystals clearly reveals the cavity structures: large individual holes are in an orderly manner connected by narrow channels. We call such a cavity structure a ‘molecular cavity’. The diffusion behavior and solubility of gases in the molecular cavity were also simulated. The extremely high solubility of a larger gas and the controllable diffusion path in the narrow channels proved the applicability of the concept of the molecular cavity to high performance separation membranes.     

Simple,Mild, and Practical Esterification,Thioesterification, and Amide Formation Utilizing p‐Toluenesulfonyl Chloride and N‐Methylimidazole

We have developed an efficient method for the esterification or thioesterification of equimolar amounts of carboxylic acids and alcohols or thiols using a novel reagent, p‐toluenesulfonyl chloride (TsCl) together with N‐methylimidazole. The present method is simple, mild, and reactive, uses readily available and economical reagents. The choice of amine is critical for the present method. The amine, N‐methylimidazole, has two roles: (i) as an HCl scavenger for the initial smooth generation of mixed anhydrides between carboxylic acids and TsCl and (ii) successive formation of highly reactive ammonium intermediates from mixed anhydrides. This method could be applied to various types of carboxylic acids, alcohols, and thiols: a) several functionalities were tolerated; b) two N‐Cbz amino acids were smoothly esterified without racemization; and c) the labile 1β‐methylcarbapenem key intermediate and a pyrethroid insecticide, prallethrin, were successfully prepared. The related amide formation between carboxylic acids and primary or secondary amines was also performed. The proposed reaction mechanism involves a novel method for producing the reactive acylammonium intermediates. The production of these intermediates was rationally supported by a careful ¹H NMR monitoring study.     

ION-EXCHANGE PROPERTIES OF HYDROUS TITANIUM DIOXIDE WITH A FIBROUS FORM OBTAINED FROM POTASSIUM DITITANATE

ABSTRACT

Ion-exchange properties of a new type of hydrous titanium dioxide with a fibrous form, which was obtained from potassium dititanate (K₂O(TiO₂)2), have been studied. The pH titration curve snowed that this material behaved as a bifunctional ion-exchanger. Distribution coefficients of some divalent metal ions on this material were measured as a function of pH and the selectivity series were found to be Ba > Sr > Ca > Mg for alkaline earth metal ions and Cu > Zn > Mn > Co > Ni for divalent transition metal ions. Large separation factors were obtained between some metal ion pairs and the mutual separations such as Cu from Sr, Ca, Mg, Co and Ni, and Mg from Ba and Zn have been achieved on columns of this material.     

R & D Needs - Drying of Ceramics

ABSTRACT

New research and development needs for the drying of ceramics are prooosed. The researches on the ceramic drying are briefly reviewed and the role of the drying in the ceramic production process iS summarized. The drying must deal with molded materials and the problem is of significant difference from another drying with particulate materials. It means that the drying must be performed with keeping the molded feature and the insufficient completion of drying and the careless operation influence directly on the product quality The importnance of the R & D on the heat and moisture transfer. shrinking mechanism. the deformation behavior and the strain-stress formation in the molded clay issuggested. The subjects are also pointed out for the further improvement of the ceramic drying process and the precise design of molding with high quality.     

EFFECT OF INTERMITTENT HEATING ON DRYING-INDUCED STRAIN-STRESS OF MOLDED CLAY

ABSTRACT

Parametric analyses of the strain-stress in the drying process are performed to study the influence of the intermittent drying on the behaviors of drying-induced strain-stress and deformation as well as the drying characteristic. The transient three-dimensional problem of strain-stress and heat and moisture transfer in a slab is solved simultaneously by the finite element method. The dimensionless parameters are introduced to generalize the problem in the conservation equations of heat and moisture transfer. The intermittent drying is modeled by applying periodically smaller and larger Biot numbers to the boundary conditions. The maximum tensile and compressive stresses fluctuate, and fall remarkably during the smaller Biot number period when a slab is heated intermittently. The peak stress of the fluctuation exceeds beyond the case in the continuous healing where the overall drying rate is almost equivalent to that in the intermittent beating, but the reduction of the stresses takes place rapidly in the low heating period.     

ADSORPTION BEHAVIOR OF COBALT( II) IONS ON LAYERED DIHYDROGEN TETRATITANATE HYDRATE FIBERS IN AQUEOUS SOLUTIONS IN THE RANGE FROM 298 to 523 K

The adsorption properties of cobalt(II) ions have been studied on layered dihydrogen tetratitanate hydrate fibers, H₂Ti₄O₉,?nH₂O, in the temperature range from 298 to 523?K. The distribution coefficients of the adsorption of cobalt (II) ions were increased with increasing temperatures up to 367?K, but were decreased in the temperature range between 367 and 523?K. The X-ray powder diffraction patterns of the fibers indicate that the fibers hold layer structure up to 367?K, but change to low crystalline anatase or its precursor above that temperature. It is notable that the material has the capability of cobalt (II) adsorption even at 523?K, although the maximum is present at 367?K.