Modeling of ion-bombardment damage on Si surfaces for in-line analysis

Structures and mechanism of ion-bombardment damage on silicon wafers exposed to plasma were investigated comprehensively. By using molecular dynamics simulations high-resolution transmission electron microscopy, and composition analysis by high-resolution Rutherford backscattering spectroscopy, features such as gradual transition from the SiO₂ surface to the Si substrate and interface roughness were addressed. On the basis of these findings, the optical model that addresses the characteristics of plasma-damaged Si surfaces is given for ellipsometric analysis. The proposed model includes an interface layer modeled as a mixture of SiO₂ and Si phases. A part of the interface layer could not be removed by wet-etching, signifying the distinct features of the interface layer that are difficult to remove. The proposed model is anticipated to be practical for in-line monitoring of plasma-induced damage.     

基于荧光显微镜的毛细管电泳系统的构建

毛细管电泳仪具有灵敏度高、分析速度快等优势,为降低其生产成本,基于电泳原理,以荧光显微镜为基础,设计了一套毛细管电泳系统。以20 bp(base pairs,碱基对)DNA ladder和100 bp DNA ladder为样本,全面分析了系统的稳定性、灵敏度和分离效果。结果表明:该系统在9 min内可以实现1500 bp以内DNA片段的高效分离,系统检测极限为0.1 ng/μL;在优化的电泳条件下,对限制性内切酶φX174-HincⅡ作用过的λ-DNA片段5 min内实现了291 bp与297 bp DNA片段的区分。     

Intermittent Hypoxia Increased the Expression of DBH and PNMT in Neuroblastoma Cells via MicroRNA-375-Mediated Mechanism

Sleep apnea syndrome (SAS), characterized by recurrent episodes of oxygen desaturation and reoxygenation (intermittent hypoxia (IH)), is a risk factor for hypertension and insulin resistance. We report a correlation between IH and insulin resistance/diabetes. However, the reason why hypertension is induced by IH is elusive. Here, we investigated the effect of IH on the expression of catecholamine-metabolizing enzymes using an in vitro IH system. Human and mouse neuroblastoma cells (NB-1 and Neuro-2a) were exposed to IH or normoxia for 24 h. Real-time RT-PCR revealed that IH significantly increased the mRNA levels of dopamine β-hydroxylase (DBH) and phenylethanolamine N-methyltransferase (PNMT) in both NB-1 and Neuro-2a. Western blot showed that the expression of DBH and PNMT in the NB-1 cells was significantly increased by IH. Reporter assays revealed that promoter activities of DBH and PNMT were not increased by IH. The miR-375 level of IH-treated cells was significantly decreased relative to that of normoxia-treated cells. The IH-induced up-regulation of DBH and PNMT was abolished by the introduction of the miR-375 mimic, but not by the control RNA. These results indicate that IH stress increases levels of DBH and PNMT via the inhibition of miR-375-mediated mRNA degradation, potentially playing a role in the emergence of hypertension in SAS patients.     

IGCC系统中空气气化炉与氧气气化炉的对比研究

目前国内对IGCC的研究形成一股热潮,发表了不少研究结果和文章,但都集中在纯氧气流床气化工艺。日本三菱公司近二十年来致力于空气气化IGCC系统的研究,其示范电厂将于2007年投运,但国内对这方面的信息和了解不多。本文基于文献和作者对开发空气气化IGCC系统的三菱长崎研究所的访问和调研,采用Aspen Plus软件,对此系统作了详细分析,并与Shell气化炉和IGCC系统作了对比,得出了一些有益的结论。     

Measurement of vertical and horizontal vibrations of a probe for acoustic evaluation of food texture

Two‐dimensional (vertical and horizontal) vibrations of a wedge‐type probe upon food rupture were evaluated separately using two accelerometers placed perpendicular to a guide rod of a swing‐arm device for texture evaluation of the flesh of three varieties of apples and three types of potato chips. Voltage signals from the accelerometers were filtered using a half‐octave band‐pass filter. The energy texture index (ETI), based on kinetic energy of the vertical or horizontal probe vibrations, was calculated over low to high frequency bands (no. 1–21). The spectra for the flesh of the three varieties of apples included two common peaks for vertical ETI at band no. 11 (1,120–1,600 Hz) and 19 (17,920–25,600 Hz) and horizontal ETI at band no. 1 (0–10 Hz) and 15 (4,480–6,400 Hz). The spectra for the three types of potato chips had a common ETI peak at band no. 11 (1,120–1,600 Hz) for horizontal ETI and at no. 15 (4,480–6,400 Hz) for vertical ETI. The three apple varieties gave rise to different intensities of vertical and horizontal ETIs while the two peaks were maintained. The thick potato chip type had higher vertical and horizontal ETIs than the thin and soft varieties in most bands; however, the thin type had the highest vertical ETIs only in lower bands (0–200 Hz). The soft type had the lowest vertical and horizontal ETI. The above results suggest that different food textures can be distinguished by two‐dimensional vibration analyses of probe insertion into a food sample based on frequency bands.     

Towards the improvement of thermal efficiency in lignite‐fired power generation: Concerning the utilization of Polish lignite deposits in state‐of‐the‐art IGCC technology

Integrated coal Gasification Combined Cycle (IGCC) is the most advanced technology for coal‐fired power generation. The two‐stage entrained flow gasification process allows for the use of a wide range of coal, as long as the gasification temperature is above the ash melting point of a used fuel. In this gasification technology, lignite, which often has a low ash melting point, can be preferably utilized. However, ash fluidity is also another importance, because the behaviour of molten slag can diminish a stable ash discharge from a gasifier. As the eligibility of coal ash properties is a considerable factor, water physically and chemically kept in lignite (30 – 60% in mass) attributes to deteriorating gasification efficiency, because it causes significant heat loss and increasing oxygen consumption. Developing a thermal evaporative lignite drying method will be a necessary attempt to apply lignite to the coal gasification process. For those preceded objectives, coal and ash properties and drying characteristics of several grades of Polish lignite, extracted from Belchatow and Turow deposits, have been experimentally investigated in a preliminary study evaluating the applicability and consideration for its utilization in state‐of‐the‐art clean coal technology, IGCC. This paper particularly discusses the eligibility of Polish lignite from the perspective of the fusibility and fluidity of ash melts and the fundamental drying kinetics of lignite in superheated steam in the light of water removal. The viscosity of ash melts is measured at high temperature up to 1700 °C. In the drying tests, the significant influence of structural issues, because of the provenance and origin of lignite on the drying characteristics, was found by applying the method of sensitivity analysis of physical propensity. This paper concludes that the investigated Polish lignite has characteristics favourable for utilization in IGCC technology, once the precautions related to its high moisture have been carefully addressed. Copyright © 2016 John Wiley & Sons, Ltd.     

Regional forecasts of photovoltaic power generation according to different data availability scenarios: a study of four methods

The development of methods to forecast photovoltaic (PV) power generation regionally is of utmost importance to support the spread of such power systems in current power grids. The objective of this study is to propose and to evaluate methods to forecast regional PV power 1 day ahead of time and to compare their performances. Four forecast methods were regarded, of which two are new ones proposed in this study. Together, they characterize a set of forecast methods that can be applied in different scenarios regarding availability of data and infrastructure to make the forecasts. The forecast methods were based on the use of support vector regression and weather prediction data. Evaluations were performed for 1 year of hourly forecasts using data of 273 PV systems installed in two adjacent regions in Japan, Kanto, and Chubu. The results show the importance of selecting the proper forecast method regarding the region characteristics. For Chubu, the region with a variety of weather conditions, the forecast methods based on single systems' forecasts and the one based on stratified sampling provided the best results. In this case, the best annual normalized root mean square error (RMSE) and mean absolute error (MAE) were 0.25 and 0.15 kWh/kWh_avg, respectively. For Kanto, with homogeneous weather conditions, the four methods performed similarly. In this case, the lowest annual forecast errors were 0.33 kWh/kWh_avg for the normalized RMSE and 0.202 kWh/kWh_avg for the normalized MAE. Copyright © 2014 John Wiley & Sons, Ltd.