Oligomer-Rich Fraction from Polydisperse Sample of Poly(bis(β-phenoxyethoxy)phosphazene)

Poly[bis(-phenoxyethoxy)phosphazene] [PBPEP] had been shown in our previous paper to be a very useful polymer for investigating the crystallization mechanism of polymers, as the crystallization rate of PBPEP is extraordinarily small when isothermally crystallized from the melt. The crystallization of the low molecular weight oligomers of PBPEP was first studied in comparison to the high molecular weight polymers. The oligomer-rich fraction was obtained by fractionation of the as-polymerized sample, which had a broad molecular weight distribution. The fractions thus obtained were characterized by solution viscometry and size exclusion chromatography. The melting temperature and the growth rate of the spherulite from the melt were investigated by differential scanning calorimetry and optical microscopy. The growth rate was one or two orders of magnitude smaller in the oligomer-rich fraction than in the other high molecular weight fractions. A collapsed spherulite appeared in the oligomer-rich fraction at high crystallization temperatures. It is speculated that in the oligomer-rich fraction there is an excess free energy due to defects in the crystal phase. This defect is considerably larger in the oligomer-rich fraction than in the other fractions because a large quantity of short length chains is present.     

Synthesis of Compositionally Homogeneous Sr(CuxZn1−x)1/2W1/2O3

A complex perovskite of Sr(Cu _x Zn_{1- x} )_1/2 W_1/2O₃ (SCZW) is synthesized by a new combination of wet and dry processess. Mixed oxides containing Cu²⁺ and Zn²⁺ (CZ) are prepared by the wet process (coprecipitate method). SCZW is obtained by the dry process (mixed-oxide method) from a mixture of CZ, SrCO₃, and WO₃. SCZW has practically no compositional, unlike solid solutions prepared by the conventional dry method. The wet–dry process method is useful because the wet process is applied to only B-site cations having the same valence.     

Implicit Formulation for SPH‐based Viscous Fluids

We propose a stable and efficient particle‐based method for simulating highly viscous fluids that can generate coiling and buckling phenomena and handle variable viscosity. In contrast to previous methods that use explicit integration, our method uses an implicit formulation to improve the robustness of viscosity integration, therefore enabling use of larger time steps and higher viscosities. We use Smoothed Particle Hydrodynamics to solve the full form of viscosity, constructing a sparse linear system with a symmetric positive definite matrix, while exploiting the variational principle that automatically enforces the boundary condition on free surfaces. We also propose a new method for extracting coefficients of the matrix contributed by second‐ring neighbor particles to efficiently solve the linear system using a conjugate gradient solver. Several examples demonstrate the robustness and efficiency of our implicit formulation over previous methods and illustrate the versatility of our method.     

Visual simulation of mixed-motion avalanches with interactions between snow layers

In the field of computer graphics, simulation of fluids, including avalanches, is an important research topic. In this paper, we propose a method to simulate a kind of avalanche, mixed-motion avalanche, which is usually large and travels down the slope fast, often resulting in impressive visual effects. The mixed-motion avalanche consists of snow smokes and liquefied snow which form an upper suspension layer and a lower dense-flow layer, respectively. The mixed-motion avalanche travels down the surface of the snow-covered mountain, which is called accumulated snow layer. We simulate a mixed-motion avalanche taking into account these three snow layers. We simulate the suspension layer using a grid-based approach, the dense-flow and accumulated snow layer using a particle-based approach. An important contribution of our method is an interaction model between these snow layers that enables us to obtain the characteristic motions of avalanches, such as the generation of the snow smoke from the head of the avalanche.     

Mass recovery adsorption refrigeration cycle—improving cooling capacity

The study investigates the performance of two-bed, silica gel-water adsorption refrigeration cycle with mass recovery process. The cycle with mass recovery can be driven by the relatively low temperature heat source. In an adsorption refrigeration cycle, the pressures in adsorber and desorber are different. The chiller with mass recovery process utilizes the pressure difference to enhance the refrigerant mass circulation. Cooling capacity and coefficient of performance (COP) were calculated by cycle simulation computer program to analyze the influences of operating conditions. The mass recovery cycle was compared with conventional cycle such as the single stage adsorption cycle in terms of cooling capacity and COP. The results show that the cooling capacity of mass recovery cycle is superior to that of conventional cycle and the mass recovery process is more effective for low regenerating temperature.     

Modeling of ion-bombardment damage on Si surfaces for in-line analysis

Structures and mechanism of ion-bombardment damage on silicon wafers exposed to plasma were investigated comprehensively. By using molecular dynamics simulations high-resolution transmission electron microscopy, and composition analysis by high-resolution Rutherford backscattering spectroscopy, features such as gradual transition from the SiO₂ surface to the Si substrate and interface roughness were addressed. On the basis of these findings, the optical model that addresses the characteristics of plasma-damaged Si surfaces is given for ellipsometric analysis. The proposed model includes an interface layer modeled as a mixture of SiO₂ and Si phases. A part of the interface layer could not be removed by wet-etching, signifying the distinct features of the interface layer that are difficult to remove. The proposed model is anticipated to be practical for in-line monitoring of plasma-induced damage.     

基于荧光显微镜的毛细管电泳系统的构建

毛细管电泳仪具有灵敏度高、分析速度快等优势,为降低其生产成本,基于电泳原理,以荧光显微镜为基础,设计了一套毛细管电泳系统。以20 bp(base pairs,碱基对)DNA ladder和100 bp DNA ladder为样本,全面分析了系统的稳定性、灵敏度和分离效果。结果表明:该系统在9 min内可以实现1500 bp以内DNA片段的高效分离,系统检测极限为0.1 ng/μL;在优化的电泳条件下,对限制性内切酶φX174-HincⅡ作用过的λ-DNA片段5 min内实现了291 bp与297 bp DNA片段的区分。     

Intermittent Hypoxia Increased the Expression of DBH and PNMT in Neuroblastoma Cells via MicroRNA-375-Mediated Mechanism

Sleep apnea syndrome (SAS), characterized by recurrent episodes of oxygen desaturation and reoxygenation (intermittent hypoxia (IH)), is a risk factor for hypertension and insulin resistance. We report a correlation between IH and insulin resistance/diabetes. However, the reason why hypertension is induced by IH is elusive. Here, we investigated the effect of IH on the expression of catecholamine-metabolizing enzymes using an in vitro IH system. Human and mouse neuroblastoma cells (NB-1 and Neuro-2a) were exposed to IH or normoxia for 24 h. Real-time RT-PCR revealed that IH significantly increased the mRNA levels of dopamine β-hydroxylase (DBH) and phenylethanolamine N-methyltransferase (PNMT) in both NB-1 and Neuro-2a. Western blot showed that the expression of DBH and PNMT in the NB-1 cells was significantly increased by IH. Reporter assays revealed that promoter activities of DBH and PNMT were not increased by IH. The miR-375 level of IH-treated cells was significantly decreased relative to that of normoxia-treated cells. The IH-induced up-regulation of DBH and PNMT was abolished by the introduction of the miR-375 mimic, but not by the control RNA. These results indicate that IH stress increases levels of DBH and PNMT via the inhibition of miR-375-mediated mRNA degradation, potentially playing a role in the emergence of hypertension in SAS patients.     

IGCC系统中空气气化炉与氧气气化炉的对比研究

目前国内对IGCC的研究形成一股热潮,发表了不少研究结果和文章,但都集中在纯氧气流床气化工艺。日本三菱公司近二十年来致力于空气气化IGCC系统的研究,其示范电厂将于2007年投运,但国内对这方面的信息和了解不多。本文基于文献和作者对开发空气气化IGCC系统的三菱长崎研究所的访问和调研,采用Aspen Plus软件,对此系统作了详细分析,并与Shell气化炉和IGCC系统作了对比,得出了一些有益的结论。